Air Compressor Water Trap - 1   2
6 Amp 3/4 Horsepower 2 Gallon Oil-Free Hot Dog Compressor | Thomas Compressors T-635HD
Thomas Compressors T-635HD
$369.00 >> $279.00
by Thomas Compressors

Long life, contractor quality machine - rated for continuous use
Low amp draw - works on 15 amp circuits and with extension cords
Versatile - offers framing, roofing or finish gun capability
3/4 Horsepower - delivers 1.7 cfm at 100 psi.
Lightweight and portable, only 26 pounds

found in T-635HD's description: From the Manufacturer
Thomas Industries T-635HD is a quiet running (69-decibel) 3/4 HP compressor that is both portable and versatile. Other uses include, tire inflating, painting, airbrushing, small air tools, and winterizing water lines and RV's.
2.5 HP 4 Gallon Oil-Lube Air Compressor | Porter-Cable CPLDC2541S
Porter-Cable CPLDC2541S
$369.99 >> $358.51
by Porter-Cable

Three year limited warranty
Complete with high-flow regulator and quick-connect, pressure gauge and tank gauge
Patent pending oil-lube system with ball bearing design
Direct drive, no belts or adjustments are necessary
2.5 HP, 4.3-gallon oil-lube compressor

found in CPLDC2541S's description: From the Manufacturer
Porter-Cable is proud to introduce our first oil-lube compressor. When we first put our engineers on the task of designing an oil-lube compressor we gave them one priority; it could not have the same imported pump as all the other major brands have. Just as in a car, the lubrication system in the pump is the most vital part in a compressor. The design features don't stop there; it boasts a cast-iron cylinder, stainless steel Swedish valves, and an automotive type paper filter to trap unwanted particles before they enter the system. Now, take this revolutionary pump engineered to last over 3,000 hours of use and add in the "High Pressure Technology" and you have compressor that will run at 150 pounds per square inch (PSI).5 horsepower induction motor is safely shrouded and acts as a wind tunnel providing more than enough air to cool the unit down even under the most strenuous conditions.3 HP Running
  • Patented oil lubrication system allows pump to be operated on an uneven surface
  • Universal, High-FloSM, push-to-connect coupler in air outlet
  • 150 PSI tank pressure, equivalent to a 7.3 gallon tank at 125 PSI, for 71% more stored work capacity
  • 83 Dba
  • Higher 120 PSI cut-in pressure assures nails will be completely driven in before pump cycles on
  • Two pole, 3,450 RPM capacitor start induction motor for maximum air delivery
  • High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
  • Low 12 Amp motor draw prevents accidental tripping of circuit breakers
  • 4 gallon storage capacity air tank supports heavy usage of stapler, brad, finish, roofing and framing nailer
  • Heavy duty cast iron cylinder construction and large 8 oz. oil capacity to assure long life
  • Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, oil, and operating manual

    SPECIFICATIONS

    • Lubrication: Oil Lube
    • Gauges: 2
    • Quick Couple: 1/4" NPT
    • Weight (Lbs. PSI: 150
    • SCFM Air Delivery @40 PSI: 5.4
    • SCFM Air Delivery @90 PSI: 4.
  • 2.5 HP 4 Gallon Oil-Lube Air Compressor | Porter-Cable CPLDC2540S
    Porter-Cable CPLDC2540S
    $580.00
    by Porter-Cable

    Three year limited warranty
    Full roll cage with high flow regulator and dual quick-connects
    Patent pending oil-lube system with ball bearing design
    Direct drive, no belts or adjustments are necessary
    2.5 HP, 4.3-gallon oil-lube compressor

    found in CPLDC2540S's description: From the Manufacturer
    Porter-Cable is proud to introduce our first oil-lube compressor. When we first put our engineers on the task of designing an oil-lube compressor we gave them one priority; it could not have the same imported pump as all the other major brands have. Just as in a car, the lubrication system in the pump is the most vital part in a compressor. The design features don't stop there; it boasts a cast-iron cylinder, stainless steel Swedish valves, and an automotive type paper filter to trap unwanted particles before they enter the system. Now, take this revolutionary pump engineered for maximum durability and life, and add in the "High Pressure Technology" and you have compressor that will run at 150 pounds per square inch (PSI).5 horsepower induction motor is safely shrouded and acts as a wind tunnel providing more than enough air to cool the unit down even under the most strenuous conditions. oil capacity to assure long life
  • Patented oil lubrication system allows pump to be operated on an uneven surface
  • Protected panel includes two universal High-FloSM push-to-connect couplers and larger, easy to read regulated air pressure gauge
  • 150 PSI tank pressure, equivalent to a 7.3 gallon tank at 125 PSI, for 71% more stored work capacity
  • 83 Dba
  • Higher 120 PSI cut-in pressure assures nails will be completely driven in before pump cycles on
  • Two pole, 3,450 RPM capacitor start induction motor for maximum air delivery
  • High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
  • Specially designed protective transport handles
  • Low 12 Amp motor draw prevents accidental tripping of circuit breakers
  • 4 gallon storage capacity air tank supports heavy usage of stapler, brad, finish, roofing and framing nailer
  • Standard Equipment: Compressor, ASME safety valve, air regulator and gauge, 1/4" quick coupler, oil, and operating manual

    SPECIFICATIONS

    • Lubrication: Oil Lube
    • Gauges: 2
    • Quick Couple: 1/4" NPT
    • Weight (Lbs. PSI: 150
    • SCFM Air Delivery @40 PSI: 5.4
    • SCFM Air Delivery @90 PSI: 4.
      found in CPLDC2540S's reviews:
      A- compressor except for the regulator - I've been searching for a portable compressor for a couple of months now and near the end came up with three to chose from: the Emglo 55155, a Hitachi dual stack and this PC. Other compressors did meet these, but what draw me was the oil lube system that permits you to use it on uneven surfaces.5max) to not trip the circuit breakers, filtered intake (not output though) for longer motor life, shrouded motor for airflow from fan and good manual. The only thing I added at the universal coupler end is a water/air filter.
  • The Hotdog 12.4 Amp 2 Horsepower 2-1/2 Gallon Oiled Single Hotdog Compressor | Makita MAC700
    Makita MAC700
    $288.00 >> $176.40
    by Makita

    18 by 10 by 22 inches; 52 pounds; 1-year warranty
    1/4-inch brass Makita universal coupler
    Cast-iron pump and roll cage construction
    3.3 cfm delivered at 90 psi; low 1,720 rpm extends motor life and lowers noise
    12.4 amp, 2-horsepower, 2-1/2-gallon oiled single hot dog compressor with handle

    found in MAC700's description: From the Manufacturer
    The new MAC700 - Hotdog compressor by Makita is blowing away the competition with built-in features such as a super quiet motor that draws only 12.0HP AIR COMPRESSOR 12. hot dog tank Low amp draw & oil lubricated Roll-bar handle Industrial air filter & cast iron cylinder Oil sight glass & lever handle ball valve Built-in thermal overload for motor protection MAC700 2HP AIR COMPRESSOR.
    found in MAC700's reviews:
    An Airbrushing Powerhouse -

    I use it to power airbrushes along with an added-on airbrush regulator/gauge/moisture trap. This is exactly what I wanted for airbrushing. It has a much longer lifespan than "airbrush compressors". The airbrushes work consistently all throughout the refill phase. This is the muscle car of airbrush compressors even though it was made in Taiwan. 5 to 10 minutes of airbrushing in silence, and when it comes on it does have some volume, but it is so much less noise than an oilless.

    Quick Flow 3-in-1 Air Compressor | Wagan 2014
    Wagan 2014
    $29.99 >> $17.49
    by Wagan

    Comes with 10-foot power cord that plugs into 12-volt car cigarette lighter
    Comes with 1 sports needle and 2 nozzle adapters
    Inflates average tires in 5-7 minutes
    Built-in work/emergency light
    275 PSI high pressure air compressor

    found in 2014's description: We doubt you'll be able to find a more versatile compressor for the price. --Kris Jensen-Van Heste

    Product Description
    The Wagan 3-in-1 Air Compressor is perfect for vehicles, bike tires, balls, air mattress, and more. The special features include a high pressure compressor that generates 275 PSI, high air flow inflator for quick inflation, built-in light, and pressure gauge.

    Product Description
    Handy portable air pump runs from the car cigarette lighter. Be prepared for the unexpected with 12V tire air inflators. Air Pump Inflates: Bike Tires, Car Tires (SUV, Truck), Athletic Balls, Air Mattresses, Rafts, Inflatable Furniture, Air Tools. Air Pressure (max)of Tire Inflator: 275PSI Special Features of this 12 Volt Auto Air Inflator: High Pressure 275 PSI High Air Flow Inflator Built-in Work light/Emergency light Inflates average sized tires (16') in 5-10 minutes Pressure Gauge Reader Continuous Usage Time: Tire Inflator Has A Heavy Duty Motor. Accessories: 3 Nozzle adapters: collar, tire inflator nozzle, sports needle 12V Power Cord: 10 ft cord High Pressure Air Hose: 14' Air Hose with quick release valve connector Power Source of Tire Inflators: 12V cigarette lighter accessory receptacle Low Power Consumption.
    found in 2014's reviews:
    GREAT IDEA -
    THIS CAN BE USED IN MOTOR HOME, ON A BOAT, TAKE IT WITH YOU WHEN YOU GO CAMPING, COULD BE USED FOR AIRING UP AIR MATTERESS, WATER TOYS, FLAT TIRES, BEACH BALL.

    15 Amp 2 Horsepower 6-Gallon Oil-Free Pancake Compressor | Porter-Cable CPFAC2600P
    Porter-Cable CPFAC2600P
    $316.16 >> $167.00
    by Porter-Cable

    32 pounds; 1-year warranty
    Includes compressor, ASME safety valve, regulator, gauges, 1/4-inch quick coupler, manual
    Cast-iron construction
    Provides 3.7 cfm at 40 psi and 2.6 cfm at 90 psi; air-regulator and quick-connect coupler
    15 amp, 2-horsepower, 6-gallon oil-free pancake compressor; handle; built-in thermal overload protector

    found in CPFAC2600P's description: com Review
    This Porter-Cable 2-horsepower, 6-gallon pancake compressor transports easily but has plenty of capacity and power--enough to support heavy use of brad and finish nailers and moderate use of framing nailers. Features include a high-flow regulator, an easy-to-read air pressure gauge, automatic thermal overload protection, an industrial-style quick-connect body in the air outlet, and a long-life motor with replaceable brushes. The compressor weighs 32 pounds and has a handle built into the motor housing, so it's relatively portable. This Porter-Cable is as convenient and easy to use as any compressor out there, and it's just about ideal for brad and finish nailers that are being used inside people's homes on a regular basis. --Jonathon Tudor

    From the Manufacturer
    This oil-free 2-hp pancake-style air compressor has a new high pressure design that provides 28-percent more usable air! This allows more run time and less down time. The high-flow regulator keeps the tank pressure between 120 PSI and 150 PSI, allowing a greater reserve air capacity. Lightweight for portability, this compressor has plenty of power to fire all brad and finishing nailers as well as moderate usage of roofing and framing nailers. Includes compressor, high flow air regulator and gauges, quick coupler, and instruction manual.8 HP Running
  • Built-in automatic thermal overload protection
  • Larger Easy to read regulated air pressure gauge
  • Universal, High-FloSM, push-to-connect coupler in air outlet
  • One year warranty
  • 150 PSI - 10 gallon equivalent tank size as compared to conventional 125 PSI model
  • 87 Dba
  • Oil-free pump design for durability and no maintenance
  • Long-life motor with replaceable brushes
  • High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
  • 6 gallon tank supports heavy usage of stapler, brad and finish nailer, standard-to-heavy roofing and standard framing nailer
  • 120 Volt, universal motor starts easily under low voltage conditions
  • Extension cord use without tripping circuit breakers
  • Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual

    SPECIFICATIONS

    • Lubrication: Oil Free
    • Gauges: 2
    • Quick Couple: 1/4" NPT
    • Weight (Lbs. PSI: 150
    • SCFM Air Delivery @40 PSI: 3.7
    • SCFM Air Delivery @90 PSI: 2.

      Product Description
      2 HP, 6 Gallon, Oil-Free Pancake Air Compressor, 150 PSI Maximum Tank Pressure, 3.6 SCFM @ 90 PSI 87 DBA, 15 AMPS, Built-In Thermal Over Load Protection, Hi-Flo Air Regulator With Quick-Connect Coupler, Regulated Pressure Gauges, Includes ASME Safety Valve, 1 Year Warranty.
      found in CPFAC2600P's reviews:
      Once pneumatic, you never go back - The Porter-Cable 2HP 6-gallon pancake compressor is a reasonably powerful and reasonably portable air compressor. I only recently purchased one but I am already sold on pneumatic tools, which the PC 6-gallon compressor operates surprisingly well. Although many pneumatic tools, such as air hammers, drills, and sanders, consume quite a bit of air (generally in the neighborhood of 5 CFM at 90 PSI), I have found that my PC compressor does just fine with its modest 2. My one complaint is that the motor and compressor are a bit louder than I expected. Then again, the noise of the compressor is hardly noticeable above the din of an air hammer, so I'm not sure it really matters.

      If you enjoy using power tools and you have not yet experienced the pleasures of pneumatic gizmos, you should consider purchasing a small but serious compressor like the PC 2HP 6-gallon pancake. It's truly amazing how versatile compressed air is; basically any tool that runs on electricity also comes in a pneumatic version (well, except for arc welders).

      But be warned! If you take the plunge into pneumatic tools, there is an endless stream of items you will find yourself purchasing: air tool lubricants and cleaning kits, in-line oilers, air hoses and gauges, quick connectors, air filters, oil-water separators, Teflon tape, universal air hose joints, air manifolds, blowguns with assorted nozzles, etc.)

      One odd thing I've noticed is that the PC 6-gallon compressor is virtually identical to the Craftsman 6-gallon compressor, right down to the paint job.

  • 15 Amp 2-3/4 Horsepower 4 Gallon Oiled Single Hot Dog Compressor | DeWalt D55155
    DeWalt D55155
    $676.00 >> $365.00
    by DeWalt

    23 by 23 by 13-1/2 inches; 68-1/2 pounds; 1-year warranty
    Includes DEWALT synthetic compressor oil and pressure regulator
    Cylinder constructed of cast iron
    4-1/2 cfm delivered at 100 psi; dual soft start valve for cold-weather starts; oil-lubricated pump
    15 amp 2-3/4-horsepower 4-gallon oiled twin hot dog compressor with carrying handle

    found in D55155's description: com Review
    At just a foot high and less than two feet wide out of the carton, this compressor was quite a bit smaller than we expected, so to be fair, we quickly lowered our expectations. The joke was on us, though, because this little powerhouse just doesn’t quit, and we learned that you can’t judge a compressor by its size. Emglo’s half-century in the compressor business is evident in this model, and with a couple of small exceptions (we’ll get into that in a minute), we don’t think anyone could make a finer piece of air power. Now, this may be a plus or a minus in your book, but we liked the fact that the compressor is factory set to power on at 100 psi an+d shut off at 120 psi, and the cycle time was under 15 seconds.) It has air aplenty for two nailers at once, and with that fast recovery, the job will get done in no time.

    In balance, this is one of the best compressor’s we’ve seen for the size, power, ruggedness and incredible portability it offers. Here’s to a great pairing of two great toolmakers.--Kris Jensen-Van Heste

    Product Description
    DeWalt's 2-horsepower, 4-gallon compressor features an oil-lubricated design with a cast-iron cylinder to guarantee job site durability. The new roll-cage design and integrated control panel protects the compressor and the controls from accidental damage. Carrying the compressor is easy, too: the flat design lets the user tote the compressor comfortably like a suitcase. The package comes with the initial fill of DeWalt synthetic air compressor oil.

    From the Manufacturer
    This 4-gallon hand-carry compressor was designed to meet the tough demands of the job site. The handle is situated to allow the user to carry the compressor with one hand in a natural walking position. The roll cage and integrated instrument panel protect the compressor and instruments from damage. Comes with the initial fill of DeWalt's synthetic air compressor oil.

    Includes

    • DeWalt synthetic compressor oil
    • 2 universal quick couplers
    • Regulator

    Warranty
    This DeWalt high-performance industrial tool comes with a warranty package that includes:
    30-day, no-risk satisfaction guarantee
    One-year free service contract
    One-year warranty

    Product Description
    2 HP, 4 Gallon, Electric Single Tank Hand Carry Compressor, 4.
    found in D55155's reviews:
    superb, and not easy to miss - Which is all you'll notice, which is great! I'd give it 6 stars if it had a flush mounted or built-in water separator/tool oiler.
    And, with power tool cords, compressor hoses, ladders, saw horses, joists and rafters, not to mention canine helpers, we Never foul anything on this smooth, flush mounted unit (dogs avoid it, too).

    14.5 Amp 2 Horsepower 4 Gallon Oiled Twin Hot Dog Compressor | Hitachi EC12
    Hitachi EC12
    $417.29 >> $207.00
    by Hitachi

    60 pounds; 1-year warranty
    Includes DEWALT synthetic compressor oil and pressure regulator
    Cylinder constructed of cast iron
    4.1 cfm delivered at 90 psi; shut-off valve at line and auto reset
    14-1/2 amp 2-horsepower 4-gallon oiled twin hot dog compressor with carrying handle

    found in EC12's description: com
    Hitachi’s 2-horsepower compressor is one of the hardest-working units on the market.1 cfm of free air at 90 psi--enough to easily run two tools at once. Because of its compact size and trim weight, it’s the perfect compressor for the home do-it-yourselfer, but taking into account its power and portability, contractors will love it, too.--Kris Jensen-Van Heste

    From the Manufacturer
    This Hitachi air compressor is powered by a 2 hp, 115-volt direct-drive motor and oil lube pump at 3,450 rpm.1 cfm of free air, at 90 psi.

    From the Manufacturer
    The Hitachi EC12 air compressor is powered by a 2-horsepower, 115-volt direct-drive motor and oil lube pump at 3,450 rpm. It delivers 4 cubic feet per minute of free air at 90 psi.2 cubic feet per minute of free air

    Specifications

    • Horsepower: 2
    • Amps: 15
    • Speed: 3,450 rpm
    • Air displacement: 8. Oil lube single piston compressor type, line regulator with gauge, direct drive electric motor, suction cup feet for extra stability, O-ring on draincock makes valve easy to open and close and resists stripping, vertically stacked twin tanks.
      found in EC12's reviews:
      Hitachi quaility and plenty of air. - This compressor has outlasted several other brands. We simply do not run out of air no matter how fast we are working with the Senco SFN40's. One thing we did add was a water/oil separator and filter to protect our work and our guns.

      While I have given this compressor a 5 star rating, there are some things for the engineers (and you!) to think about in the next model: 1. This means you have to hold it out away from your body a bit more than the size of the compressor would promise.

      These are relatively small gigs on a really great compressor.

    15 Amp 7 Horsepower 60-Gallon Oiled Vertical Compressor | Porter-Cable CPLC7060V
    Porter-Cable CPLC7060V
    $832.24 >> $404.96
    by Porter-Cable

    Three-year warranty
    60-gallon tank supports heavy-duty, intermittent to continuous use of multiple tools
    Oil-lubricated pump with aluminum body and cast-iron cylinders for heat dissipation and durability
    7 hp induction motor for efficient operation
    High-pressure technology provides more usable air for longer run time

    found in CPLC7060V's description: From the Manufacturer
    New from Porter-Cable! This heavy-duty stationary air compressor has a high-pressure design that allows it to store as much air as a 77-gallon tank. This provides more usable air and longer run times between refills-it's like being able to fit 20 gallons of gas in a 15-gallon tank-you'll get more done! A 7 hp, 240-volt induction motor powers this unit for maximum efficiency. Includes compressor, tank gauge, and operator's manual.0 HP Running
  • 135 PSI - 77 gallon equivalent tank size as compared to conventional 125 PSI models
  • 84 Dba
  • Single stage, oil lubricated pump designed with aluminum body and head for best cooling and cast iron cylinder sleeves for best wear
  • Pump contains automotive style pistons, rings, and connecting rod
  • 240 Volt capacitor start induction motor with manual thermal overload protection
  • Large tank pressure gauge for easy visibility and better accuracy
  • 60 gallon air tank supports heavy duty, intermittent/continuous multi-tool usage
  • Full-size belt guard
  • Patented automatic belt tensioning system
  • Standard Equipment: Compressor, ASME safety valve, tank gauge, oil, and operating manual

    SPECIFICATIONS

    • Lubrication: Oil Lube
    • Tank Size Gal. PSI: 135
    • SCFM Air Delivery @40 PSI: 14.2
    • SCFM Air Delivery @90 PSI: 9.
      found in CPLC7060V's reviews:
      So far so good - I've had this compressor for about a year and like it. I bought it when I switched to air tool sanding and it easily keeps up with that job. The manual advises you to releive the air pressure though the quick relief valve, automatically down to about 10PSI, then opening the water drain and closing the valve before restarting.
  • 3HP/ 4 Gallon Oiled Twin Hot Dog Compressor | Stanley Bostitch CWC200ST
    Bostitch CWC200ST
    $329.99 >> $279.99
    by Bostitch

    5.1CFM @40 and 4.0CFM @90
    Synthetic pump oil for low temp operation
    Dual air outlets
    Cast iron pump cylinder for extreme durability
    3 peak HP 15 amp induction motor

    found in CWC200ST's description: From the Manufacturer
    3HP Oil Lube Stack Tank Compressor.

    Product Description
    Portable, electric powered compressor with 3 HP, high output, heavy-duty induction motor.
    found in CWC200ST's reviews:
    Compressor head is OK but the extra parts are of low quality - I bought one of these compressors a couple of months ago after doing carefull research and actually going to a repair facility here in AZ that handles warranty repairs for a variety of brands. I estimate that the compressor has about 15 (fifteen) hours of use by now. The condensation drains are installed in a bad place and when open do not drain because they are too high on the tanks I estimate that it will have over a QUART of water inside each tank before any will reach the drains. You will have to tilt the compressor down and rock it side to side to get the water out, furthermore when tilted the lower drain hits the floor impedig drainage so you actually have to lift this rather heavy machine and tilt it and rockit at the same time in order to drain.
    Shortly after purchasing the unit one of the Quick Disconnects on the compressor will not seal itself after the hose is taken off and will merily leak all the air out in about one minute, I had to replace that so I could use the machine. For about the last five hours of use I started to notice that if left pressurized overnight the air was gone in the morning upon closer inspection I could hear a faint hiss comming from somewhere behind the regulator It was not much just enough to leak and turn the machine on about every 15 minutes even if I did not use air. Yesterday the manual regulator prooved to be the culprit as when I started the compressor for the first time it would not hold air at all. I put my head next to it to listen for the noise of air escaping and sure enough there was a faint hisssss. While I was trying to figure out where the noise is caming from The back of the manual regulator popped loose again suddenly letting all the air escape in an instant startling me and prompting my wife to ask from the kitchen some ways away: "did you do that on purpose?" Well NO. Overall the tech was right the actuall compressor is well done I believe he said it was Italian made the rest is rather sloppy and not thought out well.

    Air Compressor Water Trap - 1   2

    Porter-Cable (27)
    Campbell Hausfeld (18)
    DeWalt (14)
    Emglo (10)
    Thomas Compressors (9)
    Bostitch (9)
    Makita (6)
    Hitachi (5)
    Porter Cable (4)
    Grip Rite (3)
    GRIP-RITE (2)
    Palmgren (2)
    Wagan (1)
    Stanley Hand Tools (1)
    AccuSet (1)
    Q Industries (1)
    Senco (1)
    Xantrex Technologies (1)
    Black & Decker (1)
    Ingersoll Rand (1)

    Other Searches:

    Air Compressor Water Trap
    Air Compressor Water
    Air Compressor Water Seperator
    Air Compressor Water Filter
    Air Compressor Filter Water
    ©2006