item.gif border=0 width=9 height=11> 60 pounds; 1-year warranty item.gif border=0 width=9 height=11> Includes DEWALT synthetic compressor oil and pressure regulator item.gif border=0 width=9 height=11> Cylinder constructed of cast iron item.gif border=0 width=9 height=11> 4.1 cfm delivered at 90 psi; shut-off valve at line and auto reset item.gif border=0 width=9 height=11> 14-1/2 amp 2-horsepower 4-gallon oiled twin hot dog compressor with carrying handle
found in EC12's description: com
Hitachi’s 2-horsepower compressor is one of the hardest-working units on the market. Plug it into any standard household outlet and get 4.1 cfm of free air at 90 psi--enough to easily run two tools at once. Because of its compact size and trim weight, it’s the perfect compressor for the home do-it-yourselfer, but taking into account its power and portability, contractors will love it, too. Minimum maintenance keeps this baby humming for years--all it wants is lubrication. Hitachi’s known for workhorse tools, and this one is a prime example.--Kris Jensen-Van Heste
From the Manufacturer
This Hitachi aircompressor is powered by a 2 hp, 115-volt direct-drive motor and oil lube pump at 3,450 rpm.5 amps, so it won't overheat electrical circuits. It features vertically stacked twin tanks (each with a 2-gallon capacity), line regulator, shutoff valve at line, auto reset, capacitor start, run class F motor, and pressure switch set at 125 psi kick-off, 100 psi kick-on. It delivers 4.1 cfm of free air, at 90 psi.
From the Manufacturer
The Hitachi EC12 aircompressor is powered by a 2-horsepower, 115-volt direct-drive motor and oil lube pump at 3,450 rpm.5 amps, so it won't overheat electrical circuits. It features vertically stacked twin tanks (each with a 2-gallon capacity), line regulator, shutoff valve at line, auto reset, capacitor start, run-class F motor, and pressure switch set at 125 psi kick-off and 100 psi kick-on. It delivers 4 cubic feet per minute of free air at 90 psi.
O-ring on draincock makes valve easy to open and close
Pressure switch has start/stop control at 100 and 125 psi with 14-second recovery time
15 amp motor runs at 3,450 rpm, providing 8.2 cubic feet per minute of free air
Specifications
Horsepower: 2
Amps: 15
Speed: 3,450 rpm
Air displacement: 8.
Recovery time: 14 seconds
Warranty All Hitachi power tools purchased in the U. come with a warranty that guarantees freedom from defects in materials and workmanship for a period of one year from the original purchase date. Warranty coverage is conditional upon the original purchaser furnishing Hitachi Power Tools U. in Norcross, Georgia, with satisfactory written proof of the original purchase date.
Product Description
Hitachi EC12 15 Amp 3450RPM, 8.3 gallon tank capacity. Oil lube single piston compressor type, line regulator with gauge, direct drive electric motor, suction cup feet for extra stability, O-ring on draincock makes valve easy to open and close and resists stripping, vertically stacked twin tanks.
found in EC12's reviews: Disappointing - Had this unit for about three years with very light use - occasional tire inflation. As a previous writer indicated, the gauges got stuck, the pressure release valve froze, it wouldn't start and turned out to be uneconomical to repair. Basically, as other reviewers on other sites stated.its a piece of junk - Stay away. A real turd - I bought one two years ago, and I'd driven less than 250 nails with it before it failed to work properly, so that's about a buck per nail - a great value. It now pumps up, and doesn't stop until the pressure safety valve blows, then the motor goes into some kind of cardiac arrest. Now I'm sure I'll be raped at the repair center as I spend >$100 to repair this $200 turd. Save your money and pound the friggin' nails in with a hammer. Good Compressor - This compressor is surprisingly quiet and it feels very sturdy. It came with one of its' feet bent and I felt the packaging could be better. It has worked well so far. The compressor is heavy, mostly because it is mostly metal and it weighs about 65lbs. Itworks well, comes with compressor oil but you'll need to buy some quick couplings and teflon tape. Happy, but could be happier - I was given a high recommendation for Hitachi power tools by a construction veteran, so I purchased one. The compressor is still fairly new and seems to provide excellent power for framing guns, finishing nailers, and hoppers. However, I am not incredibly impressed with this compressors ability to start. I realize during the cold winter mornings (not too cold in the San Francisco bay area), that some compressors require an empty tank to kick over, but this is getting a little ridiculous. On a 45 degree morning I don't even try to kick over the tank before making sure it is decompressed completely, and during the middle of the day I still have to, on a not-so-rare occasion, pull the pressure release valve. I have seen on another review that a Smart Start inlet filter can be purchased to cure this problem, but it's annoying that you need to buy new parts to cure problems on a new compressor.
I guess having only one complaint for a power tool isn't too bad, but I'm sure there's a better compressor out there. bad thermol protector - the compressorworks great but the thermol protector is not very strong and wore out in just over a year. Do not plug the compressor into an extention cord. I had it plugged into a 12/2 cord and it still drew to much power for it and shorted it out. Plug it right into the wall and run longer hoses instead of an extention cord. Hitachi's Dependable Compressor - I chose the Hitachi three years ago because it has a fine compressor and motor, solid construction, and overall good design. It has been entirely reliable and three years later I still am using it both in my cabinet shop and on the job for residential remodeling. The only significant design flaw is the position of the gauges. Despite this one flaw I would still by another Hitachi in a heart beat. The Hitachi is not only reliable, but, unlike many compressors, it truly works on 15 amps. This compressor has never blown a fuse on me, which is something of a miracle considering the wiring in many of the older homes I remodel. Compressor great, regulator bad - This compressor is a great value. It has a quality oil lubricated motor and is competitively priced with "oil-less" compressors of similar size and capacity. Itworks great with my various small air tools (palm nailer, impact wrench, etc). I dismantled it and found that the dial threads had stripped. I replaced the regulator with an inexpensive AmFlo model purchased at Lowes, and am much happier with the new one -- easier to adjust, more precise, and more accurate. If Hitachi included a better regulator, they would have a 5 star product. A good little workhorse - Works reliably and does so on just about any household circuit: you won't have to go looking for a 20 amp plug.Puts out enough air to keep two framing nailguns running at full speed.
I find that I am using the big shop compressor much less - it's just so easy to plug in the handy little Hitachi for everything.
The gauges are a weak spot- very prone to damage from both bad design (plastic cased and weak ) and bad positioning. As the Hitachi uses an odd-sized thread for their gauges you have to either replace them with another (relatively expensive at $17 or so and weak plastic ) Hitachi gauge or replace the regulator and add a new gauge (costs a little more but most replacement regulators are better made than the original costs maybe $21 with a better gauge).
item.gif border=0 width=9 height=11> Ball valve drain allows for quick and thorough tank draining item.gif border=0 width=9 height=11> Dual voltage feature allows easy switching from 120 to 240 volts item.gif border=0 width=9 height=11> Dual control feature allows start/stop or constant run option item.gif border=0 width=9 height=11> Twin cylinder, cast iron, oil lubricated pump item.gif border=0 width=9 height=11> 8.4 cfm delivered at 100 psi with 17-gallon tank
found in D55585's description:From the Manufacturer
You will never run short of air again with this 2-horsepower electric wheeled compressor supported by an ASME-coded 17-gallon OSHA-recognized tank. The twin-cylinder, cast-iron, oil-lubricated pump is backed by Emglo's 50 years of proven durability and reliability. The DeWalt D55585 features dual control for either stop/start or constant run operation. It also features dual voltage, so you can change from 120-volt to 240-volt operation without added work. The user can quickly and completely drain the compressor by the ball valve drain, which won't clog like other models that use needle valves. The D55585 includes DeWalt's synthetic compressor oil and a 3/8-inch NPT pressure regulator.4 cubic feet per minute delivered at 100 psi, enables speedy recovery
Twin-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability
2-horsepower motor provides increased performance
Dual wheels make maneuvering easier on the worksite
Dual control feature allows start/stop or constant run operation
Dual voltage feature allows easy switching from 120- to 240-volt operation
ASME-coded 17-gallon OSHA-recognized tank
Ball valve drain allows for quick and thorough tank draining
Specifications
Drive: belt drive
Horsepower: 2 hp
Tank size: 17 gallons
Power supply: 2-pole induction motor
Cubic feet per minute at 100 psi: 8.
Includes
DeWalt synthetic compressor oil
3/8-inch NPT pressure regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.
item.gif border=0 width=9 height=11> Low profile design and pneumatic tire for mobility item.gif border=0 width=9 height=11> Automatic idle control for reduced fuel consumption item.gif border=0 width=9 height=11> Ball drain valve allows for quick and thorough tank draining item.gif border=0 width=9 height=11> Twin cylinder, cast iron, oil lubricated pump for durability and reliability item.gif border=0 width=9 height=11> 5.5 HP Honda GX gas engine provides proven reliability and durability
found in D55270's description: The 8-gallon wheelbarrow design and pneumatic tire allows for mobility on nearly any job site. The automatic throttle control allows the unit to idle and conserve fuel when air is not required. Other features include a braided steel after-cooler, heavy-duty belt guard, ball-type tank drain valves, and a 3/8-inch regulator with gauges. The D55270 comes complete with the initial fill of DeWalt synthetic aircompressor oil.9 cubic feet per minute delivered at 100 psi for quick recovery
Twin-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability
Low-profile design for easy maneuverability
5.5-horsepower Honda OHV GX gas engine provides proven reliability and durability
Automatic idle control for reduced fuel consumption
Pneumatic tire improves worksite mobility
Ball valve drain allows for quick and thorough tank draining
Specifications
Drive: belt drive
Horsepower: 5.
Includes
DeWalt synthetic compressor oil
3/8-inch NPT pressure regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty
Product Description
5.5 HP, 8 Gallon, Compressor Powered By A Honda GX Gas Engine With Proven Reliability & Durability, 8.9 CFM @ 100 PSI, Automatic Idle Control For Reduced Fuel Consumption, Low Oil Shut Off Provides Greater Engine Protection, Twin Cylinder, Cast Iron, Oil Lubricated Pump With Emglo's 50 Years Of Proven Durability & Reliability, Ball Valve Drain Allows For Quick & Thorough Tank Draining, Low Profile Design For Easy Maneuverability, Pneumatic Tire Improves Worksite Maneuverability, Includes: Dewalt Synthetic Compressor Oil & Pressure Regulator.
found in D55270's reviews: Dewalt compressor - The compressorworks great! I only wish it came with a bigger front tire. The tanks often hit the ground when moving it.
item.gif border=0 width=9 height=11> ASME coded 17-gallon OSHA recognized tank item.gif border=0 width=9 height=11> Automatic idle control for reduced fuel consumption item.gif border=0 width=9 height=11> Ball drain valve allows for quick and thorough tank draining item.gif border=0 width=9 height=11> Four cylinder, cast iron, oil lubricated pump for durability and reliability item.gif border=0 width=9 height=11> 9 HP Honda GX gas engine provides proven reliability and durability
found in D55275's description: The D55275 17-gallon portable unit has two wheels for more stable mobility. It's powered by an 8-horsepower Honda engine with automatic throttle control to conserve fuel when air is not being used. The cast-iron four-cylinder pump is designed and built for longevity. Compressor includes a 3/8-inch regulator and the initial fill of DeWalt synthetic aircompressor oil.2 cubic feet per minute delivered at 100 psi for high-volume usage
Quad-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability
Dual wheels make maneuvering easier on the worksite
8-horsepower Honda OHV GX gas engine provides proven reliability and durability
Automatic idle control for reduced fuel consumption
ASME-coded 17-gallon OSHA-recognized tank
Ball valve drain allows for quick and thorough tank draining
Specifications
Drive: belt drive
Horsepower: 8 hp
Tank size: 17 gallons
Power supply: Honda gas OHV GX engine
Cubic feet per minute at 100 psi: 16.
Includes
DeWalt synthetic compressor oil
3/8-inch NPT pressure regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.
item.gif border=0 width=9 height=11> Low oil shut off provides greater engine protection item.gif border=0 width=9 height=11> 8 HP Honda OHV GX gas engine provides proven reliability and durability item.gif border=0 width=9 height=11> Low profile design for easy maneuverability item.gif border=0 width=9 height=11> Quad cylinder, cast iron, oil lubricated pump item.gif border=0 width=9 height=11> 16.2 cfm delivered @ 100 psi for high volume applications
found in D55271's description: 2 cubic feet per minute @ 100 psi, while the low-profile design of the compressor means less operator fatigue and maximum job site maneuverability. The quad-cylinder, cast-iron, oil-lubricated pump has Emglo's 50 years of proven durability and reliability behind it. Features include a beefed-up, totally enclosed steel belt guard, pneumatic tire, brass valves and fittings, stainless-steel braided after-cool tube, ball valve drain, and constant run control so the engine runs idle when not under load. The compressor includes a 3/8-inch regulator and an initial fill of DeWalt synthetic aircompressor oil.2 cubic feet per minute delivered at 100 psi for high-volume applications
Quad-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability
Low-profile design for easy maneuverability
8-horsepower Honda OHV GX gas engine provides proven reliability and durability
Automatic idle control for reduced fuel consumption
Pneumatic tire improves worksite mobility
Ball valve drain allows for quick and thorough tank draining
Specifications
Drive: belt drive
Horsepower: 8 hp
Tank size: 8 gallons
Power supply: Honda gas OHV GX engine
Cubic feet per minute at 100 psi: 16.
Includes
DeWalt synthetic compressor oil
3/8-inch NPT pressure regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.
item.gif border=0 width=9 height=11> 110 pounds; 1-year warranty item.gif border=0 width=9 height=11> Includes compressor, ASME safety valve, air regulator, gauges, 1/4-inch coupler, manual item.gif border=0 width=9 height=11> Cast-iron construction item.gif border=0 width=9 height=11> Max 135 psi; 8 cfm at 40 psi, 5.7 cfm at 90 psi; 90 dB item.gif border=0 width=9 height=11> 15 amp, 4-1/2-horsepower, 15-gallon oil-free wheeled single hot dog compressor with handle
found in CPF4515's description:From the Manufacturer
A real performer, this 15-gallon aircompressor allows more usable air to be stored in the tank. The high-pressure design allows for longer run time between refills - it's like being able to fit 19 gallons of air in a 15-gallon tank - so you'll get more done. A higher flow regulator starts the pump at 110 psi and stops it at 135 psi for more pressure and airflow. The oil-free design eliminates maintenance and the possibility of oil overspray for trouble-free use, and also allows operation on slopes and angles without spillage. A cushioned grip and large wheels provide maneuverability with ease and comfort. This compressor is excellent for home shop use and moderate construction usage. Your purchase includes compressor with high-flow, high-pressure regulator and gauge, 1/4-inch quick coupler, and operator's manual.8 HP Running
135 PSI - 19 gallon equivalent tank size as compared to conventional 125 PSI model
90 Dba
120 Volt capacitor start induction motor
High-FloSM air regulator and High-FloSM quick connect coupler for more work at higher pressure (110 PSI start and 135 PSI stop pressure switch)
Cushioned handle for comfortable grip
Large air regulated pressure gauge for easy visibility
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual
SPECIFICATIONS
Lubrication: Oil Free
Gauges: 2
Quick Couple: 1/4" NPT
Weight (Lbs. PSI: 135
SCFM Air Delivery @40 PSI: 8.0
SCFM Air Delivery @90 PSI: 5.7
Pressure Release: YES
Regulator: YES
WARRANTY One-year limited warranty on machines, parts, and accessories.5 HP, 15 Gallon, Oil-Free Horizontal AirCompressor, 135 PSI Maximum Tank Pressure, 8 SCFM @ 40 PSI & 7 SCFM @ 90 PSI, 90 DBA, 15 AMP Capacitor Start Induction Motor, Hi-Flo Air Regulator With Quick-Connect Coupler, Regulated Pressure Gauges, Includes Cushioned Handle & Wheel Kit, ASME Safety Value, l Year Warranty.
found in CPF4515's reviews: UPS damaged but works fine - I will not complain about UPS' faults here as I recieved it with minor cosmetic damage.
I love this work-horse of a compressor. It does what I need, and it is quieter than my last compressor from Sears. I am not easily impressed, but I am with Porter-Cable products. works as well as their other products - reliably. - Bought at Lowe's for [$$$]; I was putting in 3/4" oak flooring, crown moulding, and needed a compressor to run the nailers. I am not a pro, just a weekend warrior, and this compressor delivered the power that I needed.
item.gif border=0 width=9 height=11> 5-year limited warranty item.gif border=0 width=9 height=11> Provides 5.6 scfm at 40 psi and 5.1 scfm at 90 psi item.gif border=0 width=9 height=11> High-flow regulator for more efficient operation of pneumatic tools item.gif border=0 width=9 height=11> Tank pressure is maintained between 145 and 175 psi for more usable air item.gif border=0 width=9 height=11> High-pressure technology provides the equivalent of a 60-gallon air supply
found in CPFC2TV3525VP's description:From the Manufacturer
This 25-gallon vertical aircompressor is a real performer with a high-pressure design that allows more usable air to be stored in the tank. It's like being able to fit 60-gallons of air in a 25-gallon tank, giving you a longer time between refills, you'll get more done. A higher flow regulator starts the pump at 145 psi and stops it at 175 psi for more pressure and airflow. Cast-iron cylinder sleeves and twin cylinders provide long-lasting durability and trouble-free use while the oil-free design allows operation on slopes and angles. Includes compressor with high-flow, high-pressure regulator and gauge, 1/4-inch quick coupler, and operator's manual.6 HP Running
175 PSI - 60 gallon equivalent tank size as compared to conventional 125 PSI model
82 Dba
High-FloSM air regulator (145 PSI start and 175 PSI stop pressure switch) and High-FloSM quick connect coupler
Provides the highest level of moderate-to-heavy duty, tool operation in its class
Direct-drive, twin cylinder, oil free design for duability and no maintenance
120 Volt high-torque, capacitor start induction motor for reliable starting
Longer life and quieter operation with "4 Pole" 1725 RPM motor
Large air regulated pressure gauge for easy visibility and better accuracy
Cushioned handle for comfortable grip
Shroud with integrated air intake filter improves cooling and reduces noise
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual
SPECIFICATIONS
Lubrication: Oil Free
Tank Size Gal. PSI: 175
SCFM Air Delivery @40 PSI: 5.6
SCFM Air Delivery @90 PSI: 5.): 130
WARRANTY Five-year limited warranty.
Product Description
25-gallon tank, 15 amps @ 115 volts, 175 PSI, SCFM Air Delivery 5.1 @ 90 PSI, Pressure release, Regulator, 2 gauges, Standard equipment: Compressor, ASME safety valve, air regulator and gauges.
found in CPFC2TV3525VP's reviews: great choice for general purpose home use - I recently bought one of these, and have been quite pleased so far. The two-stage compressor means that it is quieter than a single-stage unit, and should mean better reliability as well.
The owner's manual suggests that it should be the only thing operating on a 15 amp circuit. They warn that it could trip the breakers if you turn on anything else, because it pulls close to 15 amps all by itself. I use it on a 20 amp circuit, and have had no trouble.
I've used some fairly demanding air tools with it, such as air drills and die grinders. The motor comes on early and stays on under continuous air drill usage, but it manages to keep up.
You can probably get this cheaper at a local store if it is available and if you have a vehicle that can haul it around, because Amazon has to cover the cost of shipping. However, if you live somewhere remote then it is probably worth it to have Amazon ship it to you. It definitely takes two people to lift it up into a truck bed.
It comes with a universal-style female quick disconnect.
The only thing I don't like about it is the process for depressurizing the tank. You have to pull open the spring-loaded safety valve. Also, since the spring must be set for 175 psi, it becomes very hard to keep open as the pressure drops down below 100 psi or so. And the drain valve is hard to open and hard to seal. It is also easy to damage if it is over-tightened.
The good news is that the drain valve can be removed. I replaced it with some tubing and a manual ball valve. GREAT FOR A WON MAN SHOP - I PURCHASED THIS COMPRESSOR ABOUT TO WEEKS AGO AND HAVE USED IT A LOT IN MY ONE MAN WOODWORKING, ITWORKS MY AIR TOOLS LIKE A DREAM. IT REPLACED,A SMALL PANCAKE COMPRESSER THAT I WAS USEING TO RUN MY NAIL GUNS I WOOD RECOMMEND THIS COMPRESSOR TO ANYONE WHO NEEDS A COMPRESSOR THAT WILL GIVE YOU ALOT OF BANG FOR YOU BUCK. Good Compromise - The compressor is very easy to set up and use. I am very pleased with the purchase. However, I don't have much space so a dedicated unit was out of the question. The space-saving vertical design and wheels works great for me.1 SCFM at 90 PSI should be sufficient for my needs; although a little more power would have been welcome. The compressor has a very solid feel and is very heavy. There is no way I could load it into the back of my truck by myself. The wheels are a little small and appear to be made of a hard plastic. They are adequate for moving the compressor around the garage, but would not work well on stairs or outside. Therefore, you have to get on your belly to open and close it. It is rather awkward, especially if you have a container underneath to catch the water. In my opinion the compressor is loud, particularly if you are in a closed room. However the rumble of the motor is much more tolerable than the high pitched whine of some of the other compressors I checked out. I have not experienced any electrical problems with breakers in my old house. In addition, buying from Amazon, instead of Grizzly is great because of the free shipping. It was delivered to my house by a freight company and I saw the invoice to Amazon was over $100. I don't think I would trust the shipment to UPS because the unit is heavy and some parts could be easily damaged. Unfortunately, it looks like Amazon has increased the price by $85 since I bought it.
found in CPFAC2600P's description: com Review
This Porter-Cable 2-horsepower, 6-gallon pancake compressor transports easily but has plenty of capacity and power--enough to support heavy use of brad and finish nailers and moderate use of framing nailers. This is an oil-free unit, and its advanced Teflon coating doesn't require maintenance--a big plus on the convenience scale. The 120-volt universal motor starts easily in cold weather and draws only 10 amps--so you won't have to worry about tripping breakers inside residential homes--and you can use it with an extension cord. Features include a high-flow regulator, an easy-to-read air pressure gauge, automatic thermal overload protection, an industrial-style quick-connect body in the air outlet, and a long-life motor with replaceable brushes. The compressor weighs 32 pounds and has a handle built into the motor housing, so it's relatively portable. This Porter-Cable is as convenient and easy to use as any compressor out there, and it's just about ideal for brad and finish nailers that are being used inside people's homes on a regular basis. --Jonathon Tudor
From the Manufacturer
This oil-free 2-hp pancake-style aircompressor has a new high pressure design that provides 28-percent more usable air! This allows more run time and less down time. The high-flow regulator keeps the tank pressure between 120 PSI and 150 PSI, allowing a greater reserve air capacity. The universal motor runs on standard household current and can be used with an extension cord. The oil-free pump allows for maintenance-free use as well as use on slopes without the risk of oil leakage. Lightweight for portability, this compressor has plenty of power to fire all brad and finishing nailers as well as moderate usage of roofing and framing nailers. Includes compressor, high flow air regulator and gauges, quick coupler, and instruction manual.8 HP Running
Built-in automatic thermal overload protection
Larger Easy to read regulated air pressure gauge
Universal, High-FloSM, push-to-connect coupler in air outlet
One year warranty
150 PSI - 10 gallon equivalent tank size as compared to conventional 125 PSI model
87 Dba
Oil-free pump design for durability and no maintenance
Long-life motor with replaceable brushes
High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
6 gallon tank supports heavy usage of stapler, brad and finish nailer, standard-to-heavy roofing and standard framing nailer
120 Volt, universal motor starts easily under low voltage conditions
Extension cord use without tripping circuit breakers
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual
SPECIFICATIONS
Lubrication: Oil Free
Gauges: 2
Quick Couple: 1/4" NPT
Weight (Lbs. PSI: 150
SCFM Air Delivery @40 PSI: 3.7
SCFM Air Delivery @90 PSI: 2.
Product Description
2 HP, 6 Gallon, Oil-Free Pancake AirCompressor, 150 PSI Maximum Tank Pressure, 3.6 SCFM @ 90 PSI 87 DBA, 15 AMPS, Built-In Thermal Over Load Protection, Hi-Flo Air Regulator With Quick-Connect Coupler, Regulated Pressure Gauges, Includes ASME Safety Valve, 1 Year Warranty.
found in CPFAC2600P's reviews: Solid little compressor, won't pop your breakers - I previously owned the Porter Cable 135psi, 3hp compressor but when I moved to my new house, with slightly low voltage, it was nearly impossible to use without popping breakers every time the beast fired up. This one works like a charm. It runs longer and more often than the old one but I don't have to run back and forth to the breaker panel. It's also about half the weight so if you need to move it often, this one is great. Used and abused and comes back for more - I have had this compressor for 5 years now and have had no proplems. I have used and abused this thing almost hoping that it breaks so I have a reason to buy a bigger one. The little round red monster just keeps kicking along. I couldn't begin to calculate the operating hours on it. It gets the most abuse when I shoot waterbased finish on the furniture I make, and since I don't need a whole lot of volume itworks fine. When it finally gives up I will go find a nice HVLP system, but they are very expensive. Good compressor for a good price - I've owned a large compressor for years and needed something that can easily be ported anywhere - the large one is nice, but combersome for small jobs. I just wanted something that fits in my car trunk, if I needed to do that. Originally I bought a similar cheaper competing unit from homedepot - it was cheap (=inexpensive but badly made, very noisy) and was brought back immmediately, since it was a useless toy. Stick with the brand names like Porter Cable - you get what you pay for.
I've had mine for about one year now without any problems.
This small compressor is actually used a lot more than my original compressor. It charges quickly and works well with nailers, etc.
I've tried running my pneumatic hammer and socket driver and it does work, but does cause the motor to run all the time.
Spraying paint I haven't tried and probably would not work well - it just doesn't have the air delivery. That is what my large compressor is used for.
It is an oil-less compressor - so it is relatively noisy but noise means power, no? :) .
item.gif border=0 width=9 height=11> Honda 5.5 HP GX160 Engine with low oil shut down item.gif border=0 width=9 height=11> Automatic idle down control item.gif border=0 width=9 height=11> Direct-drive design - no adjustments item.gif border=0 width=9 height=11> Lightweight - only 96 lbs. item.gif border=0 width=9 height=11> 12 cfm at 100 psi - 8 HP performance, 5.5 HP price
found in TG-550H's description:From the Manufacturer
The TG-550H is the worlds first 2 cylinder direct-drive compressor. The compressor is bolted directly to the engine flange which results in a lightweight, compact machine that out-performs anything in its class.) and with air delivery of 12.0 cfm at 100 psi it is the lightest weight and highest output 5.5 HP gas unit on the market. The lightweight 7-gallon wheelbarrow style tank makes for great portability and easy loading and unloading. Other features include automatic idle down, ASME safety valve, high flow 17-cfm regulator, and low oil shut down. The compressor never needs adjustment and air delivery remains contant, there is no loss of performance due to belt stretching or slippage.
item.gif border=0 width=9 height=11> 23 by 23 by 13-1/2 inches; 68-1/2 pounds; 1-year warranty item.gif border=0 width=9 height=11> Includes DEWALT synthetic compressor oil and pressure regulator item.gif border=0 width=9 height=11> Cylinder constructed of cast iron item.gif border=0 width=9 height=11> 4-1/2 cfm delivered at 100 psi; dual soft start valve for cold-weather starts; oil-lubricated pump item.gif border=0 width=9 height=11> 15 amp 2-3/4-horsepower 4-gallon oiled twin hot dog compressor with carrying handle
found in D55155's description: com Review
At just a foot high and less than two feet wide out of the carton, this compressor was quite a bit smaller than we expected, so to be fair, we quickly lowered our expectations. The joke was on us, though, because this little powerhouse just doesn’t quit, and we learned that you can’t judge a compressor by its size. Emglo’s half-century in the compressor business is evident in this model, and with a couple of small exceptions (we’ll get into that in a minute), we don’t think anyone could make a finer piece of air power.
Structurally, it’s top-notch. DeWalt/Emglo’s great new roll-cage shape protects your investment in the shop, in the truck and at the job site, and the gauges are easier to read than many we’ve squinted at over the years. It weighs in at around 60 pounds, and the way the handle’s designed, you can carry it much like a suitcase without overexertion. To let out any moisture that’s accumulated, it’s just an easy turn of the ball-valve tank drain, then just wrap the cord on its holder and you’re ready to go. Now, this may be a plus or a minus in your book, but we liked the fact that the compressor is factory set to power on at 100 psi an+d shut off at 120 psi, and the cycle time was under 15 seconds. We didn’t find it unusually loud, but we’re given to wearing hearing protection with tools such as this one anyway (and we hope you are, too.) It has air aplenty for two nailers at once, and with that fast recovery, the job will get done in no time.
If we had to say what we didn’t like, there are two items on that list: First, we thought the power switch would have been better seated on the front panel rather than the side, but that’s a miniscule complaint. What you do want to watch out for, though, is the proximity of the reset switch to parts that get searingly hot while in use. A little care will save you some pain.
In balance, this is one of the best compressor’s we’ve seen for the size, power, ruggedness and incredible portability it offers. Here’s to a great pairing of two great toolmakers.--Kris Jensen-Van Heste
Product Description
DeWalt's 2-horsepower, 4-gallon compressor features an oil-lubricated design with a cast-iron cylinder to guarantee job site durability. The new roll-cage design and integrated control panel protects the compressor and the controls from accidental damage. Carrying the compressor is easy, too: the flat design lets the user tote the compressor comfortably like a suitcase. The package comes with the initial fill of DeWalt synthetic aircompressor oil.
From the Manufacturer
This 4-gallon hand-carry compressor was designed to meet the tough demands of the job site. The handle is situated to allow the user to carry the compressor with one hand in a natural walking position. The roll cage and integrated instrument panel protect the compressor and instruments from damage. Comes with the initial fill of DeWalt's synthetic aircompressor oil.5 cubic feet per minute delivered at 100 psi, recovers in less than 15 seconds
New ergonomic design for easy portability
Protected components for maximum durability
Oil-lubricated pump allows for increased life
ASME-coded, 4-gallon, OSHA-recognized tank
Dual soft-start valves assist in cold weather startup
Ball valve drain allows for quick and thorough tank draining
Cast-iron cylinder enhances pump life
CSA approved
Specifications
Drive: direct drive
Horsepower: 2-3/4 max hp
Tank size: 4 single ASME tank gallons
Power supply: 120-volt AC, 15 amps, 60 Hz, 2-pole induction motor
Cubic feet per minute at 100 psi: 4.
Includes
DeWalt synthetic compressor oil
2 universal quick couplers
Regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty
Product Description
2 HP, 4 Gallon, Electric Single Tank Hand Carry Compressor, 4.5 CFM @ 100 PSI, Ball Tank Drain Valve Allows For Quick & Thorough Draining, Oil Lubricated Pump Allows For Increased Life, Cast Iron Cylinder Increases Life Of The Pump, Dual Soft Start Valves Assists In Cold Weather Start Up, Improved Ergonomics Assists In Carrying, Protected Components For Increased Durability, ASME Coded 4 Gallon Tank Is OSHA Recognized, CSA/NRTL Approved, Tool Length: 21.
found in D55155's reviews: Great Performance - Dewalt/Emglo designed this compressor around portability. It doesn't get any easier than this and weight is not an issue. I gave 4 stars because of the awkward accessibility to the tank's drain valve.there is very little room in the opening to not only grasp and turn the valve, but if the valve is opened too quickly, be prepared for full discharge of air. Another design area that could use improvement is the location of the two pegs/studs for stowage of electrical cord in order to move compressor. With cord wrapped around the two pegs, natural movement of compressor is to roll it onto it's side in order to pickup and carry with one hand. When cord is stowed it extends outside the compressor's frame therefore, when compressor is rotated onto it's side the wrapped cord comes into contact with the ground resulting in compressor bearing it's weight on cord. Outside of two design improvements, aircompressor is a great performer. it's too much! - This is a great compressor. It's quiet with plenty of power and the portability is great. plus all the dials are in the right place with easy visibility. however there's the exception of one valve and a reset switch. There's only an inch or so for clearance for the valve and I could only get to it with a screwdriver. Secondly, the reset switch is located too close to the cylinder housing and cooling system which are about as hot as the sun when the machine is running. plus the switch itself is a little tiny. certainly too small for the average construction guy with gorilla hands. I've one additional bad thing to say and that is that DeWalt could use some better paint to go with such a great looking compressor! there's already rust on my cylinder housing and I only purchased the unit a week ago! But overall, I would recommend it highly. namely because it's so dependable, powerful, innovative and the recovery time is great. Major quality control and service issues - I am a contractor and have had this compressor for three years. This is the worst compressor I have ever owned. I have had too many problems with this machine. The main problem is that the unit will not start up at the beginning of the day. It starts very slowly and pops the breaker about a dozen times before the motor reaches full speed (rpm), then it runs fine until it cools down and the problem starts again. I have had the regulator, cold start valve and check valve assembly replaced, but nothing has had any effect. I should have just replaced the compressor for the headache it's been. If you want a professional quality machine try the Thomas T-2820. NOT for everyone !! - Be realistic and really think about your needs in a compressor - because this one is meant for low-volume work.
Pros: Very well built with great fit and finish of every component. Controls and drain valve are positioned well and work perfectly.
Factory set pressure valve set to kick on compressor at 100psi and turn off at 120psi - which means that any fair amount of use will cause this sucker to go on-off-on-off-on-off almost constantly!
Bottom Line: DO NOT get this if you need a generous supply of air (for blow nozzles, production cabinetry, house framing, paint sprayers, etc.)
Go ahead and get one if you need a portable, professional quality, low-volume air supply (for continuous finish nailing or occasional large gun use)
This would be the perfect tool for a handyman who needs occassional yet reliable air from house to house.
I'd have given it 5 stars - but the factory sealed presets for powering on and off are way to close!. A pleasure to use - After putting a Porter-Cable pancake unit through its paces for two years, the unit developed an annoying tendancy to run continuously until it was manually shut off. The Porter-Cable service center recommended I continue to use the machine until it completely failed, as servicing it could be cost-prohibitive. What a nice piece! It is very well constructed, runs smoothly, carries easily, and has plenty of capacity for any framing or finish tasks I've thrown at it. I'm willing to say that it runs quieter than the P-C pancake unit, but that may be because the P-C had some cylinder wear and blow-by issues. The only item I found could use more thought was the routing of the power cable from the switch box to the motor - somewhat vulnerable, yet still protected by the base of the unit. Oh, and the clean ball-valve drain set-up is a dream after the previous brass screw type that had a tendancy to seize. No bad feelings about P-C products, the pancake compressor just gave up the ghost early and had to be replaced with a more capable unit - so far the Dewalt seems like a super piece. Best investment yet - Itworks well with my framing nailer also. I even purchased a reconditioned unit and it has treated my well. It will not keep up with a blower attachment, but I did not expect that it would. I just use short blasts of air and let the unit catch back up if I want to dust something off. I framed a couple 10x12 sheds, and a couple of interior walls with it and it has no problem. Little heavy, but for long distances I have learned to grab the tank like a heavy piece of fire wood with the unit up to your chest and it is not bad. Draws 15 amps so do not use an extention cord unless it is 10 gage.(longer air hose is better) . I'm pleased with it and I've actually used it; A LOT. - Used it for brads, framing, roofing, ratchet and just blowing off stuff. Works flawlessly. A tad noisy, but what compressor isn't. I got it stuck in my shop under a fixed bench on the second shelf. This compressor drives 3+ inch nails no problem. Its so light I can pick it up with 1 hand. May not be the most powerful in its size, but so what? I keep 2 lines connected all the time so I can use it for blowing off wood/sweeping the floor/dusting the shop/ or busting lugs on wheels, building frames, nailing up trusses, installing subflooring, etc. But the kicker is I can pick it up an take it with me anywhere. Of course I have to mention the 1andonly dislike(thats the on/off-switch location). Emglo (Dewalt) compressor - I have had this compressor for about 6 months or so. I got this compressor when i had to put baseboards and crown moldings in a house. I looked at both the Hitachi and Dewalt compressor for about 4 months before i got it. I like the design of the old Emglos a lot better with the twin stacked tanks but I can live with this design. The reason why I bought this one over the Hitachi is it has a little more CFMs at 100psi and i have known the reputation the Emglos carry with them from seeing them on the job regularly. It Purs every time it goes on and can be on practically the whole day and not bog down. This compressor also has a roll cage to protect the motor that is nice and can come off easily to access the motor. Overall this Emglo I mean Dewalt works really well and I'm pleased with it. A very good compressor - I replaced my hotdog style oil-less compressor when the connecting rod decided to break.
While at the local hardware store I saw the DeWalt D55155 compressor and thought, "geez, you could not miss that compressor!" The bright yellow paint made this compressor stand out and then that's when I saw the name Emglo. I have had very good experience with Emglo and know their equipment is top notch. It has a 4 gallon tank, two connectors on the front, an easy to use regulator and gages that are protected by the heavy roll frame and face plate. This compressor also has a ball valve on the bottom of the tank for easy draining. Those "T" shaped valves always had the tops broken off and were hard to operate. This ball valave is also inside the frame as is every component of the compressor.
I have tossed it into the back of my truck along with other stuff and it has managed to live through just about everything I can toss at it. It also has a large handle on the front for carrying and it's big enough to get two hands on it. Or use the frame to carry it around. Does not seem that heavy (I think it weighs about 60 pounds). All I know it could easily handle the framing and roofing nailers I had connected to it.
I also like the fact that it turns on at 100 and then off at about 125 psi. It takes about 10 seconds to go from 100 to 125 psi. I run a framing nailer and I need 100 psi all the time!
About the only thing I do not like about it is the circuit breaker. It's mounted inside the roll cage near the copper line running from the compressor to the tank.
Some have complained it's loud. It might be, but, I put the compressor away from where I'm working so this is not an issue.
As with any compressor you have to keep the extension cords short. I use a 12 gage, 75 foot cord and it runs just fine. The voltage sag does not seem to bother it.
So, would I buy this compressor again if I had to? You bet!. Yes! - He is right on in every detail of his positive description, including the couple of little details that could use improvement. But for its purpose, this hunk of metal is about as close to perfection as it gets. It is a heavy lugger of a unit, but you will be able to carry it one handed werever you need it within reason. Bigger than it looks in the illustration online or in the catalog. Roll cage works well--behaves well in the back of the pickup and handles well on the floor, and it has good balance at the carry. Controls are intuitive, easy, highly visible. Ideal compressor for one or two people on cabinet, finish and trim work, or for any work-alone carpenter from framing to finish. Cycles quite a bit, but for its size and power that is reasonable. If you are going to work in the same room with it, carry ear protectors. It may not be as loud as some, but it is loud enough that ear protectors are a very good idea--especially for us vets with blown out ears. Never seen it overload a 15 amp circuit, even with other tools running intermittently on the same circuit--chop saw, battery chargers, circular saw, etc. I work alone a lot, and I have found that this is all the compressor I need. Barring any unfortunate accident, it should last me a long time. On the other hand, if I had a crew, I would not worry about this compressor's standing up to their abuse. DeWalt takes a classic to a new level - Last yearI spent many months researching a replacement for my ailing Campbell-Hausfeld oilless compressor. Originally I figured the CH had a higher air output, needed no oil changes,would work on slopes and start in cold weather.After forking over the big bucks and putting it to work for DeWalt's 30 Day trial period I couldn't believe I'd gone so long without this compressor. The unit has loads of features and advantages. 1) First of all the Emglo name on the unit reassured me that I was getting a tool built by the industry leader with a great reputation for tough, dependable compressors. The first day on the job proved it with quick cycling times and ample air at all times. The unit just purrs and runs smoothly.
2) Portability. I do a lot of work in luxury high rises and I've often left the compressor at home rather than drag it down endless corridors. This unit carries like a briefcase (a 60 pound one) with an ergonomic handle and good balance. The unit's flat design makes it easy to bungee tie to a light weight luggage carrier .It can carry the whole unit with hoses and nail guns. I've paid for the compressor already in labor savings by bringing it to every trim job. Let's face it, this is a sexy looking unit. I've had othe craftsmen come over and ogle the compressor and ask questions about it, but mostly admiring it. Customers have commented on it, how quiet it is and how professional it looks.I am percieved as a serious craftsman based on my setup (along with my Senco SFN-40)which is good for referrals.
In short, this is a serious tool for the professional contractor with loads of power(delivered air), durability, great design and looks. My only complaint is the air release lever, an otherwise solid unit mounted on the underside of the tank. The opening is too narrow for your hand and the sharp stream of air can actually cut your skin. In addition the compressor shoots out small chunks of ICE from the tank creating dangerous projectiles that will cut your hand or riccochet into your eye. Don't know why it does that but just beware and open the valve SLOWLY. Finally, I have a compressor that won't roll around in the back of the truck knocking off gauges and connections as I drive through the city. Hats off to DeWalt and Emglo for a match that combines legendary durability with great design. Good machine, but some packaging and assembly issues - Overall positive comments here and price led me to purchase the D55155. To my dissatisfaction, it arrived with a broken air filter and some loose items rolling around in the air tank. No, it wasn't the air filter parts, it was something metalic actually inside the closed tank! Amazon referred me to DeWalt who referred me to my local service center. DeWalt was nice enough to agree to send a replacement filter, but I returned the unit to Amazon because of the loose items in the tank.
Thanks to Amazon's incredibly fast and hassle-free process for returns, I had my replacement compressor less than a week later. Unfortunately, it too had a broken air filter. I think it's a design issue with the end of the filter rather close to the manifold - sharp jolts such as dropping the box could lead to contact. But since everything else was fine, I bought a filter locally (DeWalt's replacement has yet to arrive) for $10 and kept the compressor. Another surprise with the second shipment was the inclusion of oil, a dipstick, instructions to add oil, and a product manual. This was not in the first shipment and is REQUIRED before starting the unit which is something that as a first-time compressor buyer, I would not have known to do. Would have assumed it would ship with the oil in it.
Of course the point of all this is to let you the prospective buyer know that there could be a few headaches involved with getting this machine. An earlier poster cited the recent transfer of this fabrication to Mexico. That kind of transition can lead to inconsistencies in fabrication and packaging like I have experienced, but I'm hopeful that the core design and construction of the pump and tank is solid and I like the way the machine works so I'm keeping it.
I recommend this machine but please check over your unit carefully when it arrives and call DeWalt's parts center to get a free replacement filter if that's all you find wrong.
