Ball valve drain allows for quick and thorough tank draining Dual voltage feature allows easy switching from 120 to 240 volts Dual control feature allows start/stop or constant run option Twin cylinder, cast iron, oil lubricated pump 8.4 cfm delivered at 100 psi with 17-gallon tank
found in D55585's description:From the Manufacturer
You will never run short of air again with this 2-horsepower electric wheeled compressor supported by an ASME-coded 17-gallon OSHA-recognized tank. The user can quickly and completely drain the compressor by the ball valve drain, which won't clog like other models that use needle valves. The D55585 includes DeWalt's synthetic compressor oil and a 3/8-inch NPT pressure regulator.
Includes
DeWalt synthetic compressor oil
3/8-inch NPT pressure regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.
18-1/2 by 15 by 16-3/4 inches; 60 pounds; 1-year warranty Includes DEWALT synthetic compressor oil and pressure regulator Cylinder constructed of cast iron Delivers 3.2 cfm at 100 psi; features overload protection to eliminate risk of motor damage 14 amp 2-1/2-horsepower 4-gallon oiled twin hot dog compressor with carrying handle
found in D55151's description:From the Manufacturer
This versatile compressor can perform a multitude of jobs, from roofing to finish to trim to home/hobby applications. The compressor delivers 3. Includes 3/8-inch regulator and initial fill of DeWalt synthetic aircompressor oil.
Includes
DeWalt synthetic compressor oil
Pressure regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty
Product Description
Portable electric powered compressor with 2 HP, high output motor.
Low profile design and pneumatic tire for mobility Automatic idle control for reduced fuel consumption Ball drain valve allows for quick and thorough tank draining Twin cylinder, cast iron, oil lubricated pump for durability and reliability 5.5 HP Honda GX gas engine provides proven reliability and durability
found in D55270's description: The automatic throttle control allows the unit to idle and conserve fuel when air is not required. The D55270 comes complete with the initial fill of DeWalt synthetic aircompressor oil.
Includes
DeWalt synthetic compressor oil
3/8-inch NPT pressure regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty
Product Description
5.5 HP, 8 Gallon, Compressor Powered By A Honda GX Gas Engine With Proven Reliability & Durability, 8.9 CFM @ 100 PSI, Automatic Idle Control For Reduced Fuel Consumption, Low Oil Shut Off Provides Greater Engine Protection, Twin Cylinder, Cast Iron, Oil Lubricated Pump With Emglo's 50 Years Of Proven Durability & Reliability, Ball Valve Drain Allows For Quick & Thorough Tank Draining, Low Profile Design For Easy Maneuverability, Pneumatic Tire Improves Worksite Maneuverability, Includes: Dewalt Synthetic Compressor Oil & Pressure Regulator.
32 pounds; 1-year warranty Includes compressor, ASME safety valve, regulator, gauges, 1/4-inch quick coupler, manual Cast-iron construction Provides 3.7 cfm at 40 psi and 2.6 cfm at 90 psi; air-regulator and quick-connect coupler 15 amp, 2-horsepower, 6-gallon oil-free pancake compressor; handle; built-in thermal overload protector
found in CPFAC2600P's description: com Review
This Porter-Cable 2-horsepower, 6-gallon pancake compressor transports easily but has plenty of capacity and power--enough to support heavy use of brad and finish nailers and moderate use of framing nailers. Features include a high-flow regulator, an easy-to-read air pressure gauge, automatic thermal overload protection, an industrial-style quick-connect body in the air outlet, and a long-life motor with replaceable brushes. The compressor weighs 32 pounds and has a handle built into the motor housing, so it's relatively portable. This Porter-Cable is as convenient and easy to use as any compressor out there, and it's just about ideal for brad and finish nailers that are being used inside people's homes on a regular basis. --Jonathon Tudor
From the Manufacturer
This oil-free 2-hp pancake-style aircompressor has a new high pressure design that provides 28-percent more usable air! This allows more run time and less down time. The high-flow regulator keeps the tank pressure between 120 PSI and 150 PSI, allowing a greater reserve air capacity. Lightweight for portability, this compressor has plenty of power to fire all brad and finishing nailers as well as moderate usage of roofing and framing nailers. Includes compressor, high flow air regulator and gauges, quick coupler, and instruction manual.8 HP Running
Built-in automatic thermal overload protection
Larger Easy to read regulated air pressure gauge
Universal, High-FloSM, push-to-connect coupler in air outlet
One year warranty
150 PSI - 10 gallon equivalent tank size as compared to conventional 125 PSI model
87 Dba
Oil-free pump design for durability and no maintenance
Long-life motor with replaceable brushes
High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
6 gallon tank supports heavy usage of stapler, brad and finish nailer, standard-to-heavy roofing and standard framing nailer
120 Volt, universal motor starts easily under low voltage conditions
Extension cord use without tripping circuit breakers
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual
SPECIFICATIONS
Lubrication: Oil Free
Gauges: 2
Quick Couple: 1/4" NPT
Weight (Lbs. PSI: 150
SCFM Air Delivery @40 PSI: 3.7
SCFM Air Delivery @90 PSI: 2.
Product Description
2 HP, 6 Gallon, Oil-Free Pancake AirCompressor, 150 PSI Maximum Tank Pressure, 3.6 SCFM @ 90 PSI 87 DBA, 15 AMPS, Built-In Thermal Over Load Protection, Hi-Flo Air Regulator With Quick-Connect Coupler, Regulated Pressure Gauges, Includes ASME Safety Valve, 1 Year Warranty.
23 by 23 by 13-1/2 inches; 68-1/2 pounds; 1-year warranty Includes DEWALT synthetic compressor oil and pressure regulator Cylinder constructed of cast iron 4-1/2 cfm delivered at 100 psi; dual soft start valve for cold-weather starts; oil-lubricated pump 15 amp 2-3/4-horsepower 4-gallon oiled twin hot dog compressor with carrying handle
found in D55155's description: com Review
At just a foot high and less than two feet wide out of the carton, this compressor was quite a bit smaller than we expected, so to be fair, we quickly lowered our expectations. The joke was on us, though, because this little powerhouse just doesnt quit, and we learned that you cant judge a compressor by its size. Emglos half-century in the compressor business is evident in this model, and with a couple of small exceptions (well get into that in a minute), we dont think anyone could make a finer piece of air power. Now, this may be a plus or a minus in your book, but we liked the fact that the compressor is factory set to power on at 100 psi an+d shut off at 120 psi, and the cycle time was under 15 seconds.) It has air aplenty for two nailers at once, and with that fast recovery, the job will get done in no time.
In balance, this is one of the best compressors weve seen for the size, power, ruggedness and incredible portability it offers. Heres to a great pairing of two great toolmakers.--Kris Jensen-Van Heste
Product Description
DeWalt's 2-horsepower, 4-gallon compressor features an oil-lubricated design with a cast-iron cylinder to guarantee job site durability. The new roll-cage design and integrated control panel protects the compressor and the controls from accidental damage. Carrying the compressor is easy, too: the flat design lets the user tote the compressor comfortably like a suitcase. The package comes with the initial fill of DeWalt synthetic aircompressor oil.
From the Manufacturer
This 4-gallon hand-carry compressor was designed to meet the tough demands of the job site. The handle is situated to allow the user to carry the compressor with one hand in a natural walking position. The roll cage and integrated instrument panel protect the compressor and instruments from damage. Comes with the initial fill of DeWalt's synthetic aircompressor oil.
Includes
DeWalt synthetic compressor oil
2 universal quick couplers
Regulator
Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty
Product Description
2 HP, 4 Gallon, Electric Single Tank Hand Carry Compressor, 4.
86 pounds; 2-year limited warranty Includes compressor, mobility kit, ASME safety valve, manual Cast-iron construction 12 amps; 150 psi, enough to operate 2 nailers at once; roll bar to protect motor and pump 2-1/2-horsepower 4-1/2-gallon oiled wheeled single hot dog compressor
found in C3551's description: If you're a contractor looking for the right compressor, you've found it.--Kris Jensen-Van Heste
From the Manufacturer
Why lift when you can roll? The Job Boss Compressor comes equipped with a mobility kit for job site portability.5 gallon, Oil-Lube contractor style compressor is packed with features youll like. The High-flo air regulator and 2-port removable console are winning combinations for contractors looking for performance and versatility. This compressor is designed with a removable console for maximum mobility and air pressure.5 HP single tank aircompressor
Oil-lube aircompressor for maximum durability
150-PSI tank pressure for longer tool run time,
Quieter motor is easy on eardrums
120 V/ 60 hertz/1 phase motor
Two pole, 3450-RPM capacitor start induction motor for maximum air delivery
Includes 1-year limited warranty on parts and accessories
SPECIFICATIONS
150-PSI tank
3450-RPM capacitor start induction motor
8 oz. oil capacity
Product Description
The Job Boss Compressor comes equipped with a mobility kit for job site portability.5 gallon, Oil-Lube contractor style compressor is packed with features youll like. The High-flow air regulator and 2-port removable console are winning combinations for contractors looking for performance and versatility.5 gallon, mobile, contractor-style, single tank aircompressor. 2-port removable console to allow remote air regulation and higher pressure closer to the job site.5 gallon storage capacity air tank supports heavy use of brad nailers, staplers, and finish nailers; moderate use of roofing and framing nailers.5 gallon 150 PSI portable aircompressor, Mobility kit, ASME safety valve, and Operator manual.
found in C3551's reviews: Everything it promises and more.......... - All I can say is there are a LOT of portable aircompressors out there and a lot of them are junk. I did not use the oil that came with compressor though, I decided to run a fully synthetic oil (make sure it is a compressor oil) IngersollRand makes a very high quailty oil for this compressor. Everything is where it should be on this compressor: knobs, gauges,ect. The only thing I would tell someone interested in this compressor is don't be fooled by Porter Cables "oil-free" version of this compressor, I have done a lot of comparision shopping not only is the oil free version much noiser but you will be servicing it much more often than the oil-lube pump. Lowe's sells the "oil-free" version of this compressor for 299.00!!!!!!!! You can purchase this compressor, tax free and shipped free and it will be shipped right to your front door! What a deal! Good job Amazon!.
Dual voltage feature allows easy switching from 120- to 240-volt operation Dual control feature allows start/stop or constant run operation Low profile design for easy maneuverability Twin cylinder, cast iron, oil lubricated pump 6.5 cfm @ 100 psi for quick recovery
found in D55570's reviews: Nice Unit - This aircompressor, like most DeWalt tools is a great piece of equipment.
The compressor will run smoother on start/stop operation if ran on 220V. They have the original Emglo,just a different name due to Dewalt purchasing the Emglo name for non industrial units.
I'm very pleased with the DeWalt D55570 compressor and Amazon's service.
60 gallon vertical tank is a space saving design with easy access to tank tray 6.5 HP Peak motor provides significant power for tough jobs Unique product design from the largest manufacturer of reliable and durable, single stage CAST IRON pumps in the USA Oil-Lubricated pump has a traditional design that is quieter and longer lasting than oilless pumps Solid Cast Iron twin cylinder pump provides up to 5,000 hours of extended life. Over 35% quieter and 60 degrees cooler than aluminum pumps with cast iron cylinder sleeves.
found in VT6275's description:From the Manufacturer
The VT6275, 60 gallon oil-lubricated aircompressor has a solid cast iron twin cylinder pump that provides up to 5,000 hours of extended life.
Product Description
mfr: Campbell Hausfeld Air Products Campbell Hausfeld is a recognized leader in the home improvement and automotive industry.
SINGLE STAGE AIRCOMPRESSOR. Single Stage Cast Iron Compressor7 HP Peak, 60 Gallon Vertical, 240 Volt.
found in VT6275's reviews: Great Quality at a Great Price - I needed to upgrade my shop aircompressor and had narrowed my choices to IngersollRand and Campbell Hausfeld.com sells aircompressors and had an incredible deal on the Campbell Hausfeld VT6275 60 Gallon. Great quality compressor at a great price and a very smooth transaction.
Three year limited warranty Complete with high-flow regulator and quick-connect, pressure gauge and tank gauge Patent pending oil-lube system with ball bearing design Direct drive, no belts or adjustments are necessary 2.5 HP, 4.3-gallon oil-lube compressor
found in CPLDC2541S's description:From the Manufacturer
Porter-Cable is proud to introduce our first oil-lube compressor. When we first put our engineers on the task of designing an oil-lube compressor we gave them one priority; it could not have the same imported pump as all the other major brands have. Just as in a car, the lubrication system in the pump is the most vital part in a compressor. Now, take this revolutionary pump engineered to last over 3,000 hours of use and add in the "High Pressure Technology" and you have compressor that will run at 150 pounds per square inch (PSI).5 horsepower induction motor is safely shrouded and acts as a wind tunnel providing more than enough air to cool the unit down even under the most strenuous conditions.3 HP Running
Patented oil lubrication system allows pump to be operated on an uneven surface
Universal, High-FloSM, push-to-connect coupler in air outlet
150 PSI tank pressure, equivalent to a 7.3 gallon tank at 125 PSI, for 71% more stored work capacity
83 Dba
Higher 120 PSI cut-in pressure assures nails will be completely driven in before pump cycles on
Two pole, 3,450 RPM capacitor start induction motor for maximum air delivery
High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
Low 12 Amp motor draw prevents accidental tripping of circuit breakers
4 gallon storage capacity air tank supports heavy usage of stapler, brad, finish, roofing and framing nailer
Heavy duty cast iron cylinder construction and large 8 oz. oil capacity to assure long life
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, oil, and operating manual
SPECIFICATIONS
Lubrication: Oil Lube
Gauges: 2
Quick Couple: 1/4" NPT
Weight (Lbs. PSI: 150
SCFM Air Delivery @40 PSI: 5.4
SCFM Air Delivery @90 PSI: 4.
found in CPLDC2541S's reviews: Does it job w/ no problems - Unless I just happened to get a good one; I have had no problems w/ this compressor. It is the garage compressor and is exposed to humidity of 70% or more and temps from 33-90's. I have use it to pump car tires, run air nailers,a small porter cable detail spray gun and even a ingersol rand 1/4" air rachtet. I have changed oil once and air filter once.
One Year Warranty Convenient control panel has regulator, gauge, and two quick connect outlets Higher tank pressure provides more usable air per tank re-charge New high-pressure design keeps tank pressure between 110 and 135 PSI 3 HP induction motor delivers 7.7 SCFM at 40 PSI, 5.5 SCFM at 90 PSI
found in CPF23400S's reviews: Fantastic Compressor - I do crafts and wanted a compressor to replace my old one when it died. I was told by others that none of these smaller compressors would do that. I decided that I didn't have money enough to get an industrial comprssor, so went ahead with this one. No problem ! ! ! I could get most of the nuts off of one tire before the compressor would come on again. Perhaps this compressor wouldn't do for a mechanic, but for someone who changes their own tires, it does just fine. It is noisy, but I don't think any more so than any other compressor.