Belt driven air compressor - Hitachi EC16, Emglo MG8HGA-8P, Thomas Compressors TG-550H, Porter-Cable C5510, Hitachi EC25E, DeWalt D55271, Thomas Compressors TG-400HST, Porter-Cable CPLC7060V, Porter-Cable CFBN200A, DeWalt D55270

Belt Driven Air Compressor - 1 2

*2-1/2 HP Compressor, Oil \| Hitachi EC16*
	$N/A by Hitachi 30-day satisfaction guarantee and one-year warranty on parts and labor 15 amps Belt-drive motor
*8 HP Wheelbarrow Compressor* \| Emglo MG8HGA-8P**
	$1,877.00 by Emglo Enclosed steel belt guard Four-cylinder cast-iron pump 1/4 npt soft-seat drain valve Bullwhip idle control Integrated control panel

*5-1/2 Horsepower Oiled Wheeled Twin Pontoon Gas Compressor* \| Thomas Compressors TG-550H**
	$1,149.00 >> $933.42 by Thomas Compressors Honda 5.5 HP GX160 Engine with low oil shut down Automatic idle down control Direct-drive design - no adjustments Lightweight - only 96 lbs. 12 cfm at 100 psi - 8 HP performance, 5.5 HP price found in TG-550H's description: From the Manufacturer The TG-550H is the worlds first 2 cylinder direct-drive compressor. The innovative design does not use pulleys, flywheels, belts, or belt-guard assemblies. The compressor is bolted directly to the engine flange which results in a lightweight, compact machine that out-performs anything in its class.) and with air delivery of 12. The compressor never needs adjustment and air delivery remains contant, there is no loss of performance due to belt stretching or slippage.
*15 Amp 2 Horsepower 20 Gallon Oiled Wheeled Single Tank Compressor* \| Porter-Cable C5510**
	$387.26 >> $471.99 by Porter-Cable Cushioned handle grip, Standard Equipment: Compressor, High-FloSM air regulator and push to connect coupler, pneumatic tires and operating manual Full pneumatic tires for ease of mobility, Patented belt tensioning device 1.9 (running) HP induction motor for long life, High-FloSM air regulator and push to connect coupler, Oil-Lube Pump - for long life 150 PSI max for longer tool run time, 120 PSI cut-in pressure provides 30 PSI "Bonus Air" before a 90 PSI tool becomes inoperable 5.4 SCFM for faster tank recharge of 20 gal tank found in C5510's description: From the Manufacturer This very quiet 78 dBA, traditional belt drive oil lube, horizontal low profile, wheeled portable air compressor from Porter-Cable provides 20 gallons of air tank reserve at a 150 PSI maximum pressure which provides 71 percent more usable air over traditional 125 PSI maximum air pressure units operating tools that require 90 PSI. With a pressure switch controller that automatically restarts the motor at the 120 PSI falling tank pressure point you get this quicker motor/pump operation and bonus air delivery. Supports all nailing applications and moderate + air tool usage of most air tools. Includes 10 pneumatic wheels, foam padded metal handle, high air flow regulator/quick coupler and two gages. Patented automatic belt tensioning system. Reserve air tank is ASME approved.
*5.5-Horsepower Air* Compressor \| Hitachi EC25E**
	$1,612.12 >> $1,018.95 by Hitachi 30 day satisfaction guarantee and one year warranty on parts and labor Twin drain locks Cast iron pump Twin 4 gallon tanks 5.5 hp Honda engine found in EC25E's description: From the Manufacturer The EC25E is a commercial grade gas drive compressor from Hitachi. The 10-inch fly wheel includes a baffle to direct cool air towards the pump. Product Description Hitachi EC25E is a commercial-grade gas-driven compressor from Hitachi. The pump and crankcase feature oil-splash lubrication and a ball-bearing-mounted crankshaft, ensuring the compressor will be running for years to come. The unit's twin draincocks, one of each of the 4-gallon air tanks, makes it easy to purge the tanks of compressed air and condensation, helping prevent internal corrosion. In addition, the EC25E's large canister intake filter keeps the air running through the compressor and your nailer clean. The 10-inch flywheel includes a baffle to direct cool air towards the pump.
*8 Horsepower 8-Gallon Oiled Twin Pontoon Gas Compressor* \| DeWalt D55271**
	$2,814.37 >> $1,679.00 by DeWalt Low oil shut off provides greater engine protection 8 HP Honda OHV GX gas engine provides proven reliability and durability Low profile design for easy maneuverability Quad cylinder, cast iron, oil lubricated pump 16.2 cfm delivered @ 100 psi for high volume applications found in D55271's description: 2 cubic feet per minute @ 100 psi, while the low-profile design of the compressor means less operator fatigue and maximum job site maneuverability. Features include a beefed-up, totally enclosed steel belt guard, pneumatic tire, brass valves and fittings, stainless-steel braided after-cool tube, ball valve drain, and constant run control so the engine runs idle when not under load. The compressor includes a 3/8-inch regulator and an initial fill of DeWalt synthetic air compressor oil.2 cubic feet per minute delivered at 100 psi for high-volume applications Quad-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability Low-profile design for easy maneuverability 8-horsepower Honda OHV GX gas engine provides proven reliability and durability Low-oil shutoff provides greater engine protection Automatic idle control for reduced fuel consumption Pneumatic tire improves worksite mobility Ball valve drain allows for quick and thorough tank draining Specifications Drive: belt drive Horsepower: 8 hp Tank size: 8 gallons Power supply: Honda gas OHV GX engine Cubic feet per minute at 100 psi: 16. Includes DeWalt synthetic compressor oil 3/8-inch NPT pressure regulator Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.
*4 Horsepower 4 Gallon Oiled Twin Hot Dog Gas Compressor* \| Thomas TG-400HST**
	$999.00 by Thomas Compressors Fuel Capacity .66 Gal. Engine Honda GX120 4 HP OHV Gas Pressure Switch Continuous run unloader valve with idle down - Unloads @135 PSI, Loads @ 115 PSI Air Delivery 5.4 CFM @ 100 PSI Air Displacement 12.4 CFM found in TG-400HST's description: Longer Life - With the patented LifeGuard™ dirt deflector that keeps job site dust and grit out of the compressor, the new Renegade® will perform year after year Engine - Cast iron cylinder sleeve extends life of engine Perma-lube oil-less design for maintenance-free operation and quick cold weather starts Designed for Maintenance-free operation with no belts, belt guards or pulleys, which also means less vulnerability to job site damage High performance overhead valve design for added power and high efficiency .

*15 Amp 7 Horsepower 60-Gallon Oiled Vertical Compressor* \| Porter-Cable CPLC7060V**
	$832.24 >> $404.96 by Porter-Cable Three-year warranty 60-gallon tank supports heavy-duty, intermittent to continuous use of multiple tools Oil-lubricated pump with aluminum body and cast-iron cylinders for heat dissipation and durability 7 hp induction motor for efficient operation High-pressure technology provides more usable air for longer run time found in CPLC7060V's description: From the Manufacturer New from Porter-Cable! This heavy-duty stationary air compressor has a high-pressure design that allows it to store as much air as a 77-gallon tank. This provides more usable air and longer run times between refills-it's like being able to fit 20 gallons of gas in a 15-gallon tank-you'll get more done! A 7 hp, 240-volt induction motor powers this unit for maximum efficiency. Includes compressor, tank gauge, and operator's manual.0 HP Running 135 PSI - 77 gallon equivalent tank size as compared to conventional 125 PSI models 84 Dba Single stage, oil lubricated pump designed with aluminum body and head for best cooling and cast iron cylinder sleeves for best wear Pump contains automotive style pistons, rings, and connecting rod 240 Volt capacitor start induction motor with manual thermal overload protection Large tank pressure gauge for easy visibility and better accuracy 60 gallon air tank supports heavy duty, intermittent/continuous multi-tool usage Full-size belt guard Patented automatic belt tensioning system Standard Equipment: Compressor, ASME safety valve, tank gauge, oil, and operating manual SPECIFICATIONS Lubrication: Oil Lube Tank Size Gal. PSI: 135 SCFM Air Delivery @40 PSI: 14.2 SCFM Air Delivery @90 PSI: 9. found in CPLC7060V's reviews: pump bearings leaking after one year of light duty use - after one year of light duty use pump bearing leaking oil and fly wheel belt won't ride true . unit now in shop waiting for parts, down time three to four weeks, had to borrow small compressor from family member. I would not recomend this compressor at all. A better compressor would be home depots huskey 60 gal a much better built unit at 399.I think poter cable should stick to building beltsanders, routers,& sawzalls.
*18 Gauge Brad Nailer Compressor* Combo Kit \| Porter-Cable CFBN200A**
	$423.00 >> $175.00 by Porter-Cable 1 year limited warranty Complete kit with quick-connects, 25' 150 psi air hose, thread sealing tape, nailer case, and wrenches Oil-free compressor produces 3.7 scfm at 40 psi and 2.7 scfm at 90 psi Nailer features cushion grip, depth of drive, quick-release nosepiece, and directional exhaust Professional nailer shoots 3/4" to 2" 18 gauge brad nails found in CFBN200A's description: Here they've packaged their hard-working 18-gauge brad nailer with its power source--a 15 amp, 120-volt, 6-gallon compressor driven by a 2-horsepower oil-free motor. Fill up the nailer with standard 18-gauge brads from 3/4 inch to 2 inches long, hook up, and you're ready to install baseboards, chair rails, moldings, even make quick work of those wooden craft items like country shelves and vegetable bins. The kit comes with quick connects, 25 feet of 150 psi air hose and thread sealing tape.
*5-1/2 Horsepower 8 Gallon Wheeled Oiled Twin Pontoon Gas Compressor* \| DeWalt D55270**
	$1,609.74 by DeWalt Low profile design and pneumatic tire for mobility Automatic idle control for reduced fuel consumption Ball drain valve allows for quick and thorough tank draining Twin cylinder, cast iron, oil lubricated pump for durability and reliability 5.5 HP Honda GX gas engine provides proven reliability and durability found in D55270's description: The automatic throttle control allows the unit to idle and conserve fuel when air is not required. Other features include a braided steel after-cooler, heavy-duty belt guard, ball-type tank drain valves, and a 3/8-inch regulator with gauges. The D55270 comes complete with the initial fill of DeWalt synthetic air compressor oil.5-horsepower Honda OHV GX gas engine provides proven reliability and durability Low-oil shutoff provides greater engine protection Automatic idle control for reduced fuel consumption Pneumatic tire improves worksite mobility Ball valve drain allows for quick and thorough tank draining Specifications Drive: belt drive Horsepower: 5. Includes DeWalt synthetic compressor oil 3/8-inch NPT pressure regulator Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty Product Description 5.5 HP, 8 Gallon, Compressor Powered By A Honda GX Gas Engine With Proven Reliability & Durability, 8.9 CFM @ 100 PSI, Automatic Idle Control For Reduced Fuel Consumption, Low Oil Shut Off Provides Greater Engine Protection, Twin Cylinder, Cast Iron, Oil Lubricated Pump With Emglo's 50 Years Of Proven Durability & Reliability, Ball Valve Drain Allows For Quick & Thorough Tank Draining, Low Profile Design For Easy Maneuverability, Pneumatic Tire Improves Worksite Maneuverability, Includes: Dewalt Synthetic Compressor Oil & Pressure Regulator.