Nail Gun Air Compressor - 1   2   3   4
2-1/2" Finish Nailer/Compressor Combo Pack | Porter-Cable CFFN250A
Porter-Cable CFFN250A
$590.00
by Porter-Cable

One-Year Warranty/30-Day Performance Certification
Oil-free compressor can operate on slopes without risk of leaks
Rugged, top load magazine for easy reloading
Depth-of-drive adjustment to match nail depth to the application
Quick release nosepiece for easy clearing of jams

found in CFFN250A's reviews:
Love it!!! - I told my husband that I was in love again- with my nail gun. I have look for months into every brand, and asked people that I know about their preferences in nail guns. It has cut hours off of my time in nailing moldings and trim on the furniture that I make.
Phil Mescher from Ames, Iowa - I definately recommend this combo package to anyone wanting to start working with air nailers. I have installed a lot of trim the old way by drilling pilot holes and hammering in the finish nails and then using a nail set to countersink the nail head. Now I plan on buying a Porter Cable framing nailer.
Best Tool I Own Hands Down! - I plan on replacing all of the crown molding utilizing my Porter Cable Finish Nailer and Pancake Compressor combo and my DeWalt 12" Combo miter Saw. You may want to keep a nail set and a hammer around though as I have had occasional nail heads stick up. However, this only happens about 1 in 50 nails that I've driven.
excellent product - I bought this after folishly trying to put ~300lft of oak baseboard by hand nailing without drilling pilot holes. I had no mis-fires, and each nail was perfectly countersunk for easy finishing. So far I have driven about 600 nails with no problems and I also use this to do small flooring jobs for other people.
PORTER CABLE NAILED THIS ONE - IT WILL SHOOT A WIDE RANGE OF NAILS. IT WILL SHOOT THE 2 1/2 NAILS WITHOUT ANY TROUBLE. THE GUN HAS NEVER JAMMED, IT IS VERY EASY TO CONTROL THE DEPTH OF THE NAIL EITHER FROM THE ADJUSTMENT ON THE GUN OR THE REGULATOR ON THE COMPRESSOR. THE COMPRESSOR ALWAYS HAS SUFFICIENT AIR. IF THIS BOTHERS YOU GET A LONGER AIR HOSE AND KEEP THE UNIT OUTSIDE. THIS COMPRESSOR SHOULD FIRE A FRAMING NAILER AS WELL, BUT IT WILL RUN MORE OFTEN.
What a great value! - The range of nail sizes which can be used with this nailer make it an excellent choice for all types of projects from crown molding to fine furniture. I shopped several retail stores, catalogs, and home improvement centers for comparable prices and values and this combination, with nailer, compressor, and all the needed hoses and fittings was, by far, the best value I was able to find. Most nailers alone cost more than this set and the quality of the tools was all I had hoped it would be. I also enjoyed the convenience of ordering the nails I needed for each project on the same site as the tools themselves.
This Combo will have your project nailed down !!! - The nose piece make it easy to get the nails just were you want them everytime. And with the depth adjustment on the gun you can quickly change settings. It a great value and for those woodworkes who want a air nailer this combo should fit the bill. I sure there are those who may feel that an air nailer is just for those to lazy to nail by hand there not if you've ever made small boxes and tryed nailing them together you know it not and easy task. Get one and start getting you next wookworking project nailed down.
Round Head Framing Nailer and Compressor Combo Kit | Porter-Cable CFFR350B
Porter Cable CFFR350B
$875.00
by Porter Cable

Additional features: tool-free adjustable depth of drive, nail lock out mechanism, tool-free adjustable exhaust, ???? air fitting, removable non-marring nose tip
Selectable trigger, restrictive or contact actuation mode
Power to drive nails (up to 3-1/2" x .131") into engineered lumber
Delivers twice the life over previous tools
Uses standard 22 degree 2" to 3-1/2" x .113" to .131" plastic collated round head framing nails.

found in CFFR350B's reviews:
good stuff so far - I owned the previous version of this gun - it was stolen - and the new version is improved in many little ways - better nail loading, better nose guard, better hose angle, etc
the compressor is new to me
quieter than my Emglo (a lot) and seems robust and powerful
the whole wheel/pullcart thing is a little cumbersome - it's a little too heavy to pick up and carry around, but a little to light to be designed like a rolling suitcase
but it's red, and that makes up for a lot.

13.5 Amp 2 Horsepower 4 Gallon Oil-Free Twin Hot Dog Compressor | Thomas Compressors T-2820ST
Thomas Compressors T-2820ST
$649.00 >> $489.00
by Thomas Compressors

20 by 15.6 by 16.5; 71 pounds; 5-year warranty on electrical components
Includes manual
Durable cast iron
5 cfm at 100 psi; quiet 74 dB; 2-cylinder in-line design
13-1/2 amp, 2-horsepower, 4-gallon, oil-free twin hot dog compressor

found in T-2820ST's description: From the Manufacturer
At (74-decibels) the Thomas T-2820ST is the quietest 2 HP contractor grade compressor on the market. Delivering 5 cfm at 100 psi it is also the highest output 2 HP compressor available. Often called "The Cadillac of Portables" it sets the standard on what 2 HP compressors should be. Uses include, multiple nail gun operation, drywall texture spraying, HVLP systems, pneumatic impact wrenches, paint spraying, sandblasting, tire inflating, and more.
found in T-2820ST's reviews:
This is a keeper! - this is a great compressor. I've used it for air guns, various types of light and heavy duty nail guns, and shop tools. Very quiet compared to other compressors of the same size, but compressors will never be mistaken for a 'silent' partner.
18 Gauge Brad Nailer Compressor Combo Kit | Porter-Cable CFBN200A
Porter-Cable CFBN200A
$423.00 >> $175.00
by Porter-Cable

1 year limited warranty
Complete kit with quick-connects, 25' 150 psi air hose, thread sealing tape, nailer case, and wrenches
Oil-free compressor produces 3.7 scfm at 40 psi and 2.7 scfm at 90 psi
Nailer features cushion grip, depth of drive, quick-release nosepiece, and directional exhaust
Professional nailer shoots 3/4" to 2" 18 gauge brad nails

found in CFBN200A's description: Here they've packaged their hard-working 18-gauge brad nailer with its power source--a 15 amp, 120-volt, 6-gallon compressor driven by a 2-horsepower oil-free motor. Fill up the nailer with standard 18-gauge brads from 3/4 inch to 2 inches long, hook up, and you're ready to install baseboards, chair rails, moldings, even make quick work of those wooden craft items like country shelves and vegetable bins. There's a handy depth adjustment for setting the drive depth of the nail and a directional exhaust port. The kit comes with quick connects, 25 feet of 150 psi air hose and thread sealing tape.
found in CFBN200A's reviews:
Great Deal on a Heavy duty compressor and nail gun -
18 Gauge Brad Nailer 2 Horsepower Compressor Combo Kit | DeWalt Heavy Duty D55151BN
DeWalt D55151BN
$422.00 >> $249.99
by DeWalt

Heavy Duty Electric 4 Gallon Twin Stack Air Compressor, High performance direct drive oil lubricated pump, 3.2 cfm @ 100 PSI, 120V,

found in D55151BN's description: From the Manufacturer
This first-ever DeWalt 2 Brad Nailer/Compressor Combo Kit (D55151BN) simplifies the purchasing process a providing a cost effective tool package that delivers maximum power and versatility on the jobsite. The D55151BN includes an 18-gauge heavy-duty pneumatic brad nailer (D51238K), a 2.1 HP Continuous) 4 gallon oil lube side stack compressor (D55151), a 25 ft. vinyl air hose, fittings and pipe joint tape. The D51238K 18-gauge heavy-duty pneumatic brad nailer is equipped with many innovative features that help the user save time and money on the jobsite. The tool holds 110 nails from 5/8 to 2 long and can be used with precision on both hard and soft woods. In softer materials, nail depth can be adjusted quickly and locked in with an innovative vertical slide that has an adjustable four-index position. A tool-free, 360 degree adjustable exhaust setting helps to channel air exhaust away from the user, creating a safe and comfortable working environment. The D55151 electric compressor is equipped with a 1. The compressor is designed with a durable cast iron cylinder, providing increased pump life. Designed to be sturdy yet lightweight, the compressor weighs only 53.
15 Amp 1 Horsepower 3 Gallon Oil-Free Pancake Compressor | Thomas T-100SP
Thomas Compressors T-100SP
$469.00
by Thomas Compressors

All-steel/aluminum construction (no plastic shrouds) for optimal durability
Life-Guard Dirt Deflector for cleaner, cooler operations
Quiet-running (75 decibels) for reduced operator fatigue
3.1 cfm @ 100 psi output for supporting up to two nailers simultaneously
1,700 rpm motor keeps up with the fastest nailers

found in T-100SP's description: From the Manufacturer
Designed for continuous, multiple-gun operation, the Thomas Model T-100SP Renegade is a high output, 1-horsepower compressor tough enough for a wide variety of applications.1 cfm at 100 psi, this three-gallon pancake tank compressor supports one to two nail guns simultaneously. High overall tank pressure (135 psi) supports longer hose runs, which means greater air-storage capacity, too. The patented "Life Guard Dirt Deflector" extends compressor life by eliminating dirt and improving cylinder cooling. A slow-turning (1700 rpm) motor reduces noise level and extends compressor life.

FEATURES

  • Only 75 decibels for less operator fatigue
  • Higher CFM Delivery - 135 psi
  • Designed to Run on 15 Amp Circuits
  • Designed to Run on Extension Cords
  • All Steel/Aluminum Construction (No Plastic Shrouds)
  • Built for Contractors in Sheboygan, Wisconsin
  • Rated for Continuous Use (100% Duty Cycle)
  • Ball Bearing Construction Throughout
  • Will Start and Run in Cold Weather
  • Extremely Well Balanced (no walking)
  • Run at Any Angle (will not run tight)
  • Fast, Easy, Low Cost Rebuilds
  • No Maintenance Costs or Downtime
  • No Oil to Add, Change or Spill
  • Life - Guard Dirt Deflector Extends Life

SPECIFICATIONS

  • Air Displacement 6.0 CFM
  • Air Delivery 3.1 CFM @100 PSI
  • Max pressure to 135 PSI
  • Pressure Switch Starts compressor @ 110 PSI
  • Stops compressor @ 135 PSI
  • Motor 1 HP electric motor
  • Capacitor Start
  • Tanks Capacity 3 gallons
  • Shipping Weight 57 lbs.4
  • Low Amp Draw 13
  • Recovery Time 18 seconds
  • Regulator & Gauge Supplied
  • RPMs 1725
  • Decibel Rating 75 dB
  • Finish Guns 3-4
  • Framing Guns 1-2
  • Roofing Guns 1-2

.

- Dual Action Finish Tool & Compressor Combo Kit | CPACK270
Bostitch CPACK270
$N/A
by Bostitch

All required fittings & thread sealant tape
3/8" x 25' heavy duty airline with MPT fittings
CAP1516 - Trim Air 1.5 Peak HP oil-free contractor compressor
SB-2in1 combination brad nailer/finish stapler
SB-1664FN 16-gauge, 2-1/2" finish nailer

found in CPACK270's description: Product Description
Bostitch SB-1664FN 16-Gauge Straight Finish Nailer This Bostitch finish nailer drives 1- to 2-1/2-inch, 16-gauge finish nails and weighs only 4. Nail heads are visible throughout the entire length of the enclosed top-load magazine, allowing for easy viewing of the remaining fasteners. The nailer has a quick-release nose for easy jam clearing. Features & Benefits: Aluminum housing for job site durability Quick release nose door for fast jam clearing Adjustable depth control for quick countersinking adjustments Rubber grip for comfort Adjustable deflector conveniently directs exhaust No-mar tip protects work surface Includes carrying case Bostitch SB-2IN1 Brad Nailer / Finish Stapler Combo Tool The ultimate Tool for the craftsman and home hobby shop! The most asked for tool is finally available. Features & Benefits: Drives both brads and finish staples Adjustable depth control for quick countersinking adjustments Tool-free adjustable deflector conveniently directs exhaust Rubber grip for comfort Aluminum housing Includes carrying case CAP1516 - Trim Air 1.5 Peak HP oil-free contractor compressor Features and Benefits 1.
Finish Nailer, Brad Nailer, Narrow Crown Stapler and Co | Factory-Reconditioned Porter Cable CFFN251TR
Porter Cable CFFN251TR
$329.00
by Porter Cable

49 pounds; 1-year warranty
Includes 2 nailers, stapler, compressor, air hose with coupler and plug, oil, manuals
Rugged plastic housings on tools; cast-iron compressor
Includes FN250B finish nailer, BN125A brad nailer, NS100A stapler, and 6-gallon pancake compressor
Factory-reconditioned nailer, stapler, and compressor combo kit

found in CFFN251TR's description: com Product Review
Ideal for onsite trim work, architectural woodwork, and casework installation, this combo kit from Porter-Cable includes a finish nailer, brad nailer, narrow crown stapler and compressor.

First, the compressor: The unit blasts out an impressive 150 maximum psi for driving more nails than traditional 135 psi compressors. A 6-gallon tank lets you drive large quantities of nails on a single tank charge. Running on standard household current, this 120-volt electric compressor also cranks out 2.6 standard cubic feet per minute at 90 psi for quick compressor recovery time and faster nailing. Weighing just 34 pounds, the compressor is easy to transport from project to project. And, two quick-connect couplers let the compressor power two nail guns to at the same time.

Now for the guns: The kit’s BN125A nailer uses standard 18-gauge brads from 5/8- to 1-1/4 inches long. And, the included FN250B nailer uses standard 16-gauge finish nails from 3/4 to 2-1/2 inches long. Nailers are equipped with special hardened driver blades for maximum durability and reliability. The finish nailer also features an adjustable depth-of-drive and a non-marring nose tip. Olson

What’s in the Box
6-gallon, 150 psi compressor with two couplers; 1-1/4-inch, 18-gauge brad nailer; 2-1/2-inch, 16-gauge finish nailer; 25-foot air hose with coupler and plug; 2,000 fasteners, nailer oil, canvas carry bag.

16 Gauge Finish Nailer 18 Gauge Brad Nailer Compressor | Factory-Reconditioned Porter-Cable CFFN250NR
Porter-Cable CFFN250NR
$540.00
by Porter-Cable

52 pounds; 1-year warranty
Includes brad nailer, finish nailer, compressor, vinyl air hose, pipe joint tape
Heavy-duty steel construction
Comes with 16-gauge finish nailer, 18-gauge brad nailer, and 6-gallon, 10 amp, oil-free pancake compressor
Factory-reconditioned finish nailer and compressor combo kit

found in CFFN250NR's description: You can finish any woodworking project with this limited edition kit that includes both a finish nailer, brad nailer, and compressor. Ideal for on-site trim work, architectural woodwork, and casework installation, this finish nailer and compressor kit from Porter-Cable is perfect for the finish trim installer. Uses standard 16-gauge brad nails from 3/4 to 2-1/2 inches. Includes: 1 Porter-Cable 16 gauge, 3/4"�2-1/2" finish nailer kit (FN250B), 1 Porter-Cable 18 gauge, 5/8" �1-1/4" braid nailer kit (BN125A), 1 135 psi, 2hp, 6 gallon pancake style compressor, 1 300 psi, 25' vinyl air hose, 1 air hose fitting, 1/4" male plus coupler, Pipe joint tape.
found in CFFN250NR's reviews:
Which one is new and which is reconditioned? - I've kept an eye out for a deal on a nail gun kit so when i saw the reconditioned units I thought I would give it a shot.
4 Horsepower 4 Gallon Oiled Twin Hot Dog Gas Compressor | Thomas TG-400HST
Thomas Compressors TG-400HST
$999.00
by Thomas Compressors

Fuel Capacity .66 Gal.
Engine Honda GX120 4 HP OHV Gas
Pressure Switch Continuous run unloader valve with idle down - Unloads @135 PSI, Loads @ 115 PSI
Air Delivery 5.4 CFM @ 100 PSI
Air Displacement 12.4 CFM

found in TG-400HST's description:

Longer Life - With the patented LifeGuard™ dirt deflector that keeps job site dust and grit out of the compressor, the new Renegade® will perform year after year

Engine - Cast iron cylinder sleeve extends life of engine

Perma-lube oil-less design for maintenance-free operation and quick cold weather starts

Designed for Maintenance-free operation with no belts, belt guards or pulleys, which also means less vulnerability to job site damage

High performance overhead valve design for added power and high efficiency

.
found in TG-400HST's reviews:
Air Cube 1 - This compressor is a contractor's dream. It can easily power up to three nail* (see note below) guns simultaneously with the 5.4 CFM @ 100 PSI air delivery. The unit portability allows using tools like nail guns, impact wrenches, ratchets, sanders, drills, cutters and spray-painting in remote locations. This 1-1/2 foot cube gas compressor fits in the trunk of a midsize vehicle. This is the only gas power compressor that I have worked with that a single average size person can move (alone). The engine optimizes fuel efficiency by automatically slowing to an ideal speed when the air tanks are full.

The engine, even while operating faster to fill the air tanks, is relatively quiet allowing a normal conversation a few feet away. It is quieter than the pancake compressors I have used.

Each air tank has a separate moisture drain valve to keep the tanks from rusting on the inside.

* The air regulator comes with two 1/4" female NPT thread connections. Since I could not remove the stripped hex plug, I used the air gage connection to add a tee.

Nail Gun Air Compressor - 1   2   3   4

Porter-Cable (27)
Campbell Hausfeld (18)
DeWalt (14)
Emglo (10)
Bostitch (9)
Thomas Compressors (9)
Makita (6)
Hitachi (5)
Porter Cable (4)
Grip Rite (3)
Palmgren (2)
GRIP-RITE (2)
Senco (1)
Xantrex Technologies (1)
Black & Decker (1)
Ingersoll Rand (1)
Wagan (1)
Stanley Hand Tools (1)
AccuSet (1)
Q Industries (1)

Other Searches:

Air Compressor Gun Nail
Nail Gun Air Compressor
Air Compressor Gun Nail Review
Air Combo Compressor Gun Nail
Air Compressor Nail Gun Combo
©2006