29 by 19 by 19-1/2 inches; 88 pounds; 1-year warranty 1/4-inch brass Makita universal coupler Cast-iron pump and roll cage construction 6-1/2 cfm delivered at 90 psi; low 1,720 rpm extends motor life and lowers noise 13.8 amp, 3-horsepower, 5-gallon oiled wheeled single hot dog compressor and folding handle
found in MAC5200's description: com Product Review
Whether you need a compressor for woodworking, painting, caulking or construction, this 5-gallon Makita is a great choice, primarily because of its impressive 6-1/2 cfm at 90 psi on a 13. Built-in Storage Compartment - Conveniently stores air fittings & accessories. Air Hose Wrap - Stores 50 of 3/8" Air Hose with handle folded or upright. Large automotive style industrial air filter for increased air intake and greater efficiency.
found in MAC5200's reviews: MAC5200 Arrived Damaged - Just got finished reading a review where someone else received one damaged.
1 year limited warranty Complete kit with quick-connects, 25' 150 psi air hose, thread sealing tape, nailer case, and wrenches Oil-free compressor produces 3.7 scfm at 40 psi and 2.7 scfm at 90 psi Nailer features cushion grip, depth of drive, quick-release nosepiece, and directional exhaust Professional nailer shoots 3/4" to 2" 18 gauge brad nails
found in CFBN200A's description: com Review
Remember when you were a kid on Christmas morning, with a pile of new toys to play with--but no batteries? Well, Porter-Cable's not going to let that happen to you again. Here they've packaged their hard-working 18-gauge brad nailer with its power source--a 15 amp, 120-volt, 6-gallon compressor driven by a 2-horsepower oil-free motor. Fill up the nailer with standard 18-gauge brads from 3/4 inch to 2 inches long, hook up, and you're ready to install baseboards, chair rails, moldings, even make quick work of those wooden craft items like country shelves and vegetable bins. The kit comes with quick connects, 25 feet of 150 psi air hose and thread sealing tape.
Comes with 10-foot power cord that plugs into 12-volt car cigarette lighter Comes with 1 sports needle and 2 nozzle adapters
Inflates average tires in 5-7 minutes
Built-in work/emergency light
275 PSI high pressure aircompressor
found in 2014's description: com Review
It's about time somebody came out with one of these--hats off to Wagan! It's small, light, inexpensive, and needs only a 12-volt power supply. We doubt you'll be able to find a more versatile compressor for the price. --Kris Jensen-Van Heste
Product Description
The Wagan 3-in-1 AirCompressor is perfect for vehicles, bike tires, balls, air mattress, and more. The special features include a high pressure compressor that generates 275 PSI, high air flow inflator for quick inflation, built-in light, and pressure gauge.
Product Description
Handy portable air pump runs from the car cigarette lighter. Be prepared for the unexpected with 12V tire air inflators. Air Pump Inflates: Bike Tires, Car Tires (SUV, Truck), Athletic Balls, Air Mattresses, Rafts, Inflatable Furniture, Air Tools. Air Pressure (max)of Tire Inflator: 275PSI Special Features of this 12 Volt Auto Air Inflator: High Pressure 275 PSI High Air Flow Inflator Built-in Work light/Emergency light Inflates average sized tires (16') in 5-10 minutes Pressure Gauge Reader Continuous Usage Time: Tire Inflator Has A Heavy Duty Motor. Accessories: 3 Nozzle adapters: collar, tire inflator nozzle, sports needle 12V Power Cord: 10 ft cord High Pressure Air Hose: 14' Air Hose with quick release valve connector Power Source of Tire Inflators: 12V cigarette lighter accessory receptacle Low Power Consumption.
49 pounds; 1-year warranty Includes 2 nailers, stapler, compressor, air hose with coupler and plug, oil, manuals Rugged plastic housings on tools; cast-iron compressor Includes FN250B finish nailer, BN125A brad nailer, NS100A stapler, and 6-gallon pancake compressor Factory-reconditioned nailer, stapler, and compressor combo kit
found in CFFN251TR's description: com Product Review
Ideal for onsite trim work, architectural woodwork, and casework installation, this combo kit from Porter-Cable includes a finish nailer, brad nailer, narrow crown stapler and compressor.
First, the compressor: The unit blasts out an impressive 150 maximum psi for driving more nails than traditional 135 psi compressors. Running on standard household current, this 120-volt electric compressor also cranks out 2.6 standard cubic feet per minute at 90 psi for quick compressor recovery time and faster nailing. Weighing just 34 pounds, the compressor is easy to transport from project to project. And, two quick-connect couplers let the compressor power two nail guns to at the same time. Olson
Whats in the Box 6-gallon, 150 psi compressor with two couplers; 1-1/4-inch, 18-gauge brad nailer; 2-1/2-inch, 16-gauge finish nailer; 25-foot air hose with coupler and plug; 2,000 fasteners, nailer oil, canvas carry bag.
32 pounds; 1-year warranty Includes compressor, ASME safety valve, regulator, gauges, 1/4-inch quick coupler, manual Cast-iron construction Provides 3.7 cfm at 40 psi and 2.6 cfm at 90 psi; air-regulator and quick-connect coupler 15 amp, 2-horsepower, 6-gallon oil-free pancake compressor; handle; built-in thermal overload protector
found in CPFAC2600P's description: com Review
This Porter-Cable 2-horsepower, 6-gallon pancake compressor transports easily but has plenty of capacity and power--enough to support heavy use of brad and finish nailers and moderate use of framing nailers. Features include a high-flow regulator, an easy-to-read air pressure gauge, automatic thermal overload protection, an industrial-style quick-connect body in the air outlet, and a long-life motor with replaceable brushes. The compressor weighs 32 pounds and has a handle built into the motor housing, so it's relatively portable. This Porter-Cable is as convenient and easy to use as any compressor out there, and it's just about ideal for brad and finish nailers that are being used inside people's homes on a regular basis. --Jonathon Tudor
From the Manufacturer
This oil-free 2-hp pancake-style aircompressor has a new high pressure design that provides 28-percent more usable air! This allows more run time and less down time. The high-flow regulator keeps the tank pressure between 120 PSI and 150 PSI, allowing a greater reserve air capacity. Lightweight for portability, this compressor has plenty of power to fire all brad and finishing nailers as well as moderate usage of roofing and framing nailers. Includes compressor, high flow air regulator and gauges, quick coupler, and instruction manual.8 HP Running
Built-in automatic thermal overload protection
Larger Easy to read regulated air pressure gauge
Universal, High-FloSM, push-to-connect coupler in air outlet
One year warranty
150 PSI - 10 gallon equivalent tank size as compared to conventional 125 PSI model
87 Dba
Oil-free pump design for durability and no maintenance
Long-life motor with replaceable brushes
High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
6 gallon tank supports heavy usage of stapler, brad and finish nailer, standard-to-heavy roofing and standard framing nailer
120 Volt, universal motor starts easily under low voltage conditions
Extension cord use without tripping circuit breakers
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual
SPECIFICATIONS
Lubrication: Oil Free
Gauges: 2
Quick Couple: 1/4" NPT
Weight (Lbs. PSI: 150
SCFM Air Delivery @40 PSI: 3.7
SCFM Air Delivery @90 PSI: 2.
Product Description
2 HP, 6 Gallon, Oil-Free Pancake AirCompressor, 150 PSI Maximum Tank Pressure, 3.6 SCFM @ 90 PSI 87 DBA, 15 AMPS, Built-In Thermal Over Load Protection, Hi-Flo Air Regulator With Quick-Connect Coupler, Regulated Pressure Gauges, Includes ASME Safety Valve, 1 Year Warranty.
found in CPFAC2600P's reviews: Porter Cable compressor - I have had no problems with the compressor. I do not hesitate to give a five-star review .
23 by 23 by 13-1/2 inches; 68-1/2 pounds; 1-year warranty Includes DEWALT synthetic compressor oil and pressure regulator Cylinder constructed of cast iron 4-1/2 cfm delivered at 100 psi; dual soft start valve for cold-weather starts; oil-lubricated pump 15 amp 2-3/4-horsepower 4-gallon oiled twin hot dog compressor with carrying handle
found in D55155's description: com Review
At just a foot high and less than two feet wide out of the carton, this compressor was quite a bit smaller than we expected, so to be fair, we quickly lowered our expectations. The joke was on us, though, because this little powerhouse just doesnt quit, and we learned that you cant judge a compressor by its size. Emglos half-century in the compressor business is evident in this model, and with a couple of small exceptions (well get into that in a minute), we dont think anyone could make a finer piece of air power. Now, this may be a plus or a minus in your book, but we liked the fact that the compressor is factory set to power on at 100 psi an+d shut off at 120 psi, and the cycle time was under 15 seconds.) It has air aplenty for two nailers at once, and with that fast recovery, the job will get done in no time.
In balance, this is one of the best compressors weve seen for the size, power, ruggedness and incredible portability it offers. Heres to a great pairing of two great toolmakers.--Kris Jensen-Van Heste
Product Description
DeWalt's 2-horsepower, 4-gallon compressor features an oil-lubricated design with a cast-iron cylinder to guarantee job site durability. The new roll-cage design and integrated control panel protects the compressor and the controls from accidental damage. Carrying the compressor is easy, too: the flat design lets the user tote the compressor comfortably like a suitcase. The package comes with the initial fill of DeWalt synthetic aircompressor oil.
From the Manufacturer
This 4-gallon hand-carry compressor was designed to meet the tough demands of the job site. The handle is situated to allow the user to carry the compressor with one hand in a natural walking position. The roll cage and integrated instrument panel protect the compressor and instruments from damage. Comes with the initial fill of DeWalt's synthetic aircompressor oil.
Includes
DeWalt synthetic compressor oil
2 universal quick couplers
Regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty
Product Description
2 HP, 4 Gallon, Electric Single Tank Hand Carry Compressor, 4.
found in D55155's reviews: Yes! - This is to second everything Curtis Cordwell says in his earlier review. Ideal compressor for one or two people on cabinet, finish and trim work, or for any work-alone carpenter from framing to finish. I work alone a lot, and I have found that this is all the compressor I need. On the other hand, if I had a crew, I would not worry about this compressor's standing up to their abuse.
52 pounds; 1-year warranty Includes brad nailer, finish nailer, compressor, vinyl air hose, pipe joint tape Heavy-duty steel construction Comes with 16-gauge finish nailer, 18-gauge brad nailer, and 6-gallon, 10 amp, oil-free pancake compressor Factory-reconditioned finish nailer and compressor combo kit
found in CFFN250NR's description: You can finish any woodworking project with this limited edition kit that includes both a finish nailer, brad nailer, and compressor. Ideal for on-site trim work, architectural woodwork, and casework installation, this finish nailer and compressor kit from Porter-Cable is perfect for the finish trim installer. Includes: 1 Porter-Cable 16 gauge, 3/4"�2-1/2" finish nailer kit (FN250B), 1 Porter-Cable 18 gauge, 5/8" �1-1/4" braid nailer kit (BN125A), 1 135 psi, 2hp, 6 gallon pancake style compressor, 1 300 psi, 25' vinyl air hose, 1 air hose fitting, 1/4" male plus coupler, Pipe joint tape.
found in CFFN250NR's reviews: New Woodworker - Mine are labeled as reconditioned in Mexico (as I read in another unfavorable review) but I have not experienced any problems yet.
18 by 10 by 22 inches; 52 pounds; 1-year warranty 1/4-inch brass Makita universal coupler Cast-iron pump and roll cage construction 3.3 cfm delivered at 90 psi; low 1,720 rpm extends motor life and lowers noise 12.4 amp, 2-horsepower, 2-1/2-gallon oiled single hot dog compressor with handle
found in MAC700's description:From the Manufacturer
The new MAC700 - Hotdog compressor by Makita is blowing away the competition with built-in features such as a super quiet motor that draws only 12.0HP AIRCOMPRESSOR 12. hot dog tank Low amp draw & oil lubricated Roll-bar handle Industrial air filter & cast iron cylinder Oil sight glass & lever handle ball valve Built-in thermal overload for motor protection MAC700 2HP AIRCOMPRESSOR.
found in MAC700's reviews: broken twice - Worse than that is after fixing it I looked online to write this review and it is $25 cheaper.
19-3/8 by 18 by 18-3/4 inches; 77 pounds; 1-year warranty 1/4-inch brass Makita universal coupler Cast-iron pump and roll cage construction 4.2 cfm delivered at 90 psi; low 1,720 rpm extends motor life and lowers noise 13 amp, 2-1/2-horsepower, 4-gallon oiled twin hot dog compressor with handle
found in MAC2400's description:From the Manufacturer
The new MAC2400 - Twin Stack aircompressor by Makita is blowing away the competition.3 amps to operate, a lower 1720 RPM rating and a heavy duty Intake Air Filter system like no other, its easy to see how this unit will out last and outperform everyone else. Large automotive style industrial air filter for increased air intake and greater efficiency.
found in MAC2400's reviews: The other Reviews are Correct, this is a great compressor - I do not want to repeat what all the other reviews have said. This is a quality compressor. In this day and age of plastic junk, I am surprised some of the reviews complained about wieght.
The compressor is just as quiet as others report.
Why did I get this compressor? In sum, (1) I wanted a GOOD quality tool that was not Chineese junk, (2) I wanted at least 4 cfm for tools and (2) I did not want to spend a fortune. There seems to be several classes or levels of compressor in the lower price range. Unless you are getting a specialized mini-compressor just for a small brad gun, the $125-175 compressors are mostly junk: loud and rough. This Makita is in the next step up, with compressors in the $225 to 325 range. Most of this second tier are either made for just for job sites or are just bigger cheaply made compressors. The Dewalt is an excellent compressor, but you cannot use it next to you in an exclosed shop -- its too loud. It is a very well made little compressor.
The compressor seems to live up to its specs. When I went to use a Snap-On 7200 3/8" air ratchet, the performance was just adequate.
I have not owned a compressor is many years. As an advanced and serious home workshop dude, this review is not written for the pros. But for a serious homeowner that appreciates quality tools and needs a general purpose compressor, I believe I found the perfect compressor.
85 pounds; 1-year warranty Includes compressor, mobility kit, and manual Cast-iron construction 2-port removable console for remote air regulation; full roll cage to protect kit; 150 max psi 15 amp, 3-1/2-horsepower, 4-1/2-gallon oil-free wheeled single hot dog compressor with handle
found in C3151's description: com
Porter-Cables solved the compressor mobility problem on two levels with this tool. First, and most impressively, its got a two-port removable console for remote air regulation and higher air pressure right where youre working. And the compressor itself has wheels and an extension handle, making life easier on you.
Lets face it: This compressors big, heavy and loud, with a max psi of 150. You can run three or four guns at once off it with a splitter and have no air supply problems whatsoever.5 gallon, oil-free contractor style compressor is packed with features. The high-flow air regulator and two-port removable console are winning combinations for contractors. Having the ability to remove the console gives the user the opportunity to remote air regulation and gain higher air pressure closer to the job site. Air delivery at 40 PSI: 7.
What's in the Box C3151 Job Boss Compressor, mobility kit, manual.5 gallon, oil-free contractor style compressor is packed with features. The High-flo air regulator and 2-port removable console are winning combinations for contractors. Having the ability to remove the console gives the user the opportunity to remote air regulation and gain higher air pressure closer to the job site.
Product Description
Includes Compressor, Mobility kit, ASME safety valve, Operating manual, Limited one-year warranty.
found in C3151's reviews: Job Boss CompressorReview - This compressor has delivered in all of the areas I expected.