Air compressor pump part - Porter-Cable C2550, DeWalt D55275, DeWalt D55585, Grip Rite GR2500, DeWalt D55151, Porter Cable C3151, DeWalt D55271, Campbell Hausfeld VT6290, Emglo MK15A8P-DVS, Porter-Cable C5510

Air Compressor Pump Part - 1 2 3 4 5 6 7 8

*4 Gallon, 150 PSI, Oil-lube, Mobile Compressor* \| Porter-Cable C2550**
	$279.00 >> $279.00 by Porter-Cable Includes 1 year limited warranty on parts and accessories High-flo air regulator and push to connect coupler 12 Amp current required, 120 Volts/60 Hertz/ 1 phase 150 PSI tank pressure for longer tool run time 2.5 HP (peak)/1.3 HP (running) 4 gallon, mobile contractor ??pancake?? style tank air compressor found in C2550's description: contractor style compressor is packed with features. It also has an cast iron oil-lube pump which is designed for durability and long use. The High-flo air regulator and 2-port removable console are winning combinations for contractors. Having the ability to remove the console gives the user the opportunity to remote air regulation and gain higher air pressure closer to the job site. The full roll cage frame adds protection for the pump and motor.
*9 Horsepower 17 Gallon Wheeled Oiled Single Hot Dog Gas Compressor* \| DeWalt D55275**
	$2,882.60 >> $1,399.99 by DeWalt ASME coded 17-gallon OSHA recognized tank Automatic idle control for reduced fuel consumption Ball drain valve allows for quick and thorough tank draining Four cylinder, cast iron, oil lubricated pump for durability and reliability 9 HP Honda GX gas engine provides proven reliability and durability found in D55275's description: It's powered by an 8-horsepower Honda engine with automatic throttle control to conserve fuel when air is not being used. The cast-iron four-cylinder pump is designed and built for longevity. Compressor includes a 3/8-inch regulator and the initial fill of DeWalt synthetic air compressor oil.2 cubic feet per minute delivered at 100 psi for high-volume usage Quad-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability Dual wheels make maneuvering easier on the worksite 8-horsepower Honda OHV GX gas engine provides proven reliability and durability Low-oil shutoff provides greater engine protection Automatic idle control for reduced fuel consumption ASME-coded 17-gallon OSHA-recognized tank Ball valve drain allows for quick and thorough tank draining Specifications Drive: belt drive Horsepower: 8 hp Tank size: 17 gallons Power supply: Honda gas OHV GX engine Cubic feet per minute at 100 psi: 16.2 cfm Pump speed: 890 rpm Tool length: 43 inches Tool width: 20. Includes DeWalt synthetic compressor oil 3/8-inch NPT pressure regulator Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.

*15 Amps/ 8Amps 2 Horsepower 17-Gallon Electic Wheeled Portable Compressor* with Dual Vo \| DeWalt D55585**
	$1,812.29 >> $849.99 by DeWalt Ball valve drain allows for quick and thorough tank draining Dual voltage feature allows easy switching from 120 to 240 volts Dual control feature allows start/stop or constant run option Twin cylinder, cast iron, oil lubricated pump 8.4 cfm delivered at 100 psi with 17-gallon tank found in D55585's description: From the Manufacturer You will never run short of air again with this 2-horsepower electric wheeled compressor supported by an ASME-coded 17-gallon OSHA-recognized tank. The twin-cylinder, cast-iron, oil-lubricated pump is backed by Emglo's 50 years of proven durability and reliability. The pump delivers 8. The user can quickly and completely drain the compressor by the ball valve drain, which won't clog like other models that use needle valves. The D55585 includes DeWalt's synthetic compressor oil and a 3/8-inch NPT pressure regulator.4 cubic feet per minute delivered at 100 psi, enables speedy recovery Twin-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability 2-horsepower motor provides increased performance Dual wheels make maneuvering easier on the worksite Dual control feature allows start/stop or constant run operation Dual voltage feature allows easy switching from 120- to 240-volt operation ASME-coded 17-gallon OSHA-recognized tank Ball valve drain allows for quick and thorough tank draining Specifications Drive: belt drive Horsepower: 2 hp Tank size: 17 gallons Power supply: 2-pole induction motor Cubic feet per minute at 100 psi: 8.4 cfm Pump speed: 1,070 rpm Tool length: 43 inches Tool width: 20. Includes DeWalt synthetic compressor oil 3/8-inch NPT pressure regulator Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.
*15 Amp 3 Horsepower 4-1/4 Gallon Oiled Twin Pontoon Compressor* \| Grip-Rite GR2500**
	$299.00 >> $299.00 by Grip Rite 12-Month limited warranty Electric direct drive and oil splash lubricated for longer life Superior Quality Speroni?� pump Life expectancy of up to 8,000 hours Contractor grade, 3 HP (peak), 4.2 gallon capacity found in GR2500's description: These same principles are now reflected in Grip-Rite's line of professional quality tools and compressors. This is currently Grip-Rite's flagship compressor for good reason. The pump is manufactured by industry leader Speroni® and driven by an industrial grade 3 HP (peak) motor. The pontoon-style tank design of this unit was intended to minimize tip over while still offering enough air to handle nearly any job.2 gallon tank, 64 lbs total weight, 55 second pump up, 14 second recovery, and 135 max psi, 14. Compare to: Hitachi EC119, Porter Cable Job-boss Model #C3551, Porter-Cable CPLDC2541S, Porter-Cable CPLDC2540S, Rol-Air The Bull.
*14 Amp 2-1/2 Horsepower 4-Gallon Oiled Twin Hot Dog Compressor* \| DeWalt D55151**
	$449.35 >> $219.99 by DeWalt 18-1/2 by 15 by 16-3/4 inches; 60 pounds; 1-year warranty Includes DEWALT synthetic compressor oil and pressure regulator Cylinder constructed of cast iron Delivers 3.2 cfm at 100 psi; features overload protection to eliminate risk of motor damage 14 amp 2-1/2-horsepower 4-gallon oiled twin hot dog compressor with carrying handle found in D55151's description: From the Manufacturer This versatile compressor can perform a multitude of jobs, from roofing to finish to trim to home/hobby applications. The pump is oil-lubricated for improved durability. The compressor delivers 3. Includes 3/8-inch regulator and initial fill of DeWalt synthetic air compressor oil.2 cubic feet per minute delivered at 100 psi, enables speedy recovery Oil-lubricated pump improves durability 4-gallon twin-stack tank design offers proven acceptance in the market Lightweight design improves portability Overload protection eliminates risk of motor damage Dual soft-start valves assist in cold weather startup Cast-iron cylinder enhances pump life Specifications Drive: direct drive Horsepower: 2-1/2 max hp Tank size: 4 gallons Power supply: 120-volt AC, 14 amps, 60 Hz, 2-pole induction motor Cubic feet per minute at 100 psi: 3.2 cfm Pump speed: 3,400 rpm Tool length: 18. Includes DeWalt synthetic compressor oil Pressure regulator Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty Product Description Portable electric powered compressor with 2 HP, high output motor. Oil lubricated pump improves durability.
Job Boss 15 Amp 3.5 Horsepower 4-1/2 Gallon Oil-Free Wheeled Single Hot Dog Compr \| Porter-Cable C3151
	$534.56 by Porter Cable 85 pounds; 1-year warranty Includes compressor, mobility kit, and manual Cast-iron construction 2-port removable console for remote air regulation; full roll cage to protect kit; 150 max psi 15 amp, 3-1/2-horsepower, 4-1/2-gallon oil-free wheeled single hot dog compressor with handle found in C3151's description: com Porter-Cable’s solved the compressor mobility problem on two levels with this tool. First, and most impressively, it’s got a two-port removable console for remote air regulation and higher air pressure right where you’re working. And the compressor itself has wheels and an extension handle, making life easier on you. Let’s face it: This compressor’s big, heavy and loud, with a max psi of 150. You can run three or four guns at once off it with a splitter and have no air supply problems whatsoever. It’s built tough for the job site (and the trips to and from), with a full roll cage to shield your pump and motor.5 gallon, oil-free contractor style compressor is packed with features. It starts with the oil-free pump which is designed for durability and long use. The high-flow air regulator and two-port removable console are winning combinations for contractors. Having the ability to remove the console gives the user the opportunity to remote air regulation and gain higher air pressure closer to the job site. The full roll cage frame adds protection for the pump and motor. Air delivery at 40 PSI: 7. What's in the Box C3151 Job Boss Compressor, mobility kit, manual.5 gallon, oil-free contractor style compressor is packed with features. It starts with the oil-free pump which is designed for durability and long use. The High-flo air regulator and 2-port removable console are winning combinations for contractors. Having the ability to remove the console gives the user the opportunity to remote air regulation and gain higher air pressure closer to the job site. The full roll cage frame adds protection for the pump and motor. Product Description Includes Compressor, Mobility kit, ASME safety valve, Operating manual, Limited one-year warranty. found in C3151's reviews: Used it today for the first time - I install windows as part of my job. I use an air hammer to break out the old windows and they require a lot of air. This compressor worked well with some catch up time but hey, it's only a 4 1/2 gallon tank. Cord wrap is fairly useless, handle makes it portable, regulator worked, switch and air release are protected. Dependable and... dependable - I've been using this compressor for about 3 months now. Nailing, stapling, and air cleaning. The pressure, for the most part, maintains its equillibrium. What I don't particularly care for about the unit is the airflow adjustment valve. and I don't trust it for the compressor's duraction. 05 update: I noticed one reviewer griped about this tank's compressor turning on frequently while using an air wratchet or something. that's an unfair assessment. Using such tools would cause the same reaction on any tank with the same air gallon capacity. From a homeowner - This is a great compressor. The manual says 15 Amps, but its more like a hair above that. It even tripped my 15 amp dedicated circuit for my sump pump. The copper one that pumps the air into the reservoir. (I definitely wouldn't want to buy a second compressor for that either. Aside from those minor inconveniences (hence the 4-stars), this is a very plug-and-playable compressor for the DIY homeowner. I made the mistake of buying one of the pancake style compressors and found it a little weak for doing the basement framing.
*8 Horsepower 8-Gallon Oiled Twin Pontoon Gas Compressor* \| DeWalt D55271**
	$2,814.37 >> $1,679.00 by DeWalt Low oil shut off provides greater engine protection 8 HP Honda OHV GX gas engine provides proven reliability and durability Low profile design for easy maneuverability Quad cylinder, cast iron, oil lubricated pump 16.2 cfm delivered @ 100 psi for high volume applications found in D55271's description: 2 cubic feet per minute @ 100 psi, while the low-profile design of the compressor means less operator fatigue and maximum job site maneuverability. The quad-cylinder, cast-iron, oil-lubricated pump has Emglo's 50 years of proven durability and reliability behind it. The compressor includes a 3/8-inch regulator and an initial fill of DeWalt synthetic air compressor oil.2 cubic feet per minute delivered at 100 psi for high-volume applications Quad-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability Low-profile design for easy maneuverability 8-horsepower Honda OHV GX gas engine provides proven reliability and durability Low-oil shutoff provides greater engine protection Automatic idle control for reduced fuel consumption Pneumatic tire improves worksite mobility Ball valve drain allows for quick and thorough tank draining Specifications Drive: belt drive Horsepower: 8 hp Tank size: 8 gallons Power supply: Honda gas OHV GX engine Cubic feet per minute at 100 psi: 16.2 cfm Pump speed: 890 rpm Tool length: 43 inches Tool width: 18. Includes DeWalt synthetic compressor oil 3/8-inch NPT pressure regulator Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.

*15 Amp 2 Horsepower 20 Gallon Oiled Wheeled Single Tank Compressor* \| Campbell Hausfeld VT6290**
	$457.71 >> $409.99 by Campbell Hausfeld Fully enclosed protective belt guard with "Directed" cooling fan. 5 HP Peak motor provides significant air flow. Operates on 120/240 volt service. Pre-wired for 120V. Unique product design from the largest manufacturer of reliable and durable, single stage CAST IRON pumps in the USA 20 Gallon ASME code tank for tough jobs. Rugged Cast Iron two cylinder pump provides up to 5,000 hours of extended life. Oil-Lubricated pump has a traditional design that is quieter and longer lasting. found in VT6290's description: From the Manufacturer The VT6290, 2 Running HP, wired for household current delivers enough air power to tackle tough jobs. The twin cylinder, oil lubricated, cast iron single stage pump runs quieter - so the compressor can be used in the same area that the work is taking place. Solid cast iron units are up to 35% quieter than aluminum units with cast iron cylinder sleeves, and dramatically quieter than direct drive aluminum compressors. These compressors are made in the US with a 3 year warranty. Product Description mfr: Campbell Hausfeld Air Products Campbell Hausfeld is a recognized leader in the home improvement and automotive industry. SINGLE STAGE AIR COMPRESSOR. Single Stage Cast Iron Compressor5 HP Peak, 20 Gallon. found in VT6290's reviews: VT6290 and FedEx - The box was busted on one side causing some of the content to spill outside (a tire and air filter). On top of that, FedEx delivered the box upside down, causing the discharge tube to bend, the air filter to separate from the pump, a busted pressure gauge and a bent handle bar. The kind people at Campbell Hausfeld will send me all the damaged parts at no cost to fix it. So I filled the ugly duckling with oil, did the 30 minute pump break in, and it worked very well. The compressor DOES NOT include oil. The air filter supplied causes the compressor to be kind of noisy. Except for the awful FedEx delivery, I am happy with the compressor. Free delivery, free air hose, no tax, and 10% off. Might work if received undamaged.......and with oil...and a few fixes - The shipping box is flimsy and cannot adequately support nor protect the compressor and parts. Mine arrived with a broken regulator, pressure gauge and air-filter assembly all of which apparently snapped off during shipment with no visible exterior box damage. As the other reviewer also mentioned the compressor does NOT come with oil so be sure to have SAE30 air-compressor oil ready when it arrives. Also, you will need to provide your choice of air outlet connector. If it wasn't for the bad shipment packaging I'd say initially that the compressor is a good buy but if Campbell Hausfeld has so little regard to protecting their product in shipment to you I question the integrity of the machine itself. UPDATE 7/15: I am updating this review a full day after receiving and can add more to the trials and tribulations of purchasing a C-H compressor. The air filter assembly is currently taped but working until I can get a replacment. After replacing the parts and turning on to run for the 10 minute break-in period I was plagued with mutliple leaks. All in all if you include travel time to Home Depot nearly 2-1/2 hours were spent just getting the compressor to work only to discover that there is a leak at weld where the pump mount attaches to the tank.) if using an extension cable as this compressor does draw a load when starting. IMHO I wouldn't order a product like this if you need it for an immediate job as it will take to either repair yourself or to return and await a replacement. I needed this compressor to replace my dead one and ordered it to coincide with my time at home as I could not expect my wife to unload it. I replaced the parts so that I could at least have use during the upcoming week off. To Amazon: it is just as important for you to insure that your customer will receive a product undamaged and to that end I lay partial blame on you for not checking product quality and packaging.
*1-1/2 Horsepower Dual Control Wheelbarrow Compressor* with Bracket and Regulator \| Emglo MK15A8P-DVS**
	$N/A by Emglo 2 cylinder cast iron pump Dual voltage switch 1/4 npt soft seat drain valve Oil lubricated Dual control switch
*15 Amp 2 Horsepower 20 Gallon Oiled Wheeled Single Tank Compressor* \| Porter-Cable C5510**
	$387.26 >> $471.99 by Porter-Cable Cushioned handle grip, Standard Equipment: Compressor, High-FloSM air regulator and push to connect coupler, pneumatic tires and operating manual Full pneumatic tires for ease of mobility, Patented belt tensioning device 1.9 (running) HP induction motor for long life, High-FloSM air regulator and push to connect coupler, Oil-Lube Pump - for long life 150 PSI max for longer tool run time, 120 PSI cut-in pressure provides 30 PSI "Bonus Air" before a 90 PSI tool becomes inoperable 5.4 SCFM for faster tank recharge of 20 gal tank found in C5510's description: From the Manufacturer This very quiet 78 dBA, traditional belt drive oil lube, horizontal low profile, wheeled portable air compressor from Porter-Cable provides 20 gallons of air tank reserve at a 150 PSI maximum pressure which provides 71 percent more usable air over traditional 125 PSI maximum air pressure units operating tools that require 90 PSI. With a pressure switch controller that automatically restarts the motor at the 120 PSI falling tank pressure point you get this quicker motor/pump operation and bonus air delivery. Supports all nailing applications and moderate + air tool usage of most air tools. Oil lubricated pump with aluminum body and head for best cooling and cast iron cylinder sleeve inserts for best wear. Includes 10 pneumatic wheels, foam padded metal handle, high air flow regulator/quick coupler and two gages. Reserve air tank is ASME approved.