32 pounds; 1-year warranty Includes compressor, ASME safety valve, regulator, gauges, 1/4-inch quick coupler, manual Cast-iron construction Provides 3.7 cfm at 40 psi and 2.6 cfm at 90 psi; air-regulator and quick-connect coupler 15 amp, 2-horsepower, 6-gallon oil-free pancake compressor; handle; built-in thermal overload protector
found in CPFAC2600P's description: com Review
This Porter-Cable 2-horsepower, 6-gallon pancake compressor transports easily but has plenty of capacity and power--enough to support heavy use of brad and finish nailers and moderate use of framing nailers. Features include a high-flow regulator, an easy-to-read airpressure gauge, automatic thermal overload protection, an industrial-style quick-connect body in the air outlet, and a long-life motor with replaceable brushes. The compressor weighs 32 pounds and has a handle built into the motor housing, so it's relatively portable. This Porter-Cable is as convenient and easy to use as any compressor out there, and it's just about ideal for brad and finish nailers that are being used inside people's homes on a regular basis. --Jonathon Tudor
From the Manufacturer
This oil-free 2-hp pancake-style aircompressor has a new high pressure design that provides 28-percent more usable air! This allows more run time and less down time. The high-flow regulator keeps the tank pressure between 120 PSI and 150 PSI, allowing a greater reserve air capacity. Lightweight for portability, this compressor has plenty of power to fire all brad and finishing nailers as well as moderate usage of roofing and framing nailers. Includes compressor, high flow airregulator and gauges, quick coupler, and instruction manual.8 HP Running
Built-in automatic thermal overload protection
Larger Easy to read regulated airpressure gauge
Universal, High-FloSM, push-to-connect coupler in air outlet
One year warranty
150 PSI - 10 gallon equivalent tank size as compared to conventional 125 PSI model
87 Dba
Oil-free pump design for durability and no maintenance
Long-life motor with replaceable brushes
High-FloSM airregulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
6 gallon tank supports heavy usage of stapler, brad and finish nailer, standard-to-heavy roofing and standard framing nailer
120 Volt, universal motor starts easily under low voltage conditions
Extension cord use without tripping circuit breakers
Standard Equipment: Compressor, ASME safety valve, airregulator and gauges, 1/4" quick coupler, and operating manual
SPECIFICATIONS
Lubrication: Oil Free
Gauges: 2
Quick Couple: 1/4" NPT
Weight (Lbs. PSI: 150
SCFM Air Delivery @40 PSI: 3.7
SCFM Air Delivery @90 PSI: 2.6
Pressure Release: YES
Regulator: YES
WARRANTY One-year warranty.
Product Description
2 HP, 6 Gallon, Oil-Free Pancake AirCompressor, 150 PSI Maximum Tank Pressure, 3.6 SCFM @ 90 PSI 87 DBA, 15 AMPS, Built-In Thermal Over Load Protection, Hi-Flo AirRegulator With Quick-Connect Coupler, Regulated Pressure Gauges, Includes ASME Safety Valve, 1 Year Warranty.
found in CPFAC2600P's reviews: Perfect for my needs and budget too - I have a small workshop with very little space and I need to have "air" available at times. The dial-up pressureregulator makes the use of certain accessories such as a small impact wrench or hammer much easier. The particular unit that I purchased at a local home center offered this compressor packed with a coiled air hose, blow gun, tire chuck, tire pressure gauge, NPT fittings, etc. However, I made a separate purchase of a 50' length of regular braided air hose for increased flexibility and mobility. Also, it's a bit difficult to use certain air tools with this model because the capacity and constant volume of air are not that great. What you see is Not what you Get! - Don't be fooled! To start with there is no pressure switch. Plenty of Gas - Lightweight and holds it's pressure great.
One Year Warranty Supports use of all brad and finish nailers and moderate use of framing and roofing nailers High-flow regulator allows more work at higher pressures 3 hp induction motor for quieter operation High-pressure technology provides more usable air for longer run time
found in CPF23400P's reviews: A good compressor to get you started. - I shopped extensively for a light duty compressor based on the following criteria: price, weight, and flow rating. It features the same motor and compressor as the PC 3HP twin stack model but is $40 cheaper and about 10 pounds lighter.
Other than that what can I say - it pumps air. Supposedly it runs at higher pressure (135 psi max) than its competitors. It is fairly loud, but I haven't listened to many other models to make an educated comparison. I have used it quite a bit for high air flow operations, such as blowing off dust / debris and even running an air chisel to bust up concrete. It often runs full time for 5-10 minutes and is able to keep up with air demand.
However, I do agree the regulator assembly is not adequately protected from damage. If you are going to be regularly moving the compressor around, spend the extra. I actually ran a compressed air line out to my garage, so the compressor can stay put in the basement and avoid potential damage from moving it.
*** 4-year update ***
I have owned this compressor for 4+ years now and am still completely satisfied. I did have one problem with a leaky pressureregulator. I was able to fix it a few times by disassembling the regulator housing but eventually stripped one of the connectors. I used a hand held, air chisel to break up the mortar joints. The compressor was operating at 100% duty cycle for 10-15 minutes at a stretch, but couldn't quite keep up with continuous use of the air chisel. As an last ditch experiment, I bought a 10 gal portable air storage tank, some extra quick disconnect fittings and rigged up a reserve tank in parallel with the 4 gallon PC tank. (yes, I am an engineer) My thinking was that I would run the crap out of my little PC and if it bit the dust, that was my excuse to buy a new compressor. I am amazed to say the PC compressor ran flawlessly for the entire chimney demo and still works fine today. Badly designed pressure switch - The pressure switch occasionally will not shut of the compressor. There is no consistancy in the amount of pressure it builds. I phoned the service center and they said they may not have the parts for this compressor and may have to order them. Great Little Air Squeezer!!! - This little Porter Cable compressor is all (and more) that I expected it to be. It pumps the 4-gallon tank to 125 psi in less than a minute, and then cycles automatically as the pressure drops. The output should be more than adequate for my needs to run an air ratchet, blow nozzle, hand sandblaster and pressurize a small auxilliary portable tank.
The gauges, regulator and hose coupling on this model are out in the open, and exposed to potential damage if used at a busy construction site. Something Different Inside - The pressure supplied is more than sufficient for average duty use. A slight tug on your air hose is enough to send it rolling.
Three year limited warranty Complete with high-flow regulator and quick-connect, pressure gauge and tank gauge Patent pending oil-lube system with ball bearing design Direct drive, no belts or adjustments are necessary 2.5 HP, 4.3-gallon oil-lube compressor
found in CPLDC2541S's description:From the Manufacturer
Porter-Cable is proud to introduce our first oil-lube compressor. When we first put our engineers on the task of designing an oil-lube compressor we gave them one priority; it could not have the same imported pump as all the other major brands have. Just as in a car, the lubrication system in the pump is the most vital part in a compressor. Now, take this revolutionary pump engineered to last over 3,000 hours of use and add in the "High Pressure Technology" and you have compressor that will run at 150 pounds per square inch (PSI).5 horsepower induction motor is safely shrouded and acts as a wind tunnel providing more than enough air to cool the unit down even under the most strenuous conditions.3-gallon side stack design comes complete with one high-flow quick-connect, a high-flow regulator, pressure gauge and tank gauge.3 HP Running
Patented oil lubrication system allows pump to be operated on an uneven surface
Universal, High-FloSM, push-to-connect coupler in air outlet
150 PSI tank pressure, equivalent to a 7.3 gallon tank at 125 PSI, for 71% more stored work capacity
83 Dba
Higher 120 PSI cut-in pressure assures nails will be completely driven in before pump cycles on
Two pole, 3,450 RPM capacitor start induction motor for maximum air delivery
High-FloSM airregulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
Low 12 Amp motor draw prevents accidental tripping of circuit breakers
4 gallon storage capacity air tank supports heavy usage of stapler, brad, finish, roofing and framing nailer
Heavy duty cast iron cylinder construction and large 8 oz. oil capacity to assure long life
Standard Equipment: Compressor, ASME safety valve, airregulator and gauges, 1/4" quick coupler, oil, and operating manual
81-1/2 by 19-1/4- 13-1/4 inches; 34 pounds; 6-gallon capacity; 1-year warranty Includes compressor, includes 25-foot coil hose, blow gun and attachments, tire chuck, tire gauge, quick coupler, plugs and Teflon tape, manual Cast-iron construction 1.5-horsepower; 3-1/4 sfcm; 150 psi max 1-1/2-horsepower 6-gallon pancake-style compressor with 13-piece accessory kit
found in C2001-WK's description: 5 Hp running pancake-style aircompressor has a new high pressure design that provides 71-percent more usable air over traditional 125 psi units. The high-flow regulator keeps the tank pressure between 120 PSI and 150 PSI, allowing a greater reserve air capacity. Lightweight for portability, this compressor has plenty of power to fire all brad and finishing nailers as well as moderate usage of roofing and framing nailers. Includes compressor, high flow airregulator and gauges, quick coupler, and instruction manual.)
Product Description
Includes Compressor, High-Flo airregulator and push-to-connect couplers, 13-piece accessory kit (includes 25' coil hose, blow gun and attachments, tire chuck, tire gauge, quick coupler, plugs and Teflon tape), Operating manual.
Three year limited warranty Full roll cage with high flow regulator and dual quick-connects Patent pending oil-lube system with ball bearing design Direct drive, no belts or adjustments are necessary 2.5 HP, 4.3-gallon oil-lube compressor
found in CPLDC2540S's description:From the Manufacturer
Porter-Cable is proud to introduce our first oil-lube compressor. When we first put our engineers on the task of designing an oil-lube compressor we gave them one priority; it could not have the same imported pump as all the other major brands have. Just as in a car, the lubrication system in the pump is the most vital part in a compressor. Now, take this revolutionary pump engineered for maximum durability and life, and add in the "High Pressure Technology" and you have compressor that will run at 150 pounds per square inch (PSI).5 horsepower induction motor is safely shrouded and acts as a wind tunnel providing more than enough air to cool the unit down even under the most strenuous conditions.3-gallon side stack design incorporates a complete roll cage that protects the dual high-flow quick-connects, the high-flow regulator and pressure gauge as well as the motor and pump. oil capacity to assure long life
Patented oil lubrication system allows pump to be operated on an uneven surface
Protected panel includes two universal High-FloSM push-to-connect couplers and larger, easy to read regulated airpressure gauge
150 PSI tank pressure, equivalent to a 7.3 gallon tank at 125 PSI, for 71% more stored work capacity
83 Dba
Higher 120 PSI cut-in pressure assures nails will be completely driven in before pump cycles on
Two pole, 3,450 RPM capacitor start induction motor for maximum air delivery
High-FloSM airregulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
Specially designed protective transport handles
Low 12 Amp motor draw prevents accidental tripping of circuit breakers
4 gallon storage capacity air tank supports heavy usage of stapler, brad, finish, roofing and framing nailer
Standard Equipment: Compressor, ASME safety valve, airregulator and gauge, 1/4" quick coupler, oil, and operating manual
SPECIFICATIONS
Lubrication: Oil Lube
Gauges: 2
Quick Couple: 1/4" NPT
Weight (Lbs. PSI: 150
SCFM Air Delivery @40 PSI: 5.4
SCFM Air Delivery @90 PSI: 4.0
Pressure Release: YES
Regulator: YES
WARRANTY Backed by a two year limited warranty.
found in CPLDC2540S's reviews: A- compressor except for the regulator - I've been searching for a portable compressor for a couple of months now and near the end came up with three to chose from: the Emglo 55155, a Hitachi dual stack and this PC. Other compressors did meet these, but what draw me was the oil lube system that permits you to use it on uneven surfaces. This should be the norm! Other good things are excellent build (USA), non-ball type draincock (ice can ruin a brass ball), pressure release valve (to lower the pressure before you open draincock that can shoot projectiles), caged, not too bad noise level about 83 dbA (noisy street), lower running 1.5max) to not trip the circuit breakers, filtered intake (not output though) for longer motor life, shrouded motor for airflow from fan and good manual. The regulator unit is actually the weak link here, made of plastic and from Taiwan. The only thing I added at the universal coupler end is a water/air filter. A great compressor - So far I'm really impressed with this compressor. The handle does make it fairly easy to transport, but it is still heavy so I recommend buying a second hose to reach the work instead of moving the compressor. The motor is quiet in relation to other compressors I've heard. The pressure gauges are easy to read and the pressure adjustment knob is simple to use. Great Little Compressor - This compressor packs a lot of power in a small package. The pressure controls are accurate which are very helpful in my situation.
60 pounds; 1-year warranty Includes DEWALT synthetic compressor oil and pressureregulator Cylinder constructed of cast iron 4.1 cfm delivered at 90 psi; shut-off valve at line and auto reset 14-1/2 amp 2-horsepower 4-gallon oiled twin hot dog compressor with carrying handle
found in EC12's description: com
Hitachi’s 2-horsepower compressor is one of the hardest-working units on the market.1 cfm of free air at 90 psi--enough to easily run two tools at once. Because of its compact size and trim weight, it’s the perfect compressor for the home do-it-yourselfer, but taking into account its power and portability, contractors will love it, too.--Kris Jensen-Van Heste
From the Manufacturer
This Hitachi aircompressor is powered by a 2 hp, 115-volt direct-drive motor and oil lube pump at 3,450 rpm. It features vertically stacked twin tanks (each with a 2-gallon capacity), line regulator, shutoff valve at line, auto reset, capacitor start, run class F motor, and pressure switch set at 125 psi kick-off, 100 psi kick-on.1 cfm of free air, at 90 psi.
From the Manufacturer
The Hitachi EC12 aircompressor is powered by a 2-horsepower, 115-volt direct-drive motor and oil lube pump at 3,450 rpm. It features vertically stacked twin tanks (each with a 2-gallon capacity), line regulator, shutoff valve at line, auto reset, capacitor start, run-class F motor, and pressure switch set at 125 psi kick-off and 100 psi kick-on. It delivers 4 cubic feet per minute of free air at 90 psi.
O-ring on draincock makes valve easy to open and close
Pressure switch has start/stop control at 100 and 125 psi with 14-second recovery time
15 amp motor runs at 3,450 rpm, providing 8.2 cubic feet per minute of free air
Specifications
Horsepower: 2
Amps: 15
Speed: 3,450 rpm
Air displacement: 8. Oil lube single piston compressor type, line regulator with gauge, direct drive electric motor, suction cup feet for extra stability, O-ring on draincock makes valve easy to open and close and resists stripping, vertically stacked twin tanks.
found in EC12's reviews: Compressor great, regulator bad - This compressor is a great value. It has a quality oil lubricated motor and is competitively priced with "oil-less" compressors of similar size and capacity. It works great with my various small air tools (palm nailer, impact wrench, etc). My only complaint: After a few hours of light use, the regulator dial became very hard to turn, and eventually stopped working altogether. I replaced the regulator with an inexpensive AmFlo model purchased at Lowes, and am much happier with the new one -- easier to adjust, more precise, and more accurate. If Hitachi included a better regulator, they would have a 5 star product. great quality, reasonable price - The other item is the brass stem out of the upper tank to the regulator; it positions the regulator in a location which is very susceptible to be knocked off. The positives: I've used it for over a year now, building two houses (both framing and finish guns), with little or no maintenance, the oil lubed compressor is fast. Excellent Compressor - The compressor is quiet, powerful, and reliable so far. I have looked at quite a few compressors and 95% of them have something hanging out waiting to be sheared off if impacted. I think it would be fairly simple for them to tuck the regulator assembly between the tank and pump to avoid possible damage but few manufacturers do so I didn't take any stars away for that. Great price, great compressor. I modified my compressor by bolting a single gang plastic electrical box to the leg under the regulator. The compressor power cord is spliced inside the box to a recepticle and a 25 foot 12ga cord that provides power to the recepticle for accessory power tools or extension cords, etc. Get It. - The other reviews about the regulator being in a vulnerable position are true and you need to take some care with location on the job. Take care to read all the instructions before using the compressor. The compressor ships without oil in the compressor and in my haste to get started I nearly missed filling it with oil. Hitachi quaility and plenty of air. - This compressor has outlasted several other brands. The machine has run two finishing guns continuously for almost a year and hasn't needed anything more than an oil change The regulator is predictable, and adjusts as easily as other brands. We simply do not run out of air no matter how fast we are working with the Senco SFN40's.
While I have given this compressor a 5 star rating, there are some things for the engineers (and you!) to think about in the next model: 1. The way the regulator is mounted it is difficult to make a manifold for two hoses without hanging those pipes out there where they can get knocked off. This means you have to hold it out away from your body a bit more than the size of the compressor would promise.
These are relatively small gigs on a really great compressor. Tremendous product, good value - )
The regulator stem is in an exposed position where it could be damaged/broken off if struck hard enough or handled carelessly, and the unit is every bit as loud as I expected (invest in some good earplugs) but still, I am extremely pleased my decision to go with this unit. A good little workhorse - Puts out enough air to keep two framing nailguns running at full speed.
I find that I am using the big shop compressor much less - it's just so easy to plug in the handy little Hitachi for everything. As the Hitachi uses an odd-sized thread for their gauges you have to either replace them with another (relatively expensive at $17 or so and weak plastic ) Hitachi gauge or replace the regulator and add a new gauge (costs a little more but most replacement regulators are better made than the original costs maybe $21 with a better gauge). oil cap pops up?! - whenever I start the compressor the oil cap pops up and splashes the oil out. Probably a pressure is building in but why?. Disappointing - As a previous writer indicated, the gauges got stuck, the pressure release valve froze, it wouldn't start and turned out to be uneconomical to repair. A real turd - It now pumps up, and doesn't stop until the pressure safety valve blows, then the motor goes into some kind of cardiac arrest. Now I'm sure I'll be raped at the repair center as I spend >$100 to repair this $200 turd. Hitachi EC12 2-Horsepower AirCompressor - Overall a great compressor. I have taken it everywhere, on roofs, in fields, in basements, run it off a generator, used it for almost everything you could use a compressor for, and it keeps on going. Nailing (framing and finishing) , small paint jobs with a cup gun or pressure pot, air chisle, air ratchet, air wrench, you name it. I have to carry a propane heater on the truck to warm up the compressor so it will run. Happy, but could be happier - The compressor is still fairly new and seems to provide excellent power for framing guns, finishing nailers, and hoppers. However, I am not incredibly impressed with this compressors ability to start. I realize during the cold winter mornings (not too cold in the San Francisco bay area), that some compressors require an empty tank to kick over, but this is getting a little ridiculous. On a 45 degree morning I don't even try to kick over the tank before making sure it is decompressed completely, and during the middle of the day I still have to, on a not-so-rare occasion, pull the pressure release valve. I have seen on another review that a Smart Start inlet filter can be purchased to cure this problem, but it's annoying that you need to buy new parts to cure problems on a new compressor.
I guess having only one complaint for a power tool isn't too bad, but I'm sure there's a better compressor out there.
18-1/2 by 15 by 16-3/4 inches; 60 pounds; 1-year warranty Includes DEWALT synthetic compressor oil and pressureregulator Cylinder constructed of cast iron Delivers 3.2 cfm at 100 psi; features overload protection to eliminate risk of motor damage 14 amp 2-1/2-horsepower 4-gallon oiled twin hot dog compressor with carrying handle
found in D55151's description:From the Manufacturer
This versatile compressor can perform a multitude of jobs, from roofing to finish to trim to home/hobby applications. The compressor delivers 3. Includes 3/8-inch regulator and initial fill of DeWalt synthetic aircompressor oil.
Includes
DeWalt synthetic compressor oil
Pressureregulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty
Product Description
Portable electric powered compressor with 2 HP, high output motor.
found in D55151's reviews: User friendly compressor - This is probably the best small compressor I have owned. It is very user friendly, relatively quiet and it comes up to full pressure rapidly.Previous small compressors I have owned were oiless types and were prone to freeze up under prolonged use. Packaging major problem - I'm sure the compressor will prove to be a great reliable workhorse, fired it up and it's not too loud, held the pressure. My problem has been receiving 3 damaged compressors.
Low profile design and pneumatic tire for mobility Automatic idle control for reduced fuel consumption Ball drain valve allows for quick and thorough tank draining Twin cylinder, cast iron, oil lubricated pump for durability and reliability 5.5 HP Honda GX gas engine provides proven reliability and durability
found in D55270's description: The automatic throttle control allows the unit to idle and conserve fuel when air is not required. Other features include a braided steel after-cooler, heavy-duty belt guard, ball-type tank drain valves, and a 3/8-inch regulator with gauges. The D55270 comes complete with the initial fill of DeWalt synthetic aircompressor oil.
Includes
DeWalt synthetic compressor oil
3/8-inch NPT pressureregulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty
Product Description
5.5 HP, 8 Gallon, Compressor Powered By A Honda GX Gas Engine With Proven Reliability & Durability, 8.9 CFM @ 100 PSI, Automatic Idle Control For Reduced Fuel Consumption, Low Oil Shut Off Provides Greater Engine Protection, Twin Cylinder, Cast Iron, Oil Lubricated Pump With Emglo's 50 Years Of Proven Durability & Reliability, Ball Valve Drain Allows For Quick & Thorough Tank Draining, Low Profile Design For Easy Maneuverability, Pneumatic Tire Improves Worksite Maneuverability, Includes: Dewalt Synthetic Compressor Oil & PressureRegulator.
85 pounds; 1-year warranty Includes compressor, mobility kit, and manual Cast-iron construction 2-port removable console for remote air regulation; full roll cage to protect kit; 150 max psi 15 amp, 3-1/2-horsepower, 4-1/2-gallon oil-free wheeled single hot dog compressor with handle
found in C3151's description: com
Porter-Cable’s solved the compressor mobility problem on two levels with this tool. First, and most impressively, it’s got a two-port removable console for remote air regulation and higher airpressure right where you’re working. And the compressor itself has wheels and an extension handle, making life easier on you.
Let’s face it: This compressor’s big, heavy and loud, with a max psi of 150. You can run three or four guns at once off it with a splitter and have no air supply problems whatsoever.5 gallon, oil-free contractor style compressor is packed with features. The high-flow airregulator and two-port removable console are winning combinations for contractors. Having the ability to remove the console gives the user the opportunity to remote air regulation and gain higher airpressure closer to the job site. Air delivery at 40 PSI: 7.
What's in the Box C3151 Job Boss Compressor, mobility kit, manual.5 gallon, oil-free contractor style compressor is packed with features. The High-flo airregulator and 2-port removable console are winning combinations for contractors. Having the ability to remove the console gives the user the opportunity to remote air regulation and gain higher airpressure closer to the job site.
Product Description
Includes Compressor, Mobility kit, ASME safety valve, Operating manual, Limited one-year warranty.
found in C3151's reviews: Good, But..... - The only complaint is that the outlet pressureregulator is cheap. Rattle can construction - This aircompressor will rattle out most of its bolts within a year. The Pressureregulator will fail in about a year as well, be prepared to spend a lot of maintenance money keeping this piece running. Porter-Cable C3151 - I asked tech support if this could just need to have the regulator adjusted - they said no; take it to a repair center. Left at repair center; after repair, informed they 'adjusted the regulator. Also doesn't appear to put out the volume of air advertised. Used it today for the first time - I use an air hammer to break out the old windows and they require a lot of air. This compressor worked well with some catch up time but hey, it's only a 4 1/2 gallon tank. Cord wrap is fairly useless, handle makes it portable, regulator worked, switch and air release are protected. Fine for finish nailers - This compressor is LOUD and ear protection should be worn if you work near it. The problem lies in the fact that the unit cycles at 115 psi which is lower than the hose pressure needed for rapid nailing. Dependable and... dependable - I've been using this compressor for about 3 months now. Nailing, stapling, and air cleaning. The pressure, for the most part, maintains its equillibrium. What I don't particularly care for about the unit is the airflow adjustment valve. and I don't trust it for the compressor's duraction.
05 update: I noticed one reviewer griped about this tank's compressor turning on frequently while using an air wratchet or something. that's an unfair assessment. Using such tools would cause the same reaction on any tank with the same air gallon capacity. From a homeowner - This is a great compressor. The manual says 15 Amps, but its more like a hair above that. The copper one that pumps the air into the reservoir. The cut-off pressure is not adjustable. (I definitely wouldn't want to buy a second compressor for that either. Aside from those minor inconveniences (hence the 4-stars), this is a very plug-and-playable compressor for the DIY homeowner. I made the mistake of buying one of the pancake style compressors and found it a little weak for doing the basement framing.
30-day satisfaction guarantee and a limited one-year warranty on parts and labor Exceptional air delivery 5.8 gallon tank handles a wide range of applications Line regulator with gauge 3.6 CFM at 90 PSI
32 pounds; 1-year warranty
