32 pounds; 1-year warranty Includes compressor, ASME safety valve, regulator, gauges, 1/4-inch quick coupler, manual Cast-iron construction Provides 3.7 cfm at 40 psi and 2.6 cfm at 90 psi; air-regulator and quick-connect coupler 15 amp, 2-horsepower, 6-gallon oil-free pancake compressor; handle; built-in thermal overload protector
found in CPFAC2600P's description: com Review
This Porter-Cable 2-horsepower, 6-gallon pancake compressor transports easily but has plenty of capacity and power--enough to support heavy use of brad and finish nailers and moderate use of framing nailers. Features include a high-flow regulator, an easy-to-read air pressure gauge, automatic thermal overload protection, an industrial-style quick-connect body in the air outlet, and a long-life motor with replaceable brushes. The compressor weighs 32 pounds and has a handle built into the motor housing, so it's relatively portable. This Porter-Cable is as convenient and easy to use as any compressor out there, and it's just about ideal for brad and finish nailers that are being used inside people's homes on a regular basis. --Jonathon Tudor
From the Manufacturer
This oil-free 2-hp pancake-style aircompressor has a new high pressure design that provides 28-percent more usable air! This allows more run time and less down time. The high-flow regulator keeps the tank pressure between 120 PSI and 150 PSI, allowing a greater reserve air capacity. Lightweight for portability, this compressor has plenty of power to fire all brad and finishing nailers as well as moderate usage of roofing and framing nailers. Includes compressor, high flow air regulator and gauges, quick coupler, and instruction manual.8 HP Running
Built-in automatic thermal overload protection
Larger Easy to read regulated air pressure gauge
Universal, High-FloSM, push-to-connect coupler in air outlet
One year warranty
150 PSI - 10 gallon equivalent tank size as compared to conventional 125 PSI model
87 Dba
Oil-free pump design for durability and no maintenance
Long-life motor with replaceable brushes
High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
6 gallon tank supports heavy usage of stapler, brad and finish nailer, standard-to-heavy roofing and standard framing nailer
120 Volt, universal motor starts easily under low voltage conditions
Extension cord use without tripping circuit breakers
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual
SPECIFICATIONS
Lubrication: Oil Free
Gauges: 2
Quick Couple: 1/4" NPT
Weight (Lbs. PSI: 150
SCFM Air Delivery @40 PSI: 3.7
SCFM Air Delivery @90 PSI: 2.
Product Description
2 HP, 6 Gallon, Oil-Free Pancake AirCompressor, 150 PSI Maximum Tank Pressure, 3.6 SCFM @ 90 PSI 87 DBA, 15 AMPS, Built-In Thermal Over Load Protection, Hi-Flo Air Regulator With Quick-Connect Coupler, Regulated Pressure Gauges, Includes ASME Safety Valve, 1 Year Warranty.
60 pounds; 1-year warranty Includes DEWALT synthetic compressor oil and pressure regulator Cylinder constructed of cast iron 4.1 cfm delivered at 90 psi; shut-off valve at line and auto reset 14-1/2 amp 2-horsepower 4-gallon oiled twin hot dog compressor with carrying handle
found in EC12's description: com
Hitachis 2-horsepower compressor is one of the hardest-working units on the market.1 cfm of free air at 90 psi--enough to easily run two tools at once. Because of its compact size and trim weight, its the perfect compressor for the home do-it-yourselfer, but taking into account its power and portability, contractors will love it, too.--Kris Jensen-Van Heste
From the Manufacturer
This Hitachi aircompressor is powered by a 2 hp, 115-volt direct-drive motor and oil lube pump at 3,450 rpm.1 cfm of free air, at 90 psi.
From the Manufacturer
The Hitachi EC12 aircompressor is powered by a 2-horsepower, 115-volt direct-drive motor and oil lube pump at 3,450 rpm. It delivers 4 cubic feet per minute of free air at 90 psi.2 cubic feet per minute of free air
Specifications
Horsepower: 2
Amps: 15
Speed: 3,450 rpm
Air displacement: 8. Oil lube single piston compressor type, line regulator with gauge, direct drive electric motor, suction cup feet for extra stability, O-ring on draincock makes valve easy to open and close and resists stripping, vertically stacked twin tanks.
found in EC12's reviews: Affordable and hard working (residential construction) - Good airflow and not a power drain. Has powered two framing nailers but need to give compressor a breather when going fast. Great airsupply for the blower used for cleaning tools of sawdust.
86 pounds; 2-year limited warranty Includes compressor, mobility kit, ASME safety valve, manual Cast-iron construction 12 amps; 150 psi, enough to operate 2 nailers at once; roll bar to protect motor and pump 2-1/2-horsepower 4-1/2-gallon oiled wheeled single hot dog compressor
found in C3551's description: If you're a contractor looking for the right compressor, you've found it.--Kris Jensen-Van Heste
From the Manufacturer
Why lift when you can roll? The Job Boss Compressor comes equipped with a mobility kit for job site portability.5 gallon, Oil-Lube contractor style compressor is packed with features youll like. The High-flo air regulator and 2-port removable console are winning combinations for contractors looking for performance and versatility. This compressor is designed with a removable console for maximum mobility and air pressure.5 HP single tank aircompressor
Oil-lube aircompressor for maximum durability
150-PSI tank pressure for longer tool run time,
Quieter motor is easy on eardrums
120 V/ 60 hertz/1 phase motor
Two pole, 3450-RPM capacitor start induction motor for maximum air delivery
Includes 1-year limited warranty on parts and accessories
SPECIFICATIONS
150-PSI tank
3450-RPM capacitor start induction motor
8 oz. oil capacity
Product Description
The Job Boss Compressor comes equipped with a mobility kit for job site portability.5 gallon, Oil-Lube contractor style compressor is packed with features youll like. The High-flow air regulator and 2-port removable console are winning combinations for contractors looking for performance and versatility.5 gallon, mobile, contractor-style, single tank aircompressor. 2-port removable console to allow remote air regulation and higher pressure closer to the job site.5 gallon storage capacity air tank supports heavy use of brad nailers, staplers, and finish nailers; moderate use of roofing and framing nailers.5 gallon 150 PSI portable aircompressor, Mobility kit, ASME safety valve, and Operator manual.
found in C3551's reviews: Good idea, but a bit more durabilty would be nice - I've been using this compressor for about 2 years of daily remodeling work in Colorado in all weather conditions. I bought it because I was tired of lugging around other compressors that didn't have wheels. The rolling design of this compressor is very good because it can easily go up and down stairs as well as over typical construction site obstacles.
After a year of use the motor kept tripping breakers, so I took the compressor in for service and it received a new compressor and motor.
I work on job sites that have ancient compressors that continue to function flawlessly (but they're really heavy to move around), so I'm a bit worried by the problems I've noticed in only 2 years of use.
Because this compressor is oil lubricated, it does get sluggish in the winter. It also cannot supply as much air as the oil-free version. A trim subcontractor I know has the oil-free version and he has to rebuild his compressor annually with a $40 repair kit, so oil free isn't entirely without issues.
If you already have a compressor you like, I'd bolt some good wheels onto it and weld a nice handle onto the frame.
Dual voltage feature allows easy switching from 120- to 240-volt operation Dual control feature allows start/stop or constant run operation Low profile design for easy maneuverability Twin cylinder, cast iron, oil lubricated pump 6.5 cfm @ 100 psi for quick recovery
found in D55570's reviews: Nice Unit - This aircompressor, like most DeWalt tools is a great piece of equipment.
The compressor will run smoother on start/stop operation if ran on 220V. They have the original Emglo,just a different name due to Dewalt purchasing the Emglo name for non industrial units.
I'm very pleased with the DeWalt D55570 compressor and Amazon's service.
Built-in emergency light for illumination at home or on the road Vehicle jumper cables 250 psi aircompressor for inflating tires and sports equipment Operates 115-volt AC or 12-volt DC products anywhere Provides up to 300 watts of AC power
found in 852-1840's reviews: Does what it was made to do - They put a small compressor on it and it works fine for emergencies, but it's not meant to inflate tires all the time like a Campbell-Hausfield 10-hp dual-stage compressor with 50-gallon tank, it's an emergency convenience, and that's the point that should be remembered. In other words, read the power-rating on the appliance and look at the power rating of Xantrex, if the appliance meets or exceeds the rated load capacity of the Xantrex, don't plug it in, it isn't going to magically supply more power than it's capable of. If you want to run your TV, air-conditioner, hot-water heater, well pump, washer/dryer, dishwasher, home theater system, or refridgerator, then buy a gasoline powered generator instead.
Includes 1 year limited warranty on parts and accessories Two pole, 3450 RPM capacitor start induction motor for maximum air delivery 150 PSI tank pressure for longer run time, 90 dBA, 120V / 60 hertz/ 1 phase Oil-free pump design for durability and maintenance 3.5 HP (peak) 1.6 HP (running) 4.5 gallon single tank aircompressor
found in C3150's reviews: It's a worker - I bought this compressor a few days ago for my small remodeling company.
I am currently growing and needed a larger compressor for the job site, as all I was using was a pancake compressor from porter cable, and it had a hard time keeping up with the heavier demands I was putting on it.
I had looked at alot of compressors from emglo (dewalt) and others. I also looked at the specifications as I wanted a compresor that would have fast recovery, and high air presure for driving nails in older existing framing. The compressor had no assembly reqired, and was easy to remove from the box. This compressor is an animal. The recovery is the fastest I have seen on any compressor out there. It is a litle loud, But we fixed that by moving the compressor to another room, and removing the regualtor panel and putting it into the work area. I wasn't sure I would use this feature, but it is great, as you have your airsupply and regulator right where you are working. ( It's not light )
This compressor by far exceeds what I expected it to do.
One Year Warranty Convenient control panel has regulator, gauge, and two quick connect outlets Higher tank pressure provides more usable air per tank re-charge New high-pressure design keeps tank pressure between 110 and 135 PSI 3 HP induction motor delivers 7.7 SCFM at 40 PSI, 5.5 SCFM at 90 PSI
found in CPF23400S's reviews: Fantastic Compressor - I do crafts and wanted a compressor to replace my old one when it died. I was told by others that none of these smaller compressors would do that. I decided that I didn't have money enough to get an industrial comprssor, so went ahead with this one. No problem ! ! ! I could get most of the nuts off of one tire before the compressor would come on again. Perhaps this compressor wouldn't do for a mechanic, but for someone who changes their own tires, it does just fine. It is noisy, but I don't think any more so than any other compressor.