We should have known better when the first thing we saw was the word "Emglo" emblazoned in black on that famous DeWalt yellow. Emglo’s half-century in the compressor business is evident in this model, and with a couple of small exceptions (we’ll get into that in a minute), we don’t think anyone could make a finer piece of air power. DeWalt/Emglo’s great new roll-cage shape protects your investment in the shop, in the truck and at the job site, and the gauges are easier to read than many we’ve squinted at over the years. Now, this may be a plus or a minus in your book, but we liked the fact that the compressor is factory set to power on at 100 psi an+d shut off at 120 psi, and the cycle time was under 15 seconds.) It has air aplenty for two nailers at once, and with that fast recovery, the job will get done in no time.

In balance, this is one of the best compressor’s we’ve seen for the size, power, ruggedness and incredible portability it offers. Here’s to a great pairing of two great toolmakers.--Kris Jensen-Van Heste

Product Description
DeWalt's 2-horsepower, 4-gallon compressor features an oil-lubricated design with a cast-iron cylinder to guarantee job site durability. The new roll-cage design and integrated control panel protects the compressor and the controls from accidental damage. Carrying the compressor is easy, too: the flat design lets the user tote the compressor comfortably like a suitcase. The package comes with the initial fill of DeWalt synthetic air compressor oil.

From the Manufacturer
This 4-gallon hand-carry compressor was designed to meet the tough demands of the job site. The handle is situated to allow the user to carry the compressor with one hand in a natural walking position. The roll cage and integrated instrument panel protect the compressor and instruments from damage. Comes with the initial fill of DeWalt's synthetic air compressor oil.

Includes

• DeWalt synthetic compressor oil
• 2 universal quick couplers
• Regulator

Warranty
This DeWalt high-performance industrial tool comes with a warranty package that includes:
30-day, no-risk satisfaction guarantee
One-year free service contract
One-year warranty

Product Description
2 HP, 4 Gallon, Electric Single Tank Hand Carry Compressor, 4.
found in D55155's reviews:
Great !!! - After reading the reviews on Emglo compressors, I decided to get this DeWalt compressor because of the compact design. The design is great, very portable and solid feeling. I've used this, along with the P-C framer and finisher guns, and the DeWalt had no problem keeping up with either one, and I really pushed the framer when framing a 12 x 16 storage bldg. I highly recommend this compressor but I could not give 5 stars, not knowing how well it will hold up (although it is not a concern).
Good Purchase - I also heard from Emglo which makes the unit for DeWalt. This is my first compressor purchase. DeWalt now offers a rebate ( $50.00 ) for this unit, but you have to also purchase a DeWalt nail gun. Come on DeWalt-how about $ 25.00 for the compressor purchase? I qualify for the rebate but not so keen on their guns, hence no $$$ back.
DeWalt D 55155 - I use my compressor for light work on my auto and boat. It runs my air tools very well. The compresser came with a defective copper air line, DeWalt shipped a new one and I installed it. I repaired the switch by properly tightening the screw around the gasket.

I use DeWalt and Makita tools; Makita products are better.
roofer wayne - I used many compressors in 28 years of roofing. This is my 3rd emglow and 2nd dewalt. My first dewalt is fine, I just needed another one because of expanding business. The only thing that was wrong with the first dewalt was the air regulator started leaking and had to be replaced. Other then that, it worked every day for two years so far,that with two or three roofing guns going which is like four framing guns and I did not notice it starving for air.This compressor is the best and durable for the Professional.
Dewalt and Emglo make a complete package, great compressor! - Someone decided they needed my trim compressor more then I did so I had to purchase another one. I must admit I was not to broken harted about it though because I have had my eye on Dewalt's new compressor now for some time. The sleek design, the way it protects its gauges, and its 2 quick conect air ports kept calling me every time I saw this compressor. I was not disapointed!! The unit is a little heavy for a portable compressor at over 60 lbs. Inside a house a compressor's noise can seem to be greatly magnified but this unit seems almost quiet, it runs so smooth. I had a larger compressor for framing but this Dewalt compressor has done so well that I have sold my larger one and rely on just this one. The unit really has no real flaws at all the air drain has a great little lever to drain the tank with, but it does blow out hard if you open it to quick and I am not convinced it drains all the condesation real well. There is a little black breaker on the compressor unit which can be a little dificult to locate and reset, it would be nice if on a newer version Dewalt would move it to the front with the gauges and quick connects. It has triped several time on us if we try and run too many things at a time such as a miter saw, table saw, and the compressor, but for normal use the draw of this compressor seems fine even on a 15amp breaker.
To sum it all up this is one really nice complete package compressor!! It is small enough for the little jobs yet tough enough for the more demanding jobs, within reason, remember it is only a 4 gallon, running at less the 15amp, compressor. With Dewalt and Emglo combine you will not go wrong buying this compressor, and unless you get a defective unit which happens with all products from time to time, you will have a compressor that should last a long time. Another great product from Dewalt thanks!! One last suggestion for Dewalt; (this unit is so great you might want to make an oiless version for people "like myself" who tend to be forgetful about stuff like, adding oil!!!).
Emglo (Dewalt) compressor - I have had this compressor for about 6 months or so. I got this compressor when i had to put baseboards and crown moldings in a house. I looked at both the Hitachi and Dewalt compressor for about 4 months before i got it. This compressor also has a roll cage to protect the motor that is nice and can come off easily to access the motor. Overall this Emglo I mean Dewalt works really well and I'm pleased with it.
Major quality control problems... - I have been using Dewalt products for a long time and have never had any problems -ever-. Naturally when it came time to get a new compressor, I decided to go for Dewalt as well.

Once the package arrived, the air filter was broken and the motor/compressor was not operating. To my surprise the second unit came with a broken air filter which completely boggles my mind as it is in a protected area and I can't see how this could be damaged during shipping. If it was the air filter only, I would have kept it, but the frame on this unit was completely twisted and the face place where the gages are on was completely warped out of shape.

I think I have had it with getting a Dewalt compressor.
dewalt has never let me down - most of my tools are dewalt including a assortment of nailers and this compressor.its great!!never short on air supply,even when framing.as for noise,air compressors make noise but this unit is not bad,its a lot nicer on the ears then my 30 gallon unit. the only thing that would make this unit more attractive would be wheels and a self-storing handle like porter cable offers on its single tank compressors,other then that i have no complants.
Thank you Saint Nick - This was a Christmas gift to myself, and well deserved I might add! Very portable and doesn't take up a lot of room in the shop.
A pleasure to own! -

The biggest complaint I have about other compressors is the portability of them. This helps to center the weight to my body and I can then lug the compressor up several flights of stairs without passing out.

The main reason I bought this unit over cheaper compressors was the recommendation to the brand names of DeWalt and Emglo. I now see why others recommend the Dewalt and Emglo brand.
NOT for everyone !! - Be realistic and really think about your needs in a compressor - because this one is meant for low-volume work.
Portable, the heft is managable for most tradesmen.

Factory set pressure valve set to kick on compressor at 100psi and turn off at 120psi - which means that any fair amount of use will cause this sucker to go on-off-on-off-on-off almost constantly!

Bottom Line: DO NOT get this if you need a generous supply of air (for blow nozzles, production cabinetry, house framing, paint sprayers, etc.)

Go ahead and get one if you need a portable, professional quality, low-volume air supply (for continuous finish nailing or occasional large gun use)

This would be the perfect tool for a handyman who needs occassional yet reliable air from house to house.
Great Performance - Originally bought Dewalt D55155 to replace CH 2hp 4gal sidestack. Dewalt/Emglo designed this compressor around portability.there is very little room in the opening to not only grasp and turn the valve, but if the valve is opened too quickly, be prepared for full discharge of air. Another design area that could use improvement is the location of the two pegs/studs for stowage of electrical cord in order to move compressor. With cord wrapped around the two pegs, natural movement of compressor is to roll it onto it's side in order to pickup and carry with one hand. When cord is stowed it extends outside the compressor's frame therefore, when compressor is rotated onto it's side the wrapped cord comes into contact with the ground resulting in compressor bearing it's weight on cord. Outside of two design improvements, air compressor is a great performer.
Just plain smart - It's more than powerful enough to run a framer all day, it's has a simple, easy design and most impressively it si the most easilly portable compressor for it's size I've ever toted up a flight of stairs.
A pleasure to use - Well, I managed to get the entire purchase price refunded, after two years of use, and immediately purchased the Dewalt 55155.
No bad feelings about P-C products, the pancake compressor just gave up the ghost early and had to be replaced with a more capable unit - so far the Dewalt seems like a super piece.
leaky air compressor - used this air comporessor to place 500 sq feet of floor and began to leak. had to bring it 3 times to the dewalt service center before they agree that it leaked.
Wonderful Product - First let me say that if it is Dewalt, I want it! I purchased this compressor to use to fix my roof after the hurricanes this year and to build my new house in a few months. And it puts out the air.
Good compressor - I have owned this compressor for 6 months now. This compressor has performed flawlessly. Recommend to anyone looking for reliable portable air that will last.
Great Unit - Im very impressed with this new dewalt compressor.I love the two hose ports espesially for finish work! I keep my finish nailer hooked up on one and the brad nailer on the other,no more switching guns on and off hoses! I highly recommend this heavy duty,easy to carry compressor!.
A very good compressor - I replaced my hotdog style oil-less compressor when the connecting rod decided to break.

While at the local hardware store I saw the DeWalt D55155 compressor and thought, "geez, you could not miss that compressor!" The bright yellow paint made this compressor stand out and then that's when I saw the name Emglo.

DeWalt and Emglo have a winner. This compressor also has a ball valve on the bottom of the tank for easy draining. This ball valave is also inside the frame as is every component of the compressor. It's mounted inside the roll cage near the copper line running from the compressor to the tank. It might be, but, I put the compressor away from where I'm working so this is not an issue.

As with any compressor you have to keep the extension cords short.

So, would I buy this compressor again if I had to? You bet!.
Good machine, but some packaging and assembly issues - To my dissatisfaction, it arrived with a broken air filter and some loose items rolling around in the air tank. No, it wasn't the air filter parts, it was something metalic actually inside the closed tank! Amazon referred me to DeWalt who referred me to my local service center. DeWalt was nice enough to agree to send a replacement filter, but I returned the unit to Amazon because of the loose items in the tank.

Thanks to Amazon's incredibly fast and hassle-free process for returns, I had my replacement compressor less than a week later. Unfortunately, it too had a broken air filter. But since everything else was fine, I bought a filter locally (DeWalt's replacement has yet to arrive) for $10 and kept the compressor. This was not in the first shipment and is REQUIRED before starting the unit which is something that as a first-time compressor buyer, I would not have known to do.

I recommend this machine but please check over your unit carefully when it arrives and call DeWalt's parts center to get a free replacement filter if that's all you find wrong.
DeWalt takes a classic to a new level - Last yearI spent many months researching a replacement for my ailing Campbell-Hausfeld oilless compressor. Originally I figured the CH had a higher air output, needed no oil changes,would work on slopes and start in cold weather.After forking over the big bucks and putting it to work for DeWalt's 30 Day trial period I couldn't believe I'd gone so long without this compressor.
1) First of all the Emglo name on the unit reassured me that I was getting a tool built by the industry leader with a great reputation for tough, dependable compressors. The first day on the job proved it with quick cycling times and ample air at all times. I do a lot of work in luxury high rises and I've often left the compressor at home rather than drag it down endless corridors. I've paid for the compressor already in labor savings by bringing it to every trim job. I've had othe craftsmen come over and ogle the compressor and ask questions about it, but mostly admiring it.

In short, this is a serious tool for the professional contractor with loads of power(delivered air), durability, great design and looks. DeWalt took a classic, the Emglo 790, and improved the power output layout and design. My only complaint is the air release lever, an otherwise solid unit mounted on the underside of the tank. The opening is too narrow for your hand and the sharp stream of air can actually cut your skin. In addition the compressor shoots out small chunks of ICE from the tank creating dangerous projectiles that will cut your hand or riccochet into your eye.
Finally, I have a compressor that won't roll around in the back of the truck knocking off gauges and connections as I drive through the city. Hats off to DeWalt and Emglo for a match that combines legendary durability with great design.
MOTION PICTURE IA - The only thing I can say is EMGLO! I have been using Emglo compressors for over 15 years years now in the Motion Picture Industry and on the outside and I never would settle for less. I was a little skeptical at first when I saw Dewalt and Emglo had merged to make a new line. I must say I prejudged and thought well there goes the dependability and quality of Emglo's Compressors.
Perfect compressor for small jobs - This compressor will fill all your needs for small jobs on the worksite. It is flawless for air tools that do not require a large continuous flow of high pressure air. I've used it with a dewalt finishing nailer, brad nailer, air blower, porter cable gravity feed spray gun, and husky cut off wheel. Heavy use of my 4" grinder will cause the motor to be on constantly and air pressure will drop too low to power the grinder at usable rpms.
Very Nice Unit - I had a Porter Cable pancake compressor and yes it did roll around in the back of my truck and had a real hard time maintaining pressure when under extreme load such as running my texture gun. I replaced the Porter Cable with the Dewalt and what a difference. It is a fairly hefty unit but it does carry nice due to it's shape.
it's too much! - This is a great compressor. I've one additional bad thing to say and that is that DeWalt could use some better paint to go with such a great looking compressor! there's already rust on my cylinder housing and I only purchased the unit a week ago! But overall, I would recommend it highly.
Major quality control and service issues - I am a contractor and have had this compressor for three years. This is the worst compressor I have ever owned. I should have just replaced the compressor for the headache it's been. I've called Dewalt to try to find out the problem and they seem to be totally clueless.

I love the idea Xantrex had for a portable electronic generator, however their execution came up a little short on this one.