1-year warranty on nailer; 90-day warranty on compressor Includes nailer, 1/4-inch -by-25-foot hose, safety glasses, fittings, oil, 1,200 brad nails, wrenches, and manuals Compressor: 1 horsepower, 2-1/2 gallons; aluminum cylinder with steel sleeve; 20 pounds Nailer: adjustable depth of drive, rear exhaust, easy-open latch, no-mar pad, low-load indicator 18-gauge brad nailer and 1-gallon compressor combo kit
found in PC0947's description:
FinishPro 18 FEATURES
Extra power — Drives fasteners up to 2" in hard wood applications
Belt hook — For convenience
Adjustable depth-of-drive
Rear exhaust — Keeps oil and dust away from work surface
Easy-open latch — For quick and comfortable loading
Hardened steel driver — For extended life
Full soft grip — For comfort and control
Low load indicator — Visible fastener indication
No-mar pad — To protect work materials
One-year warranty
Includes case, fitting, oil, hex wrench and fastener rebate
Projects Baseboard,cabinets, casebacks, chair rail, finish and trim, furniture frames, furniture trim, mirror and picture frames, trim
FinishPro 18 SPECIFICATIONS
Power (in/lbs): 168
Height: 9.3 bar)
Mode of Operation: Restrictive Trigger
Fastener Types
Gauge: 18
Fastener Range: 5/8"—2"
Finish: Galvanized
What's in the Box This kit comes complete with the FinishPro 18 brad nailer, a Senco 1/2 hp (1 hp peak), 1-gallon compressor, 1/4-by-25-foot coil hose, safety glasses, fittings, tool oil, variety pack of 1,200 brad nails, tool wrenches and manuals.
Product Description
Finish Pro 18 Combo Kit, Perfect For Woodworkers & Punch List Contractor, Kit Includes, Lightweight Oilless, 1HP Compressor, Finish Pro 18 Brad Nailer 5/8" To 2", Hose, Fittings, Sample Pack Of Brads, Safety Glasses & Bottle Of Oil.
found in PC0947's reviews: I'm impressed. - I upgraded to this from a cheap little electric brad nailer that could not sink a 1" brad. The compressor is small & quiet and has absolutely no problem keeping up with the nailer. I own an old 5 horse 220 v compressor but wanted something to use inside the house without running hundreds of feet of hose from the garage.
32 pounds; 1-year warranty Includes compressor, ASME safety valve, regulator, gauges, 1/4-inch quick coupler, manual Cast-iron construction Provides 3.7 cfm at 40 psi and 2.6 cfm at 90 psi; air-regulator and quick-connect coupler 15 amp, 2-horsepower, 6-gallon oil-free pancake compressor; handle; built-in thermal overload protector
found in CPFAC2600P's description: com Review
This Porter-Cable 2-horsepower, 6-gallon pancake compressor transports easily but has plenty of capacity and power--enough to support heavy use of brad and finish nailers and moderate use of framing nailers. Features include a high-flow regulator, an easy-to-read air pressure gauge, automatic thermal overload protection, an industrial-style quick-connect body in the air outlet, and a long-life motor with replaceable brushes. The compressor weighs 32 pounds and has a handle built into the motor housing, so it's relatively portable. This Porter-Cable is as convenient and easy to use as any compressor out there, and it's just about ideal for brad and finish nailers that are being used inside people's homes on a regular basis. --Jonathon Tudor
From the Manufacturer
This oil-free 2-hp pancake-style aircompressor has a new high pressure design that provides 28-percent more usable air! This allows more run time and less down time. The high-flow regulator keeps the tank pressure between 120 PSI and 150 PSI, allowing a greater reserve air capacity. Lightweight for portability, this compressor has plenty of power to fire all brad and finishing nailers as well as moderate usage of roofing and framing nailers. Includes compressor, high flow air regulator and gauges, quick coupler, and instruction manual.8 HP Running
Built-in automatic thermal overload protection
Larger Easy to read regulated air pressure gauge
Universal, High-FloSM, push-to-connect coupler in air outlet
One year warranty
150 PSI - 10 gallon equivalent tank size as compared to conventional 125 PSI model
87 Dba
Oil-free pump design for durability and no maintenance
Long-life motor with replaceable brushes
High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
6 gallon tank supports heavy usage of stapler, brad and finish nailer, standard-to-heavy roofing and standard framing nailer
120 Volt, universal motor starts easily under low voltage conditions
Extension cord use without tripping circuit breakers
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual
SPECIFICATIONS
Lubrication: Oil Free
Gauges: 2
Quick Couple: 1/4" NPT
Weight (Lbs. PSI: 150
SCFM Air Delivery @40 PSI: 3.7
SCFM Air Delivery @90 PSI: 2.
Product Description
2 HP, 6 Gallon, Oil-Free Pancake AirCompressor, 150 PSI Maximum Tank Pressure, 3.6 SCFM @ 90 PSI 87 DBA, 15 AMPS, Built-In Thermal Over Load Protection, Hi-Flo Air Regulator With Quick-Connect Coupler, Regulated Pressure Gauges, Includes ASME Safety Valve, 1 Year Warranty.
found in CPFAC2600P's reviews: Once pneumatic, you never go back - The Porter-Cable 2HP 6-gallon pancake compressor is a reasonably powerful and reasonably portable aircompressor. I only recently purchased one but I am already sold on pneumatic tools, which the PC 6-gallon compressor operates surprisingly well. Although many pneumatic tools, such as air hammers, drills, and sanders, consume quite a bit of air (generally in the neighborhood of 5 CFM at 90 PSI), I have found that my PC compressor does just fine with its modest 2. My one complaint is that the motor and compressor are a bit louder than I expected. Then again, the noise of the compressor is hardly noticeable above the din of an air hammer, so I'm not sure it really matters.
If you enjoy using power tools and you have not yet experienced the pleasures of pneumatic gizmos, you should consider purchasing a small but serious compressor like the PC 2HP 6-gallon pancake. It's truly amazing how versatile compressed air is; basically any tool that runs on electricity also comes in a pneumatic version (well, except for arc welders). And, in my admittedly novice opinion, the pneumatic versions have many advantages; they are more durable (with surprisingly few moving parts), often cheaper, and usually more powerful than their electric counterparts.
But be warned! If you take the plunge into pneumatic tools, there is an endless stream of items you will find yourself purchasing: air tool lubricants and cleaning kits, in-line oilers, air hoses and gauges, quick connectors, air filters, oil-water separators, Teflon tape, universal air hose joints, air manifolds, blowguns with assorted nozzles, etc.)
One odd thing I've noticed is that the PC 6-gallon compressor is virtually identical to the Craftsman 6-gallon compressor, right down to the paint job.
Protected components for maximum durability Oil lubricated pump allows for long life Low oil shut off provides greater engine protection Automatic idle control for reduced fuel consumption 4 HP Honda GX gas engine provides proven reliability and durability
found in D55250's description:Product Description
4 HP, 4 Gallon, Gas Twin Stack Compressor, High Volume Air Output 4.5 CFM @ 100 PSI, Portable Air Power Honda 4 HP Gas, Automatic Throttle Idle Control, Direct Drive Pump For Improved Portability, Oil Lubricated Improved Compressor Life.
found in D55250's reviews: Incredible cfm for weight! - I bought this compressor for use in heavy commercial construction. It is more portable than the wheelbarrow compressors and can be put in the back of a pickup truck (unit is no feather weight though --- about 70 lbs!) This compressor has the best of all features--- reliable Honda engine, reliable Emglo compressor, overbuilt protective frame and quality gauges and quick connects make this an outstanding compressor. In commercial work, there are usually several trades on site (electrician, plumber, HVAC) and all of these guys are using the same power source. Most compressors capable of running two frame nailers draw enough power that it will constantly trip the the breaker on a temporary service pole unless run on 240 volts. With the gasoline compressor, all you have to do is make sure it has fuel and start it up! No extension cords and no more tripped breakers! We have used this compressor to run two paslode frame nailers shooting down 5/8" plywood nailed every 3" around the perimeter (120 mph rating) and this little guy could amazingly keep up! The compressor isn't louder than the DeWalt electric counterpart when running and the Honda engine means it will run for many years to come. Go buy a lighter,less expensive compressor for the finish guns. This machine is meant to turn out a much more substantial amount of air!
The only downside to this compressor is the price and its weight. That is a lot of money to shell over for a machine that does nothing more than compress air! But, then again, would you really be reading this if all you needed was an average duty Lowe's variety compressor? And if you have a pickup, leave the unit in the back and let it run. compressor up. It seems like they could have trimmed a few more pounds off the compressor and a few more dollars!
If you have any questions, e-mail me (Azul005@aol.
5-year limited warranty Provides 5.6 scfm at 40 psi and 5.1 scfm at 90 psi High-flow regulator for more efficient operation of pneumatic tools Tank pressure is maintained between 145 and 175 psi for more usable air High-pressure technology provides the equivalent of a 60-gallon air supply
found in CPFC2TV3525VP's description:From the Manufacturer
This 25-gallon vertical aircompressor is a real performer with a high-pressure design that allows more usable air to be stored in the tank. It's like being able to fit 60-gallons of air in a 25-gallon tank, giving you a longer time between refills, you'll get more done. A higher flow regulator starts the pump at 145 psi and stops it at 175 psi for more pressure and airflow. Includes compressor with high-flow, high-pressure regulator and gauge, 1/4-inch quick coupler, and operator's manual.6 HP Running
175 PSI - 60 gallon equivalent tank size as compared to conventional 125 PSI model
82 Dba
High-FloSM air regulator (145 PSI start and 175 PSI stop pressure switch) and High-FloSM quick connect coupler
Provides the highest level of moderate-to-heavy duty, tool operation in its class
Direct-drive, twin cylinder, oil free design for duability and no maintenance
120 Volt high-torque, capacitor start induction motor for reliable starting
Longer life and quieter operation with "4 Pole" 1725 RPM motor
Large air regulated pressure gauge for easy visibility and better accuracy
Cushioned handle for comfortable grip
Shroud with integrated air intake filter improves cooling and reduces noise
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual
SPECIFICATIONS
Lubrication: Oil Free
Tank Size Gal. PSI: 175
SCFM Air Delivery @40 PSI: 5.6
SCFM Air Delivery @90 PSI: 5.
Product Description
25-gallon tank, 15 amps @ 115 volts, 175 PSI, SCFM Air Delivery 5.1 @ 90 PSI, Pressure release, Regulator, 2 gauges, Standard equipment: Compressor, ASME safety valve, air regulator and gauges.
found in CPFC2TV3525VP's reviews: Quiet, portable and powerful - I shopped around for weeks before I decided on this compressor. I wanted a compressor for home that I could run an impact on or a DA sander but I also wanted something portable that I could run a nailer on. I had planned to buy two compressors but this compressor will do both. This compressor is surprisingly quiet and is quite powerful. The two stage allows it to provide the power of a compressor twice it's capacity and uses twice the horsepower.) So if you're buying one for home or stationary use that will be run a lot, look at buying a 2-stage 240 volt compressor, it will save you money when the electric bill comes. Recovery time is what you should look for and don't expect any compressor to keep quiet for long when you're running a continuous tool like a sander. Something to consider if you're serious about buying this compressor is look at the CPFC2TV3520WK, it's the same compressor with a 20 gallon horizontal tank but it has a four port remote regulator which might be of use or interest to you. I'll post again in the future once I've used the compressor more and know it a little better. I would recommend renting a compressor or borrowing one from someone who has it prior to making your decision if you haven't used them enough to know what you want from one.
Three year limited warranty Cast-iron cylinder and stainless steel valves for cooler operation
Patent pending oil-lube system with ball bearing design
Direct drive, no belts or adjustments are necessary
2.5 horse power, 4-gallon oil-lube compressor
found in CPLDC2540P's reviews: Very nice unit - Very happy with this aircompressor. Have plugged into 300 feet of electric cord and no problem with curcuit breakers.
Built-in emergency light for illumination at home or on the road Vehicle jumper cables 250 psi aircompressor for inflating tires and sports equipment Operates 115-volt AC or 12-volt DC products anywhere Provides up to 300 watts of AC power
found in 852-1840's reviews: Not what I expexted. - I used the light once, but where my disappointment lies is that I thought it would run my electric boat motor. pleasant surprise - I've used gas powered hedge shears over the years but the cut was cleaner with an electric hedge trimmer.
1-year warranty on nailer; 90-day warranty on compressor
