Air Compressor Part Sullair - 1   2
2.5 HP 4 Gallon Oil-Lube Air Compressor | Porter-Cable CPLDC2541S
Porter-Cable CPLDC2541S
$369.99 >> $358.51
by Porter-Cable

Three year limited warranty
Complete with high-flow regulator and quick-connect, pressure gauge and tank gauge
Patent pending oil-lube system with ball bearing design
Direct drive, no belts or adjustments are necessary
2.5 HP, 4.3-gallon oil-lube compressor

found in CPLDC2541S's description: From the Manufacturer
Porter-Cable is proud to introduce our first oil-lube compressor. When we first put our engineers on the task of designing an oil-lube compressor we gave them one priority; it could not have the same imported pump as all the other major brands have. Just as in a car, the lubrication system in the pump is the most vital part in a compressor. That is why this unit was designed with a patent pending oil slinger design as an integral part of the crankshaft that continues to lubricate the piston in any angle. The design features don't stop there; it boasts a cast-iron cylinder, stainless steel Swedish valves, and an automotive type paper filter to trap unwanted particles before they enter the system. Now, take this revolutionary pump engineered to last over 3,000 hours of use and add in the "High Pressure Technology" and you have compressor that will run at 150 pounds per square inch (PSI).5 horsepower induction motor is safely shrouded and acts as a wind tunnel providing more than enough air to cool the unit down even under the most strenuous conditions.3 HP Running
  • Patented oil lubrication system allows pump to be operated on an uneven surface
  • Universal, High-FloSM, push-to-connect coupler in air outlet
  • 150 PSI tank pressure, equivalent to a 7.3 gallon tank at 125 PSI, for 71% more stored work capacity
  • 83 Dba
  • Higher 120 PSI cut-in pressure assures nails will be completely driven in before pump cycles on
  • Two pole, 3,450 RPM capacitor start induction motor for maximum air delivery
  • High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
  • Low 12 Amp motor draw prevents accidental tripping of circuit breakers
  • 4 gallon storage capacity air tank supports heavy usage of stapler, brad, finish, roofing and framing nailer
  • Heavy duty cast iron cylinder construction and large 8 oz. oil capacity to assure long life
  • Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, oil, and operating manual

    SPECIFICATIONS

    • Lubrication: Oil Lube
    • Gauges: 2
    • Quick Couple: 1/4" NPT
    • Weight (Lbs. PSI: 150
    • SCFM Air Delivery @40 PSI: 5.4
    • SCFM Air Delivery @90 PSI: 4.
  • 2.5 HP 4 Gallon Oil-Lube Air Compressor | Porter-Cable CPLDC2540S
    Porter-Cable CPLDC2540S
    $580.00
    by Porter-Cable

    Three year limited warranty
    Full roll cage with high flow regulator and dual quick-connects
    Patent pending oil-lube system with ball bearing design
    Direct drive, no belts or adjustments are necessary
    2.5 HP, 4.3-gallon oil-lube compressor

    found in CPLDC2540S's description: From the Manufacturer
    Porter-Cable is proud to introduce our first oil-lube compressor. When we first put our engineers on the task of designing an oil-lube compressor we gave them one priority; it could not have the same imported pump as all the other major brands have. Just as in a car, the lubrication system in the pump is the most vital part in a compressor. That is why this unit was designed with a patent pending oil slinger design as an integral part of the crankshaft that continues to lubricate the piston in any angle. The design features don't stop there; it boasts a cast-iron cylinder, stainless steel Swedish valves, and an automotive type paper filter to trap unwanted particles before they enter the system. Now, take this revolutionary pump engineered for maximum durability and life, and add in the "High Pressure Technology" and you have compressor that will run at 150 pounds per square inch (PSI).5 horsepower induction motor is safely shrouded and acts as a wind tunnel providing more than enough air to cool the unit down even under the most strenuous conditions. oil capacity to assure long life
  • Patented oil lubrication system allows pump to be operated on an uneven surface
  • Protected panel includes two universal High-FloSM push-to-connect couplers and larger, easy to read regulated air pressure gauge
  • 150 PSI tank pressure, equivalent to a 7.3 gallon tank at 125 PSI, for 71% more stored work capacity
  • 83 Dba
  • Higher 120 PSI cut-in pressure assures nails will be completely driven in before pump cycles on
  • Two pole, 3,450 RPM capacitor start induction motor for maximum air delivery
  • High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
  • Specially designed protective transport handles
  • Low 12 Amp motor draw prevents accidental tripping of circuit breakers
  • 4 gallon storage capacity air tank supports heavy usage of stapler, brad, finish, roofing and framing nailer
  • Standard Equipment: Compressor, ASME safety valve, air regulator and gauge, 1/4" quick coupler, oil, and operating manual

    SPECIFICATIONS

    • Lubrication: Oil Lube
    • Gauges: 2
    • Quick Couple: 1/4" NPT
    • Weight (Lbs. PSI: 150
    • SCFM Air Delivery @40 PSI: 5.4
    • SCFM Air Delivery @90 PSI: 4.
      found in CPLDC2540S's reviews:
      A- compressor except for the regulator - I've been searching for a portable compressor for a couple of months now and near the end came up with three to chose from: the Emglo 55155, a Hitachi dual stack and this PC. Other compressors did meet these, but what draw me was the oil lube system that permits you to use it on uneven surfaces.5max) to not trip the circuit breakers, filtered intake (not output though) for longer motor life, shrouded motor for airflow from fan and good manual. The small metal cup also bit part of the plastic grommet retainer. The only thing I added at the universal coupler end is a water/air filter.
  • The Hotdog 12.4 Amp 2 Horsepower 2-1/2 Gallon Oiled Single Hotdog Compressor | Makita MAC700
    Makita MAC700
    $288.00 >> $176.40
    by Makita

    18 by 10 by 22 inches; 52 pounds; 1-year warranty
    1/4-inch brass Makita universal coupler
    Cast-iron pump and roll cage construction
    3.3 cfm delivered at 90 psi; low 1,720 rpm extends motor life and lowers noise
    12.4 amp, 2-horsepower, 2-1/2-gallon oiled single hot dog compressor with handle

    found in MAC700's description: From the Manufacturer
    The new MAC700 - Hotdog compressor by Makita is blowing away the competition with built-in features such as a super quiet motor that draws only 12.0HP AIR COMPRESSOR 12. hot dog tank Low amp draw & oil lubricated Roll-bar handle Industrial air filter & cast iron cylinder Oil sight glass & lever handle ball valve Built-in thermal overload for motor protection MAC700 2HP AIR COMPRESSOR.
    found in MAC700's reviews:
    Great compressor - This is a great little compressor with good output for the price.
    Mine arrived with a broken part which was no fault of the manufacturer, but they prompted sent me a replacement part without a problem.

    Great Product - shipping bad - Our box was clearly tossed around or banged into during shippment which broke off the air filter assembly that screws into the cylinder head. To avoid the HUGE hassle of returning/shipping the compressor to Amazon, incurring shipping charges that were initially free when I ordered the compressor, lugging it back to UPS, and waiting for who knows how long for a replacement, I contacted Mikita and got a replacement part directly from them. The part was provided free for pick-up and was offered under warranty.
    An Airbrushing Powerhouse -

    I use it to power airbrushes along with an added-on airbrush regulator/gauge/moisture trap. This is exactly what I wanted for airbrushing. It has a much longer lifespan than "airbrush compressors". The airbrushes work consistently all throughout the refill phase. This is the muscle car of airbrush compressors even though it was made in Taiwan. 5 to 10 minutes of airbrushing in silence, and when it comes on it does have some volume, but it is so much less noise than an oilless.

    I had to tighten down the crankcase cover (Ref# 29, Part# 304013-E) because it was leaking oil. It's the large exposed part of the motor that you can easily reach and tighten up with a screwdriver.

    Always damaged - I had the compressor sent out two times, both times, it arrived damaged.

    The compressor looked great, felt great, only wish Makita would have packaged it with more padding. I called Makita and they wouldn't send me the broken part unless I went to one of their distributors, and my nearest one is 40 minutes away. Amazon has been great about both returns, but they won't send me a third compressor.

    Great little compressor - Be sure to fill with oil and install the air filter before starting. It required drilling out the check valve, retapping the threads, buying an equivalent part at the hardware store, and reinstalling. Serious PITA, but cost was minimal and repair works fine.

    All in all, a great little compressor, and the best choice if noise is a concern.

    Great little compressor - I have had this compressor for a couple of weeks now and really like it. I chose this model over the very popular oil-free pancake compressors mainly for it's compact size and low noise level.

    The unit is compact, but much heavier duty than similar Cr*ftman compressors I saw at Sears. I did have a problem where the plastic oil filler cap was cracked, but Makita quickly sent me a replacement part under warantee. I would recommend this unit to anyone looking for an occasional use compressor and does not want something large or loud.
    Recieved damaged, Makita service hopeless - Just received this compressor from Amazon/ToolKing.
    Called Makita to see if I could get the part under Warranty.
    Makita has a problem in the packing of these compressor's which leaves the valve exposed to being crushed inside the container.If you need to put the compressor into service right away, I suggest buying local or
    unfortunately another mfg.The compressor is quiet, and seems to
    run ok, I have only done the initial start up though.Seems to be a great little compressor.(supervisor)The compressor has been in service now for around 8mo.I did solder a new elbow onto a lower area of the check valve which works out better when the compressor rolls on its side.

    13 Amp 2-1/2 Horsepower 4 Gallon Oiled Twin Hot Dog Compressor | Makita MAC2400
    Makita MAC2400
    $460.00 >> $249.00
    by Makita

    19-3/8 by 18 by 18-3/4 inches; 77 pounds; 1-year warranty
    1/4-inch brass Makita universal coupler
    Cast-iron pump and roll cage construction
    4.2 cfm delivered at 90 psi; low 1,720 rpm extends motor life and lowers noise
    13 amp, 2-1/2-horsepower, 4-gallon oiled twin hot dog compressor with handle

    found in MAC2400's description: From the Manufacturer
    The new MAC2400 - Twin Stack air compressor by Makita is blowing away the competition.3 amps to operate, a lower 1720 RPM rating and a heavy duty Intake Air Filter system like no other, its easy to see how this unit will out last and outperform everyone else. Large automotive style industrial air filter for increased air intake and greater efficiency.
    found in MAC2400's reviews:
    I'll let you know when I get a chance to use it! - After reading 45 reviews, most of which described the unit arriving damaged in one way or another, it would have been wise on my part to find a source for this compressor where I could pick it up.
    The other Reviews are Correct, this is a great compressor - This is a quality compressor. The weight comes from steel, not plastic parts.

    The compressor is just as quiet as others report.

    Why did I get this compressor? In sum, (1) I wanted a GOOD quality tool that was not Chineese junk, (2) I wanted at least 4 cfm for tools and (2) I did not want to spend a fortune. There seems to be several classes or levels of compressor in the lower price range. Unless you are getting a specialized mini-compressor just for a small brad gun, the $125-175 compressors are mostly junk: loud and rough. This Makita is in the next step up, with compressors in the $225 to 325 range. Most of this second tier are either made for just for job sites or are just bigger cheaply made compressors. The Dewalt is an excellent compressor, but you cannot use it next to you in an exclosed shop -- its too loud. It is a very well made little compressor.

    The compressor seems to live up to its specs. When I went to use a Snap-On 7200 3/8" air ratchet, the performance was just adequate.

    I have not owned a compressor is many years. But for a serious homeowner that appreciates quality tools and needs a general purpose compressor, I believe I found the perfect compressor.

    Lastly, no shop came close to Amazon on total price, in large part due to the free shipping.

    Decent compressor if you can get one without damage - I researched portable compressors for months before deciding on the MAC2400. Even with weight I was quite pleased with the compressor but my buying experience was much less.
    My first compressor from Amazon had a broken plastic motor cover which wasn't caused by shipping damage.
    I sent it back and Amazon had a replacement back to me in 3-4 days, Quick!, but that compressor also was damaged. The air cleaner housing was thrown on top of the compressor and beat up the control panel and one gauge from bouncing around. I was told to contact Amazon and after a week of waiting on Amazon, I was told that they could not send part (it would void warranty if replaced) and they were not going to send a replacement compressor. I packaged up the second compressor and sent back. I wasn't going to order another brand compressor from Amazon as I didn't want the hassle if damaged again. looking at Ridgid as I really didn't want a Dewalt or the Porter Cable pancake compressor which they carried. I bought a Ridgid model with a higher cfm rating, larger air tanks, wheels, handle and it came out of box without a scratch. After moving it around the house and up the stairs, I don't know how long I would have enjoyed carrying the MAC2400 or any other brand compressor that weighs 70-80lbs.

    Overall the MAC2400 looked and sounded like a good compressor for the short time I had it but makes me wonder how well they are built, with so many problems between packaging and broken parts inside cartons not caused by shipping damage on the Mac700's and a few of these. If you are not in a hurry for a compressor and/or don't care about cosmetic condtion out of the box (if damaged) then Amazon is the place to buy with their best price. I you need one right away and are particular about quality, I would seriously look elsewhere to purchase.

    / FP18KIT 18-Gauge Brad Nailer Compressor Combo Kit | Senco PC0947
    Senco PC0947
    $249.00 >> $197.00
    by Senco

    1-year warranty on nailer; 90-day warranty on compressor
    Includes nailer, 1/4-inch -by-25-foot hose, safety glasses, fittings, oil, 1,200 brad nails, wrenches, and manuals
    Compressor: 1 horsepower, 2-1/2 gallons; aluminum cylinder with steel sleeve; 20 pounds
    Nailer: adjustable depth of drive, rear exhaust, easy-open latch, no-mar pad, low-load indicator
    18-gauge brad nailer and 1-gallon compressor combo kit

    found in PC0947's description:

    FinishPro 18 FEATURES

    • Extra power — Drives fasteners up to 2" in hard wood applications
    • Belt hook — For convenience
    • Adjustable depth-of-drive
    • Rear exhaust — Keeps oil and dust away from work surface
    • Easy-open latch — For quick and comfortable loading
    • Hardened steel driver — For extended life
    • Full soft grip — For comfort and control
    • Low load indicator — Visible fastener indication
    • No-mar pad — To protect work materials
    • One-year warranty
    • Includes case, fitting, oil, hex wrench and fastener rebate

    Projects
    Baseboard,cabinets, casebacks, chair rail, finish and trim, furniture frames, furniture trim, mirror and picture frames, trim

    FinishPro 18 SPECIFICATIONS

    • Power (in/lbs): 168
    • Height: 9.3 bar)
    • Mode of Operation: Restrictive Trigger

    Fastener Types

    • Gauge: 18
    • Fastener Range: 5/8"—2"
    • Finish: Galvanized

    What's in the Box
    This kit comes complete with the FinishPro 18 brad nailer, a Senco 1/2 hp (1 hp peak), 1-gallon compressor, 1/4-by-25-foot coil hose, safety glasses, fittings, tool oil, variety pack of 1,200 brad nails, tool wrenches and manuals.

    Product Description
    Finish Pro 18 Combo Kit, Perfect For Woodworkers & Punch List Contractor, Kit Includes, Lightweight Oilless, 1HP Compressor, Finish Pro 18 Brad Nailer 5/8" To 2", Hose, Fittings, Sample Pack Of Brads, Safety Glasses & Bottle Of Oil.
    found in PC0947's reviews:
    compressor try's hard but comes up a bit short -
    Of course it was the compressor which broke, the part with the 90 day warranty.
    Senco is a good company, but I think this little compressor is not quite up to the quality of their other products.
    In my case it was the 1/4" copper tubing which brings the air to the tank that failed.
    I have fixed it with some liquid steel, since I'm on a job with it, I'm hoping the repair lasts till I have time to replace to tubing.
    I have used this to build two large bookcase and cabinet projects so far, and in doing so I have learned the compressors limitations. I bought this combo for the light weight
    of the compressor, so I guess there must be some compromises. This won't take the place of more powerful compressors,
    but it is great for carrying to and from a job. I'm not sure I would
    recommend this product, the 90 day warranty on the compressor is a big negative.

    15 Amp 2 Horsepower 6-Gallon Oil-Free Pancake Compressor | Porter-Cable CPFAC2600P
    Porter-Cable CPFAC2600P
    $316.16 >> $167.00
    by Porter-Cable

    32 pounds; 1-year warranty
    Includes compressor, ASME safety valve, regulator, gauges, 1/4-inch quick coupler, manual
    Cast-iron construction
    Provides 3.7 cfm at 40 psi and 2.6 cfm at 90 psi; air-regulator and quick-connect coupler
    15 amp, 2-horsepower, 6-gallon oil-free pancake compressor; handle; built-in thermal overload protector

    found in CPFAC2600P's description: com Review
    This Porter-Cable 2-horsepower, 6-gallon pancake compressor transports easily but has plenty of capacity and power--enough to support heavy use of brad and finish nailers and moderate use of framing nailers. Features include a high-flow regulator, an easy-to-read air pressure gauge, automatic thermal overload protection, an industrial-style quick-connect body in the air outlet, and a long-life motor with replaceable brushes. The compressor weighs 32 pounds and has a handle built into the motor housing, so it's relatively portable. This Porter-Cable is as convenient and easy to use as any compressor out there, and it's just about ideal for brad and finish nailers that are being used inside people's homes on a regular basis. --Jonathon Tudor

    From the Manufacturer
    This oil-free 2-hp pancake-style air compressor has a new high pressure design that provides 28-percent more usable air! This allows more run time and less down time. The high-flow regulator keeps the tank pressure between 120 PSI and 150 PSI, allowing a greater reserve air capacity. Lightweight for portability, this compressor has plenty of power to fire all brad and finishing nailers as well as moderate usage of roofing and framing nailers. Includes compressor, high flow air regulator and gauges, quick coupler, and instruction manual.8 HP Running
  • Built-in automatic thermal overload protection
  • Larger Easy to read regulated air pressure gauge
  • Universal, High-FloSM, push-to-connect coupler in air outlet
  • One year warranty
  • 150 PSI - 10 gallon equivalent tank size as compared to conventional 125 PSI model
  • 87 Dba
  • Oil-free pump design for durability and no maintenance
  • Long-life motor with replaceable brushes
  • High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
  • 6 gallon tank supports heavy usage of stapler, brad and finish nailer, standard-to-heavy roofing and standard framing nailer
  • 120 Volt, universal motor starts easily under low voltage conditions
  • Extension cord use without tripping circuit breakers
  • Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual

    SPECIFICATIONS

    • Lubrication: Oil Free
    • Gauges: 2
    • Quick Couple: 1/4" NPT
    • Weight (Lbs. PSI: 150
    • SCFM Air Delivery @40 PSI: 3.7
    • SCFM Air Delivery @90 PSI: 2.

      Product Description
      2 HP, 6 Gallon, Oil-Free Pancake Air Compressor, 150 PSI Maximum Tank Pressure, 3.6 SCFM @ 90 PSI 87 DBA, 15 AMPS, Built-In Thermal Over Load Protection, Hi-Flo Air Regulator With Quick-Connect Coupler, Regulated Pressure Gauges, Includes ASME Safety Valve, 1 Year Warranty.
      found in CPFAC2600P's reviews:
      What you see is Not what you Get! - )part# D20668.
      Once pneumatic, you never go back - The Porter-Cable 2HP 6-gallon pancake compressor is a reasonably powerful and reasonably portable air compressor. I only recently purchased one but I am already sold on pneumatic tools, which the PC 6-gallon compressor operates surprisingly well. Although many pneumatic tools, such as air hammers, drills, and sanders, consume quite a bit of air (generally in the neighborhood of 5 CFM at 90 PSI), I have found that my PC compressor does just fine with its modest 2. My one complaint is that the motor and compressor are a bit louder than I expected. Then again, the noise of the compressor is hardly noticeable above the din of an air hammer, so I'm not sure it really matters.

      If you enjoy using power tools and you have not yet experienced the pleasures of pneumatic gizmos, you should consider purchasing a small but serious compressor like the PC 2HP 6-gallon pancake. It's truly amazing how versatile compressed air is; basically any tool that runs on electricity also comes in a pneumatic version (well, except for arc welders). And, in my admittedly novice opinion, the pneumatic versions have many advantages; they are more durable (with surprisingly few moving parts), often cheaper, and usually more powerful than their electric counterparts. It makes so much sense to have all your tools share one powerful motor instead of replicating motors endlessly; that is, if you can part with your cordless tools.

      But be warned! If you take the plunge into pneumatic tools, there is an endless stream of items you will find yourself purchasing: air tool lubricants and cleaning kits, in-line oilers, air hoses and gauges, quick connectors, air filters, oil-water separators, Teflon tape, universal air hose joints, air manifolds, blowguns with assorted nozzles, etc.)

      One odd thing I've noticed is that the PC 6-gallon compressor is virtually identical to the Craftsman 6-gallon compressor, right down to the paint job.

  • Job Boss 15 Amp 3.5 Horsepower 4-1/2 Gallon Oil-Free Wheeled Single Hot Dog Compr | Porter-Cable C3151
    Porter Cable C3151
    $534.56
    by Porter Cable

    85 pounds; 1-year warranty
    Includes compressor, mobility kit, and manual
    Cast-iron construction
    2-port removable console for remote air regulation; full roll cage to protect kit; 150 max psi
    15 amp, 3-1/2-horsepower, 4-1/2-gallon oil-free wheeled single hot dog compressor with handle

    found in C3151's description: com
    Porter-Cable’s solved the compressor mobility problem on two levels with this tool. First, and most impressively, it’s got a two-port removable console for remote air regulation and higher air pressure right where you’re working. And the compressor itself has wheels and an extension handle, making life easier on you.

    Let’s face it: This compressor’s big, heavy and loud, with a max psi of 150. You can run three or four guns at once off it with a splitter and have no air supply problems whatsoever.5 gallon, oil-free contractor style compressor is packed with features. The high-flow air regulator and two-port removable console are winning combinations for contractors. Having the ability to remove the console gives the user the opportunity to remote air regulation and gain higher air pressure closer to the job site. Air delivery at 40 PSI: 7.

    What's in the Box
    C3151 Job Boss Compressor, mobility kit, manual.5 gallon, oil-free contractor style compressor is packed with features. The High-flo air regulator and 2-port removable console are winning combinations for contractors. Having the ability to remove the console gives the user the opportunity to remote air regulation and gain higher air pressure closer to the job site.

    Product Description
    Includes Compressor, Mobility kit, ASME safety valve, Operating manual, Limited one-year warranty.
    found in C3151's reviews:
    Used it today for the first time - I install windows as part of my job. I use an air hammer to break out the old windows and they require a lot of air. This compressor worked well with some catch up time but hey, it's only a 4 1/2 gallon tank. Cord wrap is fairly useless, handle makes it portable, regulator worked, switch and air release are protected.
    Dependable and... dependable -
    I've been using this compressor for about 3 months now. Nailing, stapling, and air cleaning.
    The pressure, for the most part, maintains its equillibrium. What I don't particularly care for about the unit is the airflow adjustment valve. and I don't trust it for the compressor's duraction.

    05 update: I noticed one reviewer griped about this tank's compressor turning on frequently while using an air wratchet or something. that's an unfair assessment. Using such tools would cause the same reaction on any tank with the same air gallon capacity.

    6 Amp 3/4 Horsepower 2 Gallon Oil-Free Hot Dog Compressor | Thomas Compressors T-635HD
    Thomas Compressors T-635HD
    $369.00 >> $279.00
    by Thomas Compressors

    Long life, contractor quality machine - rated for continuous use
    Low amp draw - works on 15 amp circuits and with extension cords
    Versatile - offers framing, roofing or finish gun capability
    3/4 Horsepower - delivers 1.7 cfm at 100 psi.
    Lightweight and portable, only 26 pounds

    found in T-635HD's description: From the Manufacturer
    Thomas Industries T-635HD is a quiet running (69-decibel) 3/4 HP compressor that is both portable and versatile. Other uses include, tire inflating, painting, airbrushing, small air tools, and winterizing water lines and RV's.
    found in T-635HD's reviews:
    kinda load - Thomas has good tech support - Received as expected, actually a day early thanks Amazon, the compressor is very well packed for shipping.5 hours, it will not hold air.
    I'm now trying to get a reply from Thomas on where to take it or send it back for repair,I would like to resolve this as the compresser is a great size for one gun use.
    Thomas Tech did return my call - worked with me on phone to try & fix problem, he overnighted the replacement part and upon installation everything is up & running - good tec support, this has caused it to quiet a little.

    18 Gauge Brad Nailer 2 Horsepower Compressor Combo Kit | DeWalt Heavy Duty D55151BN
    DeWalt D55151BN
    $422.00 >> $249.99
    by DeWalt

    Heavy Duty Electric 4 Gallon Twin Stack Air Compressor, High performance direct drive oil lubricated pump, 3.2 cfm @ 100 PSI, 120V,

    found in D55151BN's description: From the Manufacturer
    This first-ever DeWalt 2 Brad Nailer/Compressor Combo Kit (D55151BN) simplifies the purchasing process a providing a cost effective tool package that delivers maximum power and versatility on the jobsite.1 HP Continuous) 4 gallon oil lube side stack compressor (D55151), a 25 ft. vinyl air hose, fittings and pipe joint tape. A tool-free, 360 degree adjustable exhaust setting helps to channel air exhaust away from the user, creating a safe and comfortable working environment. The D55151 electric compressor is equipped with a 1. The compressor is designed with a durable cast iron cylinder, providing increased pump life. Designed to be sturdy yet lightweight, the compressor weighs only 53.
    found in D55151BN's reviews:
    Problem with Amazon - I am writing not to rate the compressor but to tell everybody what happened to me. I placed an order for this compressor and an air house that was free. I found out that UPS returned the item back to the manufacturer (damaged item - reason given) they issued me an instant credit, and I am left with an air house and air chuck (part of the order that was delivered) and NO compressor. The air house was supposed to be free but it is not, I got charged 34$ because I did not buy any compressor.
    15 Amp 2-1/2 Horsepower 8 Gallon Oiled Wheeled Single Hot Dog Compressor | Campbell Hausfeld HL5501
    Campbell Hausfeld HL5501
    $169.00 >> $169.99
    by Campbell Hausfeld

    Delivers 4 avg scfm @ 90 psi
    Wheels and handle for easy portability
    Oil-lubricated cast iron cylinder pump for long lasting, reliable performance
    Large, 8-gallon tank for extra storage

    found in HL5501's description: com
    An air compressor isn't one of those must-have tools for the homeowner—-that is, until you've used one. The HL5501 has plenty of power for a stapler or nailer; imagine how quickly a chair rail could go up. Because it's a smaller unit, its air delivery is lower, so make sure you check the air requirements of the tools you intend to use it with.--Kris Jensen-Van Heste

    From the Manufacturer
    Ideal for inflating balls and tires, nailing fences, stapling protective wrap, and more, this 8-gallon air compressor offers a whole new world of around-the-house convenience. A handle and wheels make this compressor highly portable for doing jobs in the basement, on the roof, and in the yard. You'll get those occasional home repair jobs done more quickly and with less expensive with this Campbell Hausfeld compressor and air tools.

    Compared to electric power tools, Campbell Hausfeld air tools save you both time and money. The initial cost of an air tool is significantly lower than its electrically powered counterpart, and the average life is longer. Air tools also deliver more torque and higher revolutions-per-minute than electric tools, helping you complete your jobs more quickly and effectively.

    FEATURES

    • Large, 8-gallon tank for extra storage
    • Oil-lubricated cast iron cylinder pump for long lasting, reliable performance
    • Wheels and handle for easy portability
    • Delivers 4 avg scfm @ 90 psi

    SPECIFICATIONS

    • Delivers 4 avg scfm @ 90 psi



    Product Description
    8 Gallon, 15A Cast Iron Air Compressor, Oil Lube Pump With 2.
    found in HL5501's reviews:
    Sturdy, portable, cheap oil-lubricated compressor... But noisy! -

    Let me start by saying that I can't live without an air compressor. Those of you who don't have one have no idea how much you'll use it and what an integral part of any household project or repair it will become when you finally have one. That being said, let me explain why I bought this particular compressor and what I think about it thus far.

    Until recently, I had an 8-gallon oil-free compressor that was handed down to me from my dad after I bought him a large stationary garage unit about 6 years ago. This thing lasted about 13 years with very regular use with a few repairs over the years. This is absolutely unheard of with an oil-free compressor. In order to replace the blue tarp roof provided by FEMA with some actual shingles, I will need a compressor to power my roofing and framing nailers. Portability and reliability are important factors in order to assist with the reconstruction efforts of the community once the repairs to my home are complete. This is why I decided on an oil-lubricated compressor. Although I had great success with the aforementioned oil-free compressor, I do understand that this was more the exception than the rule. It is hard to find an oil-lubed compressor that is both portable and affordable., making them very difficult to get in and out of your truck/car by yourself, let alone getting them up a flight of stairs. Also, the plastic shroud that covers the motor/pump is slightly cracked because it contacts a part underneath it. This compressor does not come with oil, even though the instruction manual says "only use the oil that was shipped with the compressor." The other thing that you will run into is that it does not come with a coupler to connect an air hose to. Although this is very common for air tools not to come with the required fittings to connect it to a hose, there is one difference here. I have never seen a quick-disconnect air hose connector (the hose end that has the sleeve to release the connection) with male threads on it. (a brass pipe nipple for you plumbers out there)

    Use:
    The Campbell Hausfeld HL5501 overall seems to be a very good compressor. If you are looking into this compressor because of the reduced noise level that oil-lubed compressors are known for, then you will be disappointed. This compressor is every bit as loud as any comparable oil-free unit.

    Conclusion:
    I would recommend this compressor to the handy home user that wants the reliability and longevity of an oil-lube compressor, but doesn't want to spend a lot of money. I would not recommend this compressor if the noise level is a big issue, but be prepared to spend a lot more money for a belt-driven unit.

    Air Compressor Part Sullair - 1   2

    Porter-Cable (27)
    Campbell Hausfeld (18)
    DeWalt (14)
    Emglo (10)
    Thomas Compressors (9)
    Bostitch (9)
    Makita (6)
    Hitachi (5)
    Porter Cable (4)
    Grip Rite (3)
    GRIP-RITE (2)
    Palmgren (2)
    Wagan (1)
    Stanley Hand Tools (1)
    AccuSet (1)
    Q Industries (1)
    Senco (1)
    Xantrex Technologies (1)
    Black & Decker (1)
    Ingersoll Rand (1)

    Other Searches:

    Sullair Air Compressor Part
    Air Compressor Part Sullair
    Sullair Compressor Part
    Sullair Air Compressors
    Sullair Compressors
    Compressor Diagram Sullair
    Air Compressor Part
    Old Air Compressor Part
    Air Compressor Part Used
    Gas Air Compressor Part
    ©2006