60 pounds; 1-year warranty Includes DEWALT synthetic compressor oil and pressure regulator Cylinder constructed of cast iron 4.1 cfm delivered at 90 psi; shut-off valve at line and auto reset 14-1/2 amp 2-horsepower 4-gallon oiled twin hot dog compressor with carrying handle
found in EC12's description: com
Hitachi’s 2-horsepower compressor is one of the hardest-working units on the market.1 cfm of free air at 90 psi--enough to easily run two tools at once. Because of its compact size and trim weight, it’s the perfect compressorfor the home do-it-yourselfer, but taking into account its power and portability, contractors will love it, too. Minimum maintenance keeps this baby humming for years--all it wants is lubrication. Hitachi’s known for workhorse tools, and this one is a prime example.--Kris Jensen-Van Heste
From the Manufacturer
This Hitachi aircompressor is powered by a 2 hp, 115-volt direct-drive motor and oil lube pump at 3,450 rpm. It features vertically stacked twin tanks (each with a 2-gallon capacity), line regulator, shutoff valve at line, auto reset, capacitor start, run class F motor, and pressure switch set at 125 psi kick-off, 100 psi kick-on.1 cfm of free air, at 90 psi.
From the Manufacturer
The Hitachi EC12 aircompressor is powered by a 2-horsepower, 115-volt direct-drive motor and oil lube pump at 3,450 rpm. It features vertically stacked twin tanks (each with a 2-gallon capacity), line regulator, shutoff valve at line, auto reset, capacitor start, run-class F motor, and pressure switch set at 125 psi kick-off and 100 psi kick-on. It delivers 4 cubic feet per minute of free air at 90 psi.3-gallon capacity
Comes standard with line regulator and gauges
O-ring on draincock makes valve easy to open and close
Pressure switch has start/stop control at 100 and 125 psi with 14-second recovery time
15 amp motor runs at 3,450 rpm, providing 8.2 cubic feet per minute of free air
Specifications
Horsepower: 2
Amps: 15
Speed: 3,450 rpm
Air displacement: 8. come with a warranty that guarantees freedom from defects in materials and workmanship for a period of one year from the original purchase date. Oil lube single piston compressor type, line regulator with gauge, direct drive electric motor, suction cup feet for extra stability, O-ring on draincock makes valve easy to open and close and resists stripping, vertically stacked twin tanks.
found in EC12's reviews: Disappointing - Had this unit for about three years with very light use - occasional tire inflation. As a previous writer indicated, the gauges got stuck, the pressure release valve froze, it wouldn't start and turned out to be uneconomical to repair. A real turd - I bought one two years ago, and I'd driven less than 250 nails with it before it failed to work properly, so that's about a buck per nail - a great value. It now pumps up, and doesn't stop until the pressure safety valve blows, then the motor goes into some kind of cardiac arrest. Now I'm sure I'll be raped at the repair center as I spend >$100 to repair this $200 turd. Happy, but could be happier - I was given a high recommendation for Hitachi power tools by a construction veteran, so I purchased one. The compressor is still fairly new and seems to provide excellent power for framing guns, finishing nailers, and hoppers. However, I am not incredibly impressed with this compressors ability to start. I realize during the cold winter mornings (not too cold in the San Francisco bay area), that some compressors require an empty tank to kick over, but this is getting a little ridiculous. On a 45 degree morning I don't even try to kick over the tank before making sure it is decompressed completely, and during the middle of the day I still have to, on a not-so-rare occasion, pull the pressure release valve. I have seen on another review that a Smart Start inlet filter can be purchased to cure this problem, but it's annoying that you need to buy new parts to cure problems on a new compressor.
I guess having only one complaint for a power tool isn't too bad, but I'm sure there's a better compressor out there.
Ball valve drain allows for quick and thorough tank draining Dual voltage feature allows easy switching from 120 to 240 volts Dual control feature allows start/stop or constant run option Twin cylinder, cast iron, oil lubricated pump 8.4 cfm delivered at 100 psi with 17-gallon tank
found in D55585's description:From the Manufacturer
You will never run short of air again with this 2-horsepower electric wheeled compressor supported by an ASME-coded 17-gallon OSHA-recognized tank.4 cubic feet per minute at 100 psi for quick recovery. The DeWalt D55585 features dual control for either stop/start or constant run operation. The user can quickly and completely drain the compressor by the ball valve drain, which won't clog like other models that use needle valves. The D55585 includes DeWalt's synthetic compressor oil and a 3/8-inch NPT pressure regulator.4 cubic feet per minute delivered at 100 psi, enables speedy recovery
Twin-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability
2-horsepower motor provides increased performance
Dual wheels make maneuvering easier on the worksite
Dual control feature allows start/stop or constant run operation
Dual voltage feature allows easy switching from 120- to 240-volt operation
ASME-coded 17-gallon OSHA-recognized tank
Ball valve drain allows for quick and thorough tank draining
Specifications
Drive: belt drive
Horsepower: 2 hp
Tank size: 17 gallons
Power supply: 2-pole induction motor
Cubic feet per minute at 100 psi: 8.
Includes
DeWalt synthetic compressor oil
3/8-inch NPT pressure regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.
Low profile design and pneumatic tire for mobility Automatic idle control for reduced fuel consumption Ball drain valve allows for quick and thorough tank draining Twin cylinder, cast iron, oil lubricated pump for durability and reliability 5.5 HP Honda GX gas engine provides proven reliability and durability
found in D55270's description: The 8-gallon wheelbarrow design and pneumatic tire allows for mobility on nearly any job site. The automatic throttle control allows the unit to idle and conserve fuel when air is not required. Other features include a braided steel after-cooler, heavy-duty belt guard, ball-type tank drain valves, and a 3/8-inch regulator with gauges. The D55270 comes complete with the initial fill of DeWalt synthetic aircompressor oil.9 cubic feet per minute delivered at 100 psi for quick recovery
Twin-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability
Low-profile design for easy maneuverability
5.5-horsepower Honda OHV GX gas engine provides proven reliability and durability
Automatic idle control for reduced fuel consumption
Pneumatic tire improves worksite mobility
Ball valve drain allows for quick and thorough tank draining
Specifications
Drive: belt drive
Horsepower: 5.
Includes
DeWalt synthetic compressor oil
3/8-inch NPT pressure regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty
Product Description
5.5 HP, 8 Gallon, Compressor Powered By A Honda GX Gas Engine With Proven Reliability & Durability, 8.9 CFM @ 100 PSI, Automatic Idle Control For Reduced Fuel Consumption, Low Oil Shut Off Provides Greater Engine Protection, Twin Cylinder, Cast Iron, Oil Lubricated Pump With Emglo's 50 Years Of Proven Durability & Reliability, Ball Valve Drain Allows For Quick & Thorough Tank Draining, Low Profile Design For Easy Maneuverability, Pneumatic Tire Improves Worksite Maneuverability, Includes: Dewalt Synthetic Compressor Oil & Pressure Regulator.
ASME coded 17-gallon OSHA recognized tank Automatic idle control for reduced fuel consumption Ball drain valve allows for quick and thorough tank draining Four cylinder, cast iron, oil lubricated pump for durability and reliability 9 HP Honda GX gas engine provides proven reliability and durability
found in D55275's description: The D55275 17-gallon portable unit has two wheels for more stable mobility. It's powered by an 8-horsepower Honda engine with automatic throttle control to conserve fuel when air is not being used. The cast-iron four-cylinder pump is designed and built for longevity. Compressor includes a 3/8-inch regulator and the initial fill of DeWalt synthetic aircompressor oil.2 cubic feet per minute delivered at 100 psi for high-volume usage
Quad-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability
Dual wheels make maneuvering easier on the worksite
8-horsepower Honda OHV GX gas engine provides proven reliability and durability
Automatic idle control for reduced fuel consumption
ASME-coded 17-gallon OSHA-recognized tank
Ball valve drain allows for quick and thorough tank draining
Specifications
Drive: belt drive
Horsepower: 8 hp
Tank size: 17 gallons
Power supply: Honda gas OHV GX engine
Cubic feet per minute at 100 psi: 16.
Includes
DeWalt synthetic compressor oil
3/8-inch NPT pressure regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.
Low oil shut off provides greater engine protection 8 HP Honda OHV GX gas engine provides proven reliability and durability Low profile design for easy maneuverability Quad cylinder, cast iron, oil lubricated pump 16.2 cfm delivered @ 100 psi for high volume applications
found in D55271's description: 2 cubic feet per minute @ 100 psi, while the low-profile design of the compressor means less operator fatigue and maximum job site maneuverability. Features include a beefed-up, totally enclosed steel belt guard, pneumatic tire, brass valves and fittings, stainless-steel braided after-cool tube, ball valve drain, and constant run control so the engine runs idle when not under load. The compressor includes a 3/8-inch regulator and an initial fill of DeWalt synthetic aircompressor oil.2 cubic feet per minute delivered at 100 psi for high-volume applications
Quad-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability
Low-profile design for easy maneuverability
8-horsepower Honda OHV GX gas engine provides proven reliability and durability
Automatic idle control for reduced fuel consumption
Pneumatic tire improves worksite mobility
Ball valve drain allows for quick and thorough tank draining
Specifications
Drive: belt drive
Horsepower: 8 hp
Tank size: 8 gallons
Power supply: Honda gas OHV GX engine
Cubic feet per minute at 100 psi: 16.
Includes
DeWalt synthetic compressor oil
3/8-inch NPT pressure regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.
110 pounds; 1-year warranty Includes compressor, ASME safety valve, air regulator, gauges, 1/4-inch coupler, manual Cast-iron construction Max 135 psi; 8 cfm at 40 psi, 5.7 cfm at 90 psi; 90 dB 15 amp, 4-1/2-horsepower, 15-gallon oil-free wheeled single hot dog compressor with handle
found in CPF4515's description:From the Manufacturer
A real performer, this 15-gallon aircompressor allows more usable air to be stored in the tank. The high-pressure design allows for longer run time between refills - it's like being able to fit 19 gallons of air in a 15-gallon tank - so you'll get more done. A higher flow regulator starts the pump at 110 psi and stops it at 135 psi for more pressure and airflow. The oil-free design eliminates maintenance and the possibility of oil overspray for trouble-free use, and also allows operation on slopes and angles without spillage. A cushioned grip and large wheels provide maneuverability with ease and comfort. This compressor is excellent for home shop use and moderate construction usage. Your purchase includes compressor with high-flow, high-pressure regulator and gauge, 1/4-inch quick coupler, and operator's manual.8 HP Running
135 PSI - 19 gallon equivalent tank size as compared to conventional 125 PSI model
90 Dba
120 Volt capacitor start induction motor
High-FloSM air regulator and High-FloSM quick connect coupler for more work at higher pressure (110 PSI start and 135 PSI stop pressure switch)
Cushioned handle for comfortable grip
Large air regulated pressure gauge for easy visibility
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual
SPECIFICATIONS
Lubrication: Oil Free
Gauges: 2
Quick Couple: 1/4" NPT
Weight (Lbs. PSI: 135
SCFM Air Delivery @40 PSI: 8.0
SCFM Air Delivery @90 PSI: 5.5 HP, 15 Gallon, Oil-Free Horizontal AirCompressor, 135 PSI Maximum Tank Pressure, 8 SCFM @ 40 PSI & 7 SCFM @ 90 PSI, 90 DBA, 15 AMP Capacitor Start Induction Motor, Hi-Flo Air Regulator With Quick-Connect Coupler, Regulated Pressure Gauges, Includes Cushioned Handle & Wheel Kit, ASME Safety Value, l Year Warranty.
5-year limited warranty Provides 5.6 scfm at 40 psi and 5.1 scfm at 90 psi High-flow regulator for more efficient operation of pneumatic tools Tank pressure is maintained between 145 and 175 psi for more usable air High-pressure technology provides the equivalent of a 60-gallon air supply
found in CPFC2TV3525VP's description:From the Manufacturer
This 25-gallon vertical aircompressor is a real performer with a high-pressure design that allows more usable air to be stored in the tank. It's like being able to fit 60-gallons of air in a 25-gallon tank, giving you a longer time between refills, you'll get more done. A higher flow regulator starts the pump at 145 psi and stops it at 175 psi for more pressure and airflow. Includes compressor with high-flow, high-pressure regulator and gauge, 1/4-inch quick coupler, and operator's manual.6 HP Running
175 PSI - 60 gallon equivalent tank size as compared to conventional 125 PSI model
82 Dba
High-FloSM air regulator (145 PSI start and 175 PSI stop pressure switch) and High-FloSM quick connect coupler
Provides the highest level of moderate-to-heavy duty, tool operation in its class
Direct-drive, twin cylinder, oil free design for duability and no maintenance
120 Volt high-torque, capacitor start induction motor for reliable starting
Longer life and quieter operation with "4 Pole" 1725 RPM motor
Large air regulated pressure gauge for easy visibility and better accuracy
Cushioned handle for comfortable grip
Shroud with integrated air intake filter improves cooling and reduces noise
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual
SPECIFICATIONS
Lubrication: Oil Free
Tank Size Gal. PSI: 175
SCFM Air Delivery @40 PSI: 5.6
SCFM Air Delivery @90 PSI: 5.
Product Description
25-gallon tank, 15 amps @ 115 volts, 175 PSI, SCFM Air Delivery 5.1 @ 90 PSI, Pressure release, Regulator, 2 gauges, Standard equipment: Compressor, ASME safety valve, air regulator and gauges.
found in CPFC2TV3525VP's reviews: great choice for general purpose home use - The two-stage compressor means that it is quieter than a single-stage unit, and should mean better reliability as well.
I've used some fairly demanding air tools with it, such as air drills and die grinders. The motor comes on early and stays on under continuous air drill usage, but it manages to keep up.
The only thing I don't like about it is the process for depressurizing the tank. You have to pull open the spring-loaded safety valve. Also, since the spring must be set for 175 psi, it becomes very hard to keep open as the pressure drops down below 100 psi or so. And the drain valve is hard to open and hard to seal.
The good news is that the drain valve can be removed. I replaced it with some tubing and a manual ball valve. For about $20 of hardware, this is a big improvement. A lot of bang for your buck... - I got this compressorfor Christmas from my dad. We looked at many compressors before purchasing this one. This 2 stage 2-cylinder rig can really put the air out and what surprised me the most is how quiet it is. I am also extremely pleased with the performance that this compressor has. I currently run air impacts, butterfly impacts, air ratchets, air hammers, multiple die grinders, a right angle grinder, engine degreaser and have never come close to taxing the limits. It has plenty of air to spare. I leave the compressor always plugged in so it can recover whenever need. I would say it pretty much just sits in the corner and does its job with no tending to besides an occasional tank draining and filter check. I highly recommend this to anyone doing serious work with a compressor. Not too big or too small - Can run my air ratchet or 1/2' impact quite a long time without turning on. I occasionally will sand and paint but it's not a major use for me (Ihate sanding and painting). A sander (especially a high-speed unit) uses an awful lot of air and under heavy sander use I think this unit would be "strained". Advantages of oiless: Should not be affected by cold conditions, cleaner running, no need for oil separator when spraying, no need to worry about servicing it for oil changes etc. The only thing they did not include and I wish they had, is a quick pressure release for the "hose side". Bottom line if you need a compressor but the smaller 15 to 20 gal types are not enough and a big 60 to 80 gal. is too much check this out you'll be glad you did! It seems to fit right in the middle offering good performance, relative quiet, ease and convenience of use and reasonable portability in a high quality well built unit.
32 pounds; 1-year warranty Includes compressor, ASME safety valve, regulator, gauges, 1/4-inch quick coupler, manual Cast-iron construction Provides 3.7 cfm at 40 psi and 2.6 cfm at 90 psi; air-regulator and quick-connect coupler 15 amp, 2-horsepower, 6-gallon oil-free pancake compressor; handle; built-in thermal overload protector
found in CPFAC2600P's description: com Review
This Porter-Cable 2-horsepower, 6-gallon pancake compressor transports easily but has plenty of capacity and power--enough to support heavy use of brad and finish nailers and moderate use of framing nailers. Features include a high-flow regulator, an easy-to-read air pressure gauge, automatic thermal overload protection, an industrial-style quick-connect body in the air outlet, and a long-life motor with replaceable brushes. The compressor weighs 32 pounds and has a handle built into the motor housing, so it's relatively portable. This Porter-Cable is as convenient and easy to use as any compressor out there, and it's just about ideal for brad and finish nailers that are being used inside people's homes on a regular basis. --Jonathon Tudor
From the Manufacturer
This oil-free 2-hp pancake-style aircompressor has a new high pressure design that provides 28-percent more usable air! This allows more run time and less down time. The high-flow regulator keeps the tank pressure between 120 PSI and 150 PSI, allowing a greater reserve air capacity. The oil-free pump allows for maintenance-free use as well as use on slopes without the risk of oil leakage. Lightweight for portability, this compressor has plenty of power to fire all brad and finishing nailers as well as moderate usage of roofing and framing nailers. Includes compressor, high flow air regulator and gauges, quick coupler, and instruction manual.8 HP Running
Built-in automatic thermal overload protection
Larger Easy to read regulated air pressure gauge
Universal, High-FloSM, push-to-connect coupler in air outlet
One year warranty
150 PSI - 10 gallon equivalent tank size as compared to conventional 125 PSI model
87 Dba
Oil-free pump design for durability and no maintenance
Long-life motor with replaceable brushes
High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
6 gallon tank supports heavy usage of stapler, brad and finish nailer, standard-to-heavy roofing and standard framing nailer
120 Volt, universal motor starts easily under low voltage conditions
Extension cord use without tripping circuit breakers
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual
SPECIFICATIONS
Lubrication: Oil Free
Gauges: 2
Quick Couple: 1/4" NPT
Weight (Lbs. PSI: 150
SCFM Air Delivery @40 PSI: 3.7
SCFM Air Delivery @90 PSI: 2.
Product Description
2 HP, 6 Gallon, Oil-Free Pancake AirCompressor, 150 PSI Maximum Tank Pressure, 3.6 SCFM @ 90 PSI 87 DBA, 15 AMPS, Built-In Thermal Over Load Protection, Hi-Flo Air Regulator With Quick-Connect Coupler, Regulated Pressure Gauges, Includes ASME Safety Valve, 1 Year Warranty.
Honda 5.5 HP GX160 Engine with low oil shut down Automatic idle down control Direct-drive design - no adjustments Lightweight - only 96 lbs. 12 cfm at 100 psi - 8 HP performance, 5.5 HP price
found in TG-550H's description:From the Manufacturer
The TG-550H is the worlds first 2 cylinder direct-drive compressor. The compressor is bolted directly to the engine flange which results in a lightweight, compact machine that out-performs anything in its class.) and with air delivery of 12. The lightweight 7-gallon wheelbarrow style tank makes for great portability and easy loading and unloading. Other features include automatic idle down, ASME safety valve, high flow 17-cfm regulator, and low oil shut down. The compressor never needs adjustment and air delivery remains contant, there is no loss of performance due to belt stretching or slippage.
23 by 23 by 13-1/2 inches; 68-1/2 pounds; 1-year warranty Includes DEWALT synthetic compressor oil and pressure regulator Cylinder constructed of cast iron 4-1/2 cfm delivered at 100 psi; dual soft start valvefor cold-weather starts; oil-lubricated pump 15 amp 2-3/4-horsepower 4-gallon oiled twin hot dog compressor with carrying handle
found in D55155's description: com Review
At just a foot high and less than two feet wide out of the carton, this compressor was quite a bit smaller than we expected, so to be fair, we quickly lowered our expectations. The joke was on us, though, because this little powerhouse just doesn’t quit, and we learned that you can’t judge a compressor by its size. Emglo’s half-century in the compressor business is evident in this model, and with a couple of small exceptions (we’ll get into that in a minute), we don’t think anyone could make a finer piece of air power. To let out any moisture that’s accumulated, it’s just an easy turn of the ball-valve tank drain, then just wrap the cord on its holder and you’re ready to go.
In the performance department, we have to say this machine blew us away, moving 4. Now, this may be a plus or a minus in your book, but we liked the fact that the compressor is factory set to power on at 100 psi an+d shut off at 120 psi, and the cycle time was under 15 seconds.) It has air aplenty for two nailers at once, and with that fast recovery, the job will get done in no time. What you do want to watch out for, though, is the proximity of the reset switch to parts that get searingly hot while in use.
In balance, this is one of the best compressor’s we’ve seen for the size, power, ruggedness and incredible portability it offers. Here’s to a great pairing of two great toolmakers.--Kris Jensen-Van Heste
Product Description
DeWalt's 2-horsepower, 4-gallon compressor features an oil-lubricated design with a cast-iron cylinder to guarantee job site durability. The new roll-cage design and integrated control panel protects the compressor and the controls from accidental damage. Carrying the compressor is easy, too: the flat design lets the user tote the compressor comfortably like a suitcase. The package comes with the initial fill of DeWalt synthetic aircompressor oil.
From the Manufacturer
This 4-gallon hand-carry compressor was designed to meet the tough demands of the job site. The handle is situated to allow the user to carry the compressor with one hand in a natural walking position. The roll cage and integrated instrument panel protect the compressor and instruments from damage. Other features include a ball-type tank drain design and a wrap area for securing the power cord. Comes with the initial fill of DeWalt's synthetic aircompressor oil.5 cubic feet per minute delivered at 100 psi, recovers in less than 15 seconds
New ergonomic design for easy portability
Protected components for maximum durability
Oil-lubricated pump allows for increased life
ASME-coded, 4-gallon, OSHA-recognized tank
Dual soft-start valves assist in cold weather startup
Ball valve drain allows for quick and thorough tank draining
Cast-iron cylinder enhances pump life
CSA approved
Specifications
Drive: direct drive
Horsepower: 2-3/4 max hp
Tank size: 4 single ASME tank gallons
Power supply: 120-volt AC, 15 amps, 60 Hz, 2-pole induction motor
Cubic feet per minute at 100 psi: 4.
Includes
DeWalt synthetic compressor oil
2 universal quick couplers
Regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty
Product Description
2 HP, 4 Gallon, Electric Single Tank Hand Carry Compressor, 4.5 CFM @ 100 PSI, Ball Tank Drain Valve Allows For Quick & Thorough Draining, Oil Lubricated Pump Allows For Increased Life, Cast Iron Cylinder Increases Life Of The Pump, Dual Soft Start Valves Assists In Cold Weather Start Up, Improved Ergonomics Assists In Carrying, Protected Components For Increased Durability, ASME Coded 4 Gallon Tank Is OSHA Recognized, CSA/NRTL Approved, Tool Length: 21.
found in D55155's reviews: Major quality control and service issues - I am a contractor and have had this compressorfor three years. This is the worst compressor I have ever owned. It starts very slowly and pops the breaker about a dozen times before the motor reaches full speed (rpm), then it runs fine until it cools down and the problem starts again. I have had the regulator, cold start valve and checkvalve assembly replaced, but nothing has had any effect. I should have just replaced the compressorfor the headache it's been. This just doesn't seem to be designed for continious use. Great Performance - Dewalt/Emglo designed this compressor around portability. I gave 4 stars because of the awkward accessibility to the tank's drain valve.there is very little room in the opening to not only grasp and turn the valve, but if the valve is opened too quickly, be prepared for full discharge of air. Another design area that could use improvement is the location of the two pegs/studs for stowage of electrical cord in order to move compressor. With cord wrapped around the two pegs, natural movement of compressor is to roll it onto it's side in order to pickup and carry with one hand. When cord is stowed it extends outside the compressor's frame therefore, when compressor is rotated onto it's side the wrapped cord comes into contact with the ground resulting in compressor bearing it's weight on cord. Outside of two design improvements, aircompressor is a great performer. it's too much! - This is a great compressor. however there's the exception of one valve and a reset switch. There's only an inch or so for clearance for the valve and I could only get to it with a screwdriver. certainly too small for the average construction guy with gorilla hands. I've one additional bad thing to say and that is that DeWalt could use some better paint to go with such a great looking compressor! there's already rust on my cylinder housing and I only purchased the unit a week ago! But overall, I would recommend it highly. Paradox - I just pulled the compressor out of the box and was mightly impressed. After going through the pre-check I cranked it up. NOT for everyone !! - Be realistic and really think about your needs in a compressor - because this one is meant for low-volume work. Portable, the heft is managable for most tradesmen. Easily satisfies demand for 1 framing nailer or 2 smaller guns. Controls and drain valve are positioned well and work perfectly.
Cons: Too loud for use in a customer occupied home - OK for garage or outside.
Factory set pressure valve set to kick on compressor at 100psi and turn off at 120psi - which means that any fair amount of use will cause this sucker to go on-off-on-off-on-off almost constantly!
Bottom Line: DO NOT get this if you need a generous supply of air (for blow nozzles, production cabinetry, house framing, paint sprayers, etc.)
Go ahead and get one if you need a portable, professional quality, low-volume air supply (for continuous finish nailing or occasional large gun use)
This would be the perfect tool for a handyman who needs occassional yet reliable air from house to house.
I'd have given it 5 stars - but the factory sealed presets for powering on and off are way to close!. Good machine, but some packaging and assembly issues - To my dissatisfaction, it arrived with a broken air filter and some loose items rolling around in the air tank. No, it wasn't the air filter parts, it was something metalic actually inside the closed tank! Amazon referred me to DeWalt who referred me to my local service center.
Thanks to Amazon's incredibly fast and hassle-free process for returns, I had my replacement compressor less than a week later. Unfortunately, it too had a broken air filter. But since everything else was fine, I bought a filter locally (DeWalt's replacement has yet to arrive) for $10 and kept the compressor. This was not in the first shipment and is REQUIRED before starting the unit which is something that as a first-time compressor buyer, I would not have known to do.
I recommend this machine but please check over your unit carefully when it arrives and call DeWalt's parts center to get a free replacement filter if that's all you find wrong. A pleasure to use - After putting a Porter-Cable pancake unit through its paces for two years, the unit developed an annoying tendancy to run continuously until it was manually shut off. What a nice piece! It is very well constructed, runs smoothly, carries easily, and has plenty of capacity for any framing or finish tasks I've thrown at it. Oh, and the clean ball-valve drain set-up is a dream after the previous brass screw type that had a tendancy to seize. No bad feelings about P-C products, the pancake compressor just gave up the ghost early and had to be replaced with a more capable unit - so far the Dewalt seems like a super piece. A very good compressor - I replaced my hotdog style oil-less compressor when the connecting rod decided to break.
While at the local hardware store I saw the DeWalt D55155 compressor and thought, "geez, you could not miss that compressor!" The bright yellow paint made this compressor stand out and then that's when I saw the name Emglo. This compressor also has a ball valve on the bottom of the tank for easy draining. Those "T" shaped valves always had the tops broken off and were hard to operate. This ball valave is also inside the frame as is every component of the compressor. It also has a large handle on the front for carrying and it's big enough to get two hands on it. It's mounted inside the roll cage near the copper line running from the compressor to the tank. It might be, but, I put the compressor away from where I'm working so this is not an issue.
As with any compressor you have to keep the extension cords short.
So, would I buy this compressor again if I had to? You bet!. DeWalt takes a classic to a new level - As a full time contractor working alone I am always on the lookout for tools that will make the job go faster and easier. Last yearI spent many months researching a replacement for my ailing Campbell-Hausfeld oilless compressor. Originally I figured the CH had a higher air output, needed no oil changes,would work on slopes and start in cold weather.After forking over the big bucks and putting it to work for DeWalt's 30 Day trial period I couldn't believe I'd gone so long without this compressor. 1) First of all the Emglo name on the unit reassured me that I was getting a tool built by the industry leader with a great reputation for tough, dependable compressors. The first day on the job proved it with quick cycling times and ample air at all times. I do a lot of work in luxury high rises and I've often left the compressor at home rather than drag it down endless corridors. I've paid for the compressor already in labor savings by bringing it to every trim job. I've had othe craftsmen come over and ogle the compressor and ask questions about it, but mostly admiring it.I am percieved as a serious craftsman based on my setup (along with my Senco SFN-40)which is good for referrals.
In short, this is a serious tool for the professional contractor with loads of power(delivered air), durability, great design and looks. My only complaint is the air release lever, an otherwise solid unit mounted on the underside of the tank. The opening is too narrow for your hand and the sharp stream of air can actually cut your skin. In addition the compressor shoots out small chunks of ICE from the tank creating dangerous projectiles that will cut your hand or riccochet into your eye. Don't know why it does that but just beware and open the valve SLOWLY. Finally, I have a compressor that won't roll around in the back of the truck knocking off gauges and connections as I drive through the city. Hats off to DeWalt and Emglo for a match that combines legendary durability with great design.
60 pounds; 1-year warranty
