86 pounds; 2-year limited warranty Includes compressor, mobility kit, ASME safety valve, manual Cast-iron construction 12 amps; 150 psi, enough to operate 2 nailers at once; roll bar to protect motor and pump 2-1/2-horsepower 4-1/2-gallon oiled wheeled single hot dog compressor
found in C3551's description: The oil-lube design is a plus in our book because it'll run quieter and last longer than oil-free models. If you're a contractor looking for the right compressor, you've found it.--Kris Jensen-Van Heste
From the Manufacturer
Why lift when you can roll? The Job Boss Compressor comes equipped with a mobility kit for job site portability.5 gallon, Oil-Lube contractor style compressor is packed with features youll like. A cast iron oil-lube design and 8 oz. oil capacity mean increased durability and a longer lasting machine that wont let you down. The High-flo air regulator and 2-port removable console are winning combinations for contractors looking for performance and versatility. This compressor is designed with a removable console for maximum mobility and air pressure.5 HP single tank aircompressor
Oil-lube aircompressor for maximum durability
150-PSI tank pressure for longer tool run time,
Quieter motor is easy on eardrums
120 V/ 60 hertz/1 phase motor
Two pole, 3450-RPM capacitor start induction motor for maximum air delivery
Includes 1-year limited warranty on parts and accessories
SPECIFICATIONS
150-PSI tank
3450-RPM capacitor start induction motor
8 oz. oil capacity
Product Description
The Job Boss Compressor comes equipped with a mobility kit for job site portability.5 gallon, Oil-Lube contractor style compressor is packed with features youll like. A cast iron oil-lube design and 8 oz. oil capacity mean increased durability and a longer lasting machine that wont let you down. The High-flow air regulator and 2-port removable console are winning combinations for contractors looking for performance and versatility.5 gallon, mobile, contractor-style, single tank aircompressor. Patented oil lubrication system allows pump to be operated on an uneven surface and assures long life. 2-port removable console to allow remote air regulation and higher pressure closer to the job site.5 gallon storage capacity air tank supports heavy use of brad nailers, staplers, and finish nailers; moderate use of roofing and framing nailers.5 gallon 150 PSI portable aircompressor, Mobility kit, ASME safety valve, and Operator manual.
found in C3551's reviews: Everything it promises and more.......... - All I can say is there are a LOT of portable aircompressors out there and a lot of them are junk. I did not use the oil that came with compressor though, I decided to run a fully syntheticoil (make sure it is a compressoroil) Ingersoll Rand makes a very high quailty oil for this compressor. Everything is where it should be on this compressor: knobs, gauges,ect. The only thing I would tell someone interested in this compressor is don't be fooled by Porter Cables "oil-free" version of this compressor, I have done a lot of comparision shopping not only is the oil free version much noiser but you will be servicing it much more often than the oil-lube pump. Lowe's sells the "oil-free" version of this compressor for 299.00!!!!!!!! You can purchase this compressor, tax free and shipped free and it will be shipped right to your front door! What a deal! Good job Amazon!.
Fully enclosed protective belt guard with "Directed" cooling fan. 5 HP Peak motor provides significant air flow. Operates on 120/240 volt service. Pre-wired for 120V. Unique product design from the largest manufacturer of reliable and durable, single stage CAST IRON pumps in the USA 20 Gallon ASME code tank for tough jobs. Rugged Cast Iron two cylinder pump provides up to 5,000 hours of extended life. Oil-Lubricated pump has a traditional design that is quieter and longer lasting.
found in VT6290's description:From the Manufacturer
The VT6290, 2 Running HP, wired for household current delivers enough air power to tackle tough jobs. The twin cylinder, oil lubricated, cast iron single stage pump runs quieter - so the compressor can be used in the same area that the work is taking place. Solid cast iron units are up to 35% quieter than aluminum units with cast iron cylinder sleeves, and dramatically quieter than direct drive aluminum compressors. These compressors are made in the US with a 3 year warranty.
Product Description
mfr: Campbell Hausfeld Air Products Campbell Hausfeld is a recognized leader in the home improvement and automotive industry.
SINGLE STAGE AIRCOMPRESSOR. Single Stage Cast Iron Compressor5 HP Peak, 20 Gallon.
found in VT6290's reviews: VT6290 and FedEx - The box was busted on one side causing some of the content to spill outside (a tire and air filter). On top of that, FedEx delivered the box upside down, causing the discharge tube to bend, the air filter to separate from the pump, a busted pressure gauge and a bent handle bar.
So I filled the ugly duckling with oil, did the 30 minute pump break in, and it worked very well. The compressor DOES NOT include oil. It takes 12 ounces of Mobil 1 10W-30 Syntheticoil. The air filter supplied causes the compressor to be kind of noisy.
Except for the awful FedEx delivery, I am happy with the compressor. Free delivery, free air hose, no tax, and 10% off. Might work if received undamaged.......and with oil...and a few fixes - The shipping box is flimsy and cannot adequately support nor protect the compressor and parts. Mine arrived with a broken regulator, pressure gauge and air-filter assembly all of which apparently snapped off during shipment with no visible exterior box damage.
As the other reviewer also mentioned the compressor does NOT come with oil so be sure to have SAE30 air-compressoroil ready when it arrives. The manual does indicate the usage of Mobil 1 synthetic 10W-30 too. Also, you will need to provide your choice of air outlet connector.
If it wasn't for the bad shipment packaging I'd say initially that the compressor is a good buy but if Campbell Hausfeld has so little regard to protecting their product in shipment to you I question the integrity of the machine itself.
UPDATE 7/15: I am updating this review a full day after receiving and can add more to the trials and tribulations of purchasing a C-H compressor. The oil was another $3 (buy two pints as you need to replace the oil after 1 hour use). The air filter assembly is currently taped but working until I can get a replacment. All in all if you include travel time to Home Depot nearly 2-1/2 hours were spent just getting the compressor to work only to discover that there is a leak at weld where the pump mount attaches to the tank.) if using an extension cable as this compressor does draw a load when starting.
IMHO I wouldn't order a product like this if you need it for an immediate job as it will take to either repair yourself or to return and await a replacement. I needed this compressor to replace my dead one and ordered it to coincide with my time at home as I could not expect my wife to unload it.
Delivers 4 avg scfm @ 90 psi Delivers 4 avg scfm @ 90 psi for medium duty pneumatic tools Crankcase design is up to 25 percent larger than competitive models for improved performance and less oil carryover Cast iron oil-lubricated pump for long lasting, reliable performance 4-gallon twin stack tank design for portability
found in HL5502's description:From the Manufacturer
Even for occasional home maintenance, air tools are more practical and less costly than expensive electric power tools with umpteen mechanical parts and exorbitantly priced batteries of all shapes and sizes. But before investing in smart air tools, you need a quality compressor. This popular 4-gallon twin stack aircompressor from Campbell Hausfeld is oil lubricated and built to last. Its cast iron oil lubricated pump is designed for long lasting, reliable performance. An innovative crankcase design is 25 percent larger than competitive models for improved performance and less oil carryover. Ideal for inflation, nailing, stapling and spraying jobs, this compressor also powers everything from sandblasters and spray guns to drills and die grinders in a matter of seconds. So, rather than investing in an expensive new electric tool set; save time and money with this 4-gallon compressor and Campbell Hausfeld's line of 70 high quality air tools. The initial cost of an air tool is significantly lower than its electrically powered counterpart, and the average tool life expectancy is longer, too. Plus, when powered by this 4-gallon compressor, air tools deliver more torque and higher revolutions-per-minute than electric tools for less downtime and greater productivity.
FEATURES
4-gallon twin stack tank design for portability
Cast iron oil-lubricated pump for long lasting, reliable performance
Crankcase design is up to 25 percent larger than competitive models for improved performance and less oil carryover
Delivers 4 avg scfm @ 90 psi for medium duty pneumatic tools
SPECIFICATIONS
Output: 4 avg scfm @ 90 psi
Type: oil-lubricated
Capacity: 4-gallon
.
found in HL5502's reviews: incomplete package - As someone who is new to the Air tool game, I didn't want to spend alot of money seeing how I do not use air tools regularly but wanted to try them out.To get longer service life than oil free units, This compressor is an oil lubricated unit and yet it does not come with oil! I guess thats one way they can cut costs. It also does not come with a quick connect fitting at the output end, but rather has female threads that you screw an air hose into. I saw this compressor for 139. The manual is not very well written at all, so take your time and read it over a couple of times! When you get this compressor, you will have to go out and buy; 1 bottle of mobile one synthetic motor oil(10w30)for abot 5 dollars, a 1/4 inch fitting and quick connect(about 12 dollars). Now you are ready to plug in a hose and air tools.I am extremely happy with this compressor-it really isn't any noisier than other compressors in this price range-lets face it-compressors are a power tool and thus are loud!I did not find the noise that bad at all. My total investment to get this up and running was still less than 200 dollars which is not bad for an oil lubed compressor. This unit would have been 4 or 5 stars if it came with better directions, oil, and a quick conect fitting on the end.