Air compressor less oil piston ring - Makita MAC2200, Hitachi EC12, Campbell Hausfeld FP202899AV, Porter-Cable CFFN250S, Palmgren 92111, Makita MAC700KIT, Porter-Cable CPLDC2541S, Porter-Cable CPLDC2540S, Makita MAC2400, DeWalt D55151

Air Compressor Less Oil Piston Ring - 1 2

*2 HP Oil-less* Air Compressor \| Makita MAC2200**
	$558.00 by Makita Anodized teflon cylinder and teflon/bronze-based piston ring for improved compression and reduced friction Easy to maintain, reusable foam intake filter Dynamically balanced counterweight crankshaft for reduced vibration Durable cast aluminum components for lightweight and fast heat dissipation Specially designed for use in the construction industry
*14.5 Amp 2 Horsepower 4 Gallon Oiled Twin Hot Dog Compressor* \| Hitachi EC12**
	$417.29 >> $207.00 by Hitachi 60 pounds; 1-year warranty Includes DEWALT synthetic compressor oil and pressure regulator Cylinder constructed of cast iron 4.1 cfm delivered at 90 psi; shut-off valve at line and auto reset 14-1/2 amp 2-horsepower 4-gallon oiled twin hot dog compressor with carrying handle found in EC12's description: com Hitachi’s 2-horsepower compressor is one of the hardest-working units on the market.1 cfm of free air at 90 psi--enough to easily run two tools at once. Because of its compact size and trim weight, it’s the perfect compressor for the home do-it-yourselfer, but taking into account its power and portability, contractors will love it, too.--Kris Jensen-Van Heste From the Manufacturer This Hitachi air compressor is powered by a 2 hp, 115-volt direct-drive motor and oil lube pump at 3,450 rpm.1 cfm of free air, at 90 psi. From the Manufacturer The Hitachi EC12 air compressor is powered by a 2-horsepower, 115-volt direct-drive motor and oil lube pump at 3,450 rpm. It delivers 4 cubic feet per minute of free air at 90 psi.3-gallon capacity Comes standard with line regulator and gauges O-ring on draincock makes valve easy to open and close Pressure switch has start/stop control at 100 and 125 psi with 14-second recovery time 15 amp motor runs at 3,450 rpm, providing 8.2 cubic feet per minute of free air Specifications Horsepower: 2 Amps: 15 Speed: 3,450 rpm Air displacement: 8. Oil lube single piston compressor type, line regulator with gauge, direct drive electric motor, suction cup feet for extra stability, O-ring on draincock makes valve easy to open and close and resists stripping, vertically stacked twin tanks.

*1 Gallon Tank Mounted Air* Compressor with 2 in 1 Nailer \| Campbell Hausfeld FP202899AV**
	$79.00 by Campbell Hausfeld Accessories are included for convenient use right out of the box. Compressor offers automatic shut-off feature. Bonus nailer kit is included with a 2 in 1 1-1/4" brad nailer and 1-1/4" stapler. The sturdy handle allows for comfortable handling and simple storage. 1 Gallon tank offers additional stored air capacity. Tank eliminates pulsations caused by piston action.
*2-1/2" 16 Gauge Finish Nailer/Compressor* Combo Pack \| Porter-Cable CFFN250S**
	$590.00 by Porter-Cable 1 year limited warranty Complete kit with quick-connects, 25' 300 psi air hose, thread sealing tape, nailer case, and wrenches Oil-free compressor produces 3.7 scfm at 40 psi and 2.7 scfm at 90 psi Nailer features cushion grip, depth of drive, piston catch, quick-release nosepiece, and directional exhaust Professional nailer shoots 3/4" to 2-1/2" 16 gauge finish nails
*4.2 Amp 1 Horsepower 1 Gallon Oil-Free Single Hot Dog Compressor* \| Palmgren 92111**
	$129.99 >> $131.72 by Palmgren Die cast aluminum pump with cast iron sleeve (oilless) Compact design very lightweight Direct drive Oilless pump has sealed bearings on all reciprocating parts and Teflon-impregnated piston rings to reduce friction Manual reset overload protection found in 92111's description: From the Manufacturer This Palmgren DIY Series Air Compressor is perfect for the at-home hobbyist or for contractors who need a portable pneumatic power source, and it is oilless for maintenance-free operation. Compressor consists of a 1HP motor, single cylinder, single stage aluminum air compressor pump and a 1 gallon air tank. The pump runs very quietly, so that the compressor can be used in the same area that the work is taking place. Compressor is light weight and portable.
*18 Gauge Brad Nailer Compressor* Combo Kit \| Makita MAC700KIT**
	$518.00 >> $329.95 by Makita Roll bar handle for portability and added protection against harsh jobsite environments Oil lubricated for cooler running pump and an automotive style air filter for easy, low-cost maintenance Large cast iron pump with automotive style cylinder and piston deliver maximum performance The low 1720 rpm is half that of most competitive units, resulting in greater motor and pump life, and the substantially lower noise level makes it the quietest compressor in its class High rated 3.3 CFM @ 90 PSI found in MAC700KIT's description: From the Manufacturer The new MAC700KIT-Hotdog compressor (with AF503 2 Brad Nailer) by Makita is blowing away the competition with built-in features such as a super quiet motor that draws only 12.
*2.5 HP 4 Gallon Oil-Lube Air* Compressor \| Porter-Cable CPLDC2541S**
	$369.99 >> $358.51 by Porter-Cable Three year limited warranty Complete with high-flow regulator and quick-connect, pressure gauge and tank gauge Patent pending oil-lube system with ball bearing design Direct drive, no belts or adjustments are necessary 2.5 HP, 4.3-gallon oil-lube compressor found in CPLDC2541S's description: From the Manufacturer Porter-Cable is proud to introduce our first oil-lube compressor. When we first put our engineers on the task of designing an oil-lube compressor we gave them one priority; it could not have the same imported pump as all the other major brands have. Just as in a car, the lubrication system in the pump is the most vital part in a compressor. That is why this unit was designed with a patent pending oil slinger design as an integral part of the crankshaft that continues to lubricate the piston in any angle. The robust connecting rod utilizes an oversized ball bearing for smooth operation under any condition. The design features don't stop there; it boasts a cast-iron cylinder, stainless steel Swedish valves, and an automotive type paper filter to trap unwanted particles before they enter the system. The crankcase itself was designed to hold 8 ounces of oil, twice as much as in competitive models. Now, take this revolutionary pump engineered to last over 3,000 hours of use and add in the "High Pressure Technology" and you have compressor that will run at 150 pounds per square inch (PSI).5 horsepower induction motor is safely shrouded and acts as a wind tunnel providing more than enough air to cool the unit down even under the most strenuous conditions.3 HP Running Patented oil lubrication system allows pump to be operated on an uneven surface Universal, High-FloSM, push-to-connect coupler in air outlet 150 PSI tank pressure, equivalent to a 7.3 gallon tank at 125 PSI, for 71% more stored work capacity 83 Dba Higher 120 PSI cut-in pressure assures nails will be completely driven in before pump cycles on Two pole, 3,450 RPM capacitor start induction motor for maximum air delivery High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch) Low 12 Amp motor draw prevents accidental tripping of circuit breakers 4 gallon storage capacity air tank supports heavy usage of stapler, brad, finish, roofing and framing nailer Heavy duty cast iron cylinder construction and large 8 oz. oil capacity to assure long life Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, oil, and operating manual SPECIFICATIONS Lubrication: Oil Lube Gauges: 2 Quick Couple: 1/4" NPT Weight (Lbs. PSI: 150 SCFM Air Delivery @40 PSI: 5.4 SCFM Air Delivery @90 PSI: 4.

*2.5 HP 4 Gallon Oil-Lube Air* Compressor \| Porter-Cable CPLDC2540S**
	$580.00 by Porter-Cable Three year limited warranty Full roll cage with high flow regulator and dual quick-connects Patent pending oil-lube system with ball bearing design Direct drive, no belts or adjustments are necessary 2.5 HP, 4.3-gallon oil-lube compressor found in CPLDC2540S's description: From the Manufacturer Porter-Cable is proud to introduce our first oil-lube compressor. When we first put our engineers on the task of designing an oil-lube compressor we gave them one priority; it could not have the same imported pump as all the other major brands have. Just as in a car, the lubrication system in the pump is the most vital part in a compressor. That is why this unit was designed with a patent pending oil slinger design as an integral part of the crankshaft that continues to lubricate the piston in any angle. The robust connecting rod utilizes an oversized ball bearing for smooth operation under any condition. The design features don't stop there; it boasts a cast-iron cylinder, stainless steel Swedish valves, and an automotive type paper filter to trap unwanted particles before they enter the system. The crankcase itself was designed to hold 8 ounces of oil, twice as much as in competitive models. Now, take this revolutionary pump engineered for maximum durability and life, and add in the "High Pressure Technology" and you have compressor that will run at 150 pounds per square inch (PSI).5 horsepower induction motor is safely shrouded and acts as a wind tunnel providing more than enough air to cool the unit down even under the most strenuous conditions. oil capacity to assure long life Patented oil lubrication system allows pump to be operated on an uneven surface Protected panel includes two universal High-FloSM push-to-connect couplers and larger, easy to read regulated air pressure gauge 150 PSI tank pressure, equivalent to a 7.3 gallon tank at 125 PSI, for 71% more stored work capacity 83 Dba Higher 120 PSI cut-in pressure assures nails will be completely driven in before pump cycles on Two pole, 3,450 RPM capacitor start induction motor for maximum air delivery High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch) Specially designed protective transport handles Low 12 Amp motor draw prevents accidental tripping of circuit breakers 4 gallon storage capacity air tank supports heavy usage of stapler, brad, finish, roofing and framing nailer Standard Equipment: Compressor, ASME safety valve, air regulator and gauge, 1/4" quick coupler, oil, and operating manual SPECIFICATIONS Lubrication: Oil Lube Gauges: 2 Quick Couple: 1/4" NPT Weight (Lbs. PSI: 150 SCFM Air Delivery @40 PSI: 5.4 SCFM Air Delivery @90 PSI: 4. found in CPLDC2540S's reviews: A great compressor - So far I'm really impressed with this compressor. The handle does make it fairly easy to transport, but it is still heavy so I recommend buying a second hose to reach the work instead of moving the compressor. The motor is quiet in relation to other compressors I've heard. I can work next to it while it runs and my ears don't ring.
*13 Amp 2-1/2 Horsepower 4 Gallon Oiled Twin Hot Dog Compressor* \| Makita MAC2400**
	$460.00 >> $249.00 by Makita 19-3/8 by 18 by 18-3/4 inches; 77 pounds; 1-year warranty 1/4-inch brass Makita universal coupler Cast-iron pump and roll cage construction 4.2 cfm delivered at 90 psi; low 1,720 rpm extends motor life and lowers noise 13 amp, 2-1/2-horsepower, 4-gallon oiled twin hot dog compressor with handle found in MAC2400's description: From the Manufacturer The new MAC2400 - Twin Stack air compressor by Makita is blowing away the competition.3 amps to operate, a lower 1720 RPM rating and a heavy duty Intake Air Filter system like no other, its easy to see how this unit will out last and outperform everyone else. Oil Lubricated - Cooler running pump, minimizes wear. Large automotive style industrial air filter for increased air intake and greater efficiency. Oil sight glass for fast, easy and efficient maintenance. found in MAC2400's reviews: Not for Contractors - 2 cfm 3 hp 5 gallon tank unit it is twice the machine for around $ 50 dollars more, you wont be sorry!It can run two nail guns driving 3inch coated ring* shank nails.*
*14 Amp 2-1/2 Horsepower 4-Gallon Oiled Twin Hot Dog Compressor* \| DeWalt D55151**
	$449.35 >> $219.99 by DeWalt 18-1/2 by 15 by 16-3/4 inches; 60 pounds; 1-year warranty Includes DEWALT synthetic compressor oil and pressure regulator Cylinder constructed of cast iron Delivers 3.2 cfm at 100 psi; features overload protection to eliminate risk of motor damage 14 amp 2-1/2-horsepower 4-gallon oiled twin hot dog compressor with carrying handle found in D55151's description: From the Manufacturer This versatile compressor can perform a multitude of jobs, from roofing to finish to trim to home/hobby applications. The pump is oil-lubricated for improved durability. The compressor delivers 3. Includes 3/8-inch regulator and initial fill of DeWalt synthetic air compressor oil.2 cubic feet per minute delivered at 100 psi, enables speedy recovery Oil-lubricated pump improves durability 4-gallon twin-stack tank design offers proven acceptance in the market Lightweight design improves portability Overload protection eliminates risk of motor damage Dual soft-start valves assist in cold weather startup Cast-iron cylinder enhances pump life Specifications Drive: direct drive Horsepower: 2-1/2 max hp Tank size: 4 gallons Power supply: 120-volt AC, 14 amps, 60 Hz, 2-pole induction motor Cubic feet per minute at 100 psi: 3. Includes DeWalt synthetic compressor oil Pressure regulator Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty Product Description Portable electric powered compressor with 2 HP, high output motor. Oil lubricated pump improves durability. Oil lubricated for longer life. found in D55151's reviews: User friendly compressor - This is probably the best small compressor I have owned. It also has the added durability feature of an oil reservoir to keep the piston well lubed.Previous small compressors I have owned were oiless types and were prone to freeze up under prolonged use.