Air Compressor Installation - 1
16 Gauge Finish Nailer 18 Gauge Brad Nailer Compressor | Factory-Reconditioned Porter-Cable CFFN250NR
Porter-Cable CFFN250NR
$540.00
by Porter-Cable

52 pounds; 1-year warranty
Includes brad nailer, finish nailer, compressor, vinyl air hose, pipe joint tape
Heavy-duty steel construction
Comes with 16-gauge finish nailer, 18-gauge brad nailer, and 6-gallon, 10 amp, oil-free pancake compressor
Factory-reconditioned finish nailer and compressor combo kit

found in CFFN250NR's description: You can finish any woodworking project with this limited edition kit that includes both a finish nailer, brad nailer, and compressor. Ideal for on-site trim work, architectural woodwork, and casework installation, this finish nailer and compressor kit from Porter-Cable is perfect for the finish trim installer. Includes: 1 Porter-Cable 16 gauge, 3/4"�2-1/2" finish nailer kit (FN250B), 1 Porter-Cable 18 gauge, 5/8" �1-1/4" braid nailer kit (BN125A), 1 135 psi, 2hp, 6 gallon pancake style compressor, 1 300 psi, 25' vinyl air hose, 1 air hose fitting, 1/4" male plus coupler, Pipe joint tape.
7-1/2 Horsepower 80 Gallon Oiled Vertical Gas Compressor with Electric Start | Maxus EX8404
Campbell Hausfeld EX8404
$1,699.00 >> $1,697.36
by Campbell Hausfeld

Provides easy installation in work environment
Highest air flow in the market
Cast Iron cylinders and crankcase for durability and long life

found in EX8404's description: This compressor also offers a pre-wired magnetic starter, 80-gallon ASME code tank, 240-volt single phase motor.

Product Description
mfr: Campbell Hausfeld Air Products Campbell Hausfeld takes performance to the max by launching Maxus, a new brand of heavy-duty powered equipment for contractors and serious do-it-yourselfers.

Cast Iron Two Stage Oil Lubricated Compressor - Commercial Model - 7.
Finish Nailer, Brad Nailer, Narrow Crown Stapler and Co | Factory-Reconditioned Porter Cable CFFN251TR
Porter Cable CFFN251TR
$329.00
by Porter Cable

49 pounds; 1-year warranty
Includes 2 nailers, stapler, compressor, air hose with coupler and plug, oil, manuals
Rugged plastic housings on tools; cast-iron compressor
Includes FN250B finish nailer, BN125A brad nailer, NS100A stapler, and 6-gallon pancake compressor
Factory-reconditioned nailer, stapler, and compressor combo kit

found in CFFN251TR's description: com Product Review
Ideal for onsite trim work, architectural woodwork, and casework installation, this combo kit from Porter-Cable includes a finish nailer, brad nailer, narrow crown stapler and compressor.

First, the compressor: The unit blasts out an impressive 150 maximum psi for driving more nails than traditional 135 psi compressors. Running on standard household current, this 120-volt electric compressor also cranks out 2.6 standard cubic feet per minute at 90 psi for quick compressor recovery time and faster nailing. Weighing just 34 pounds, the compressor is easy to transport from project to project. And, two quick-connect couplers let the compressor power two nail guns to at the same time. Olson

What’s in the Box
6-gallon, 150 psi compressor with two couplers; 1-1/4-inch, 18-gauge brad nailer; 2-1/2-inch, 16-gauge finish nailer; 25-foot air hose with coupler and plug; 2,000 fasteners, nailer oil, canvas carry bag.

13 Amp 2-1/2 Horsepower 4 Gallon Oiled Twin Hot Dog Compressor | Makita MAC2400
Makita MAC2400
$460.00 >> $249.00
by Makita

19-3/8 by 18 by 18-3/4 inches; 77 pounds; 1-year warranty
1/4-inch brass Makita universal coupler
Cast-iron pump and roll cage construction
4.2 cfm delivered at 90 psi; low 1,720 rpm extends motor life and lowers noise
13 amp, 2-1/2-horsepower, 4-gallon oiled twin hot dog compressor with handle

found in MAC2400's description: From the Manufacturer
The new MAC2400 - Twin Stack air compressor by Makita is blowing away the competition.3 amps to operate, a lower 1720 RPM rating and a heavy duty Intake Air Filter system like no other, its easy to see how this unit will out last and outperform everyone else. Large automotive style industrial air filter for increased air intake and greater efficiency.
found in MAC2400's reviews:
Ditto! great machine - My first compressor and I feel wise for getting this one.

I've been using it for hardwoord floor installation and so far it's
been flawless.

6 Amp 3/4 Horsepower 2 Gallon Oil-Free Hot Dog Compressor | Thomas Compressors T-635HD
Thomas Compressors T-635HD
$369.00 >> $279.00
by Thomas Compressors

Long life, contractor quality machine - rated for continuous use
Low amp draw - works on 15 amp circuits and with extension cords
Versatile - offers framing, roofing or finish gun capability
3/4 Horsepower - delivers 1.7 cfm at 100 psi.
Lightweight and portable, only 26 pounds

found in T-635HD's description: From the Manufacturer
Thomas Industries T-635HD is a quiet running (69-decibel) 3/4 HP compressor that is both portable and versatile. Other uses include, tire inflating, painting, airbrushing, small air tools, and winterizing water lines and RV's.
found in T-635HD's reviews:
kinda load - Thomas has good tech support - Received as expected, actually a day early thanks Amazon, the compressor is very well packed for shipping.5 hours, it will not hold air.
I'm now trying to get a reply from Thomas on where to take it or send it back for repair,I would like to resolve this as the compresser is a great size for one gun use.
Thomas Tech did return my call - worked with me on phone to try & fix problem, he overnighted the replacement part and upon installation everything is up & running - good tec support, this has caused it to quiet a little.

18 Gauge Brad Nailer Compressor Combo Kit | Porter-Cable CFBN200A
Porter-Cable CFBN200A
$423.00 >> $175.00
by Porter-Cable

1 year limited warranty
Complete kit with quick-connects, 25' 150 psi air hose, thread sealing tape, nailer case, and wrenches
Oil-free compressor produces 3.7 scfm at 40 psi and 2.7 scfm at 90 psi
Nailer features cushion grip, depth of drive, quick-release nosepiece, and directional exhaust
Professional nailer shoots 3/4" to 2" 18 gauge brad nails

found in CFBN200A's description: Here they've packaged their hard-working 18-gauge brad nailer with its power source--a 15 amp, 120-volt, 6-gallon compressor driven by a 2-horsepower oil-free motor. Fill up the nailer with standard 18-gauge brads from 3/4 inch to 2 inches long, hook up, and you're ready to install baseboards, chair rails, moldings, even make quick work of those wooden craft items like country shelves and vegetable bins. The kit comes with quick connects, 25 feet of 150 psi air hose and thread sealing tape.
found in CFBN200A's reviews:
Perfect for my needs. - I have used it for molding installation and have purchased two additional nailers to use with the compressor: a framing nailer and flooring stapler. The compressor will cycle more often because of its small capacity but that is not a problem as long as you are near an electrical source.
15 Amp 2-1/2 Horsepower 8 Gallon Oiled Wheeled Single Hot Dog Compressor | Campbell Hausfeld HL5501
Campbell Hausfeld HL5501
$169.00 >> $169.99
by Campbell Hausfeld

Delivers 4 avg scfm @ 90 psi
Wheels and handle for easy portability
Oil-lubricated cast iron cylinder pump for long lasting, reliable performance
Large, 8-gallon tank for extra storage

found in HL5501's description: com
An air compressor isn't one of those must-have tools for the homeowner—-that is, until you've used one. The HL5501 has plenty of power for a stapler or nailer; imagine how quickly a chair rail could go up. Because it's a smaller unit, its air delivery is lower, so make sure you check the air requirements of the tools you intend to use it with.--Kris Jensen-Van Heste

From the Manufacturer
Ideal for inflating balls and tires, nailing fences, stapling protective wrap, and more, this 8-gallon air compressor offers a whole new world of around-the-house convenience. A handle and wheels make this compressor highly portable for doing jobs in the basement, on the roof, and in the yard. You'll get those occasional home repair jobs done more quickly and with less expensive with this Campbell Hausfeld compressor and air tools.

Compared to electric power tools, Campbell Hausfeld air tools save you both time and money. The initial cost of an air tool is significantly lower than its electrically powered counterpart, and the average life is longer. Air tools also deliver more torque and higher revolutions-per-minute than electric tools, helping you complete your jobs more quickly and effectively.

FEATURES

  • Large, 8-gallon tank for extra storage
  • Oil-lubricated cast iron cylinder pump for long lasting, reliable performance
  • Wheels and handle for easy portability
  • Delivers 4 avg scfm @ 90 psi

SPECIFICATIONS

  • Delivers 4 avg scfm @ 90 psi



Product Description
8 Gallon, 15A Cast Iron Air Compressor, Oil Lube Pump With 2.
found in HL5501's reviews:
Sturdy, portable, cheap oil-lubricated compressor... But noisy! -

Let me start by saying that I can't live without an air compressor. Those of you who don't have one have no idea how much you'll use it and what an integral part of any household project or repair it will become when you finally have one. That being said, let me explain why I bought this particular compressor and what I think about it thus far.

Until recently, I had an 8-gallon oil-free compressor that was handed down to me from my dad after I bought him a large stationary garage unit about 6 years ago. This thing lasted about 13 years with very regular use with a few repairs over the years. This is absolutely unheard of with an oil-free compressor. In order to replace the blue tarp roof provided by FEMA with some actual shingles, I will need a compressor to power my roofing and framing nailers. Portability and reliability are important factors in order to assist with the reconstruction efforts of the community once the repairs to my home are complete. This is why I decided on an oil-lubricated compressor. Although I had great success with the aforementioned oil-free compressor, I do understand that this was more the exception than the rule. It is hard to find an oil-lubed compressor that is both portable and affordable., making them very difficult to get in and out of your truck/car by yourself, let alone getting them up a flight of stairs. I had to use a tap & die set to cut new threads in order to complete the wheel installation. This compressor does not come with oil, even though the instruction manual says "only use the oil that was shipped with the compressor." The other thing that you will run into is that it does not come with a coupler to connect an air hose to. Although this is very common for air tools not to come with the required fittings to connect it to a hose, there is one difference here. I have never seen a quick-disconnect air hose connector (the hose end that has the sleeve to release the connection) with male threads on it. (a brass pipe nipple for you plumbers out there)

Use:
The Campbell Hausfeld HL5501 overall seems to be a very good compressor. If you are looking into this compressor because of the reduced noise level that oil-lubed compressors are known for, then you will be disappointed. This compressor is every bit as loud as any comparable oil-free unit.

Conclusion:
I would recommend this compressor to the handy home user that wants the reliability and longevity of an oil-lube compressor, but doesn't want to spend a lot of money. I would not recommend this compressor if the noise level is a big issue, but be prepared to spend a lot more money for a belt-driven unit.

HipShot 2 Amp Tankless Shoulder Strap Compressor | Palmgren 92102
Palmgren 92102
$129.00 >> $39.99
by Palmgren

Auto shutoff/restart
Operates at 115 PSI
Weighs 7.5 lbs
Use with pneumatic nailers & staplers

found in 92102's reviews:
utterly useless - At the end of an installation, we need to shoot about 20-25 18 gauge brads into the casing around a door. We'll continue to use a reliable Porter Cable compressor for our jobs and return this piece of junk.
Air Compressor Installation - 1

Porter-Cable (27)
Campbell Hausfeld (18)
DeWalt (14)
Emglo (10)
Thomas Compressors (9)
Bostitch (9)
Makita (6)
Hitachi (5)
Porter Cable (4)
Grip Rite (3)
GRIP-RITE (2)
Palmgren (2)
Xantrex Technologies (1)
Black & Decker (1)
Ingersoll Rand (1)
Wagan (1)
Stanley Hand Tools (1)
AccuSet (1)
Q Industries (1)
Senco (1)

Other Searches:

Air Compressor Installation
©2006