Air Compressor El Model Part Smith V230 - 1   2   3   4   5
2.5 HP 4 Gallon Oil-Lube Air Compressor | Porter-Cable CPLDC2541S
Porter-Cable CPLDC2541S
$369.99 >> $358.51
by Porter-Cable

Three year limited warranty
Complete with high-flow regulator and quick-connect, pressure gauge and tank gauge
Patent pending oil-lube system with ball bearing design
Direct drive, no belts or adjustments are necessary
2.5 HP, 4.3-gallon oil-lube compressor

found in CPLDC2541S's description: From the Manufacturer
Porter-Cable is proud to introduce our first oil-lube compressor. When we first put our engineers on the task of designing an oil-lube compressor we gave them one priority; it could not have the same imported pump as all the other major brands have. So, in true Porter-Cable fashion the engineers came up with a completely different pump. Just as in a car, the lubrication system in the pump is the most vital part in a compressor. That is why this unit was designed with a patent pending oil slinger design as an integral part of the crankshaft that continues to lubricate the piston in any angle. The design features don't stop there; it boasts a cast-iron cylinder, stainless steel Swedish valves, and an automotive type paper filter to trap unwanted particles before they enter the system. The crankcase itself was designed to hold 8 ounces of oil, twice as much as in competitive models. Now, take this revolutionary pump engineered to last over 3,000 hours of use and add in the "High Pressure Technology" and you have compressor that will run at 150 pounds per square inch (PSI).5 horsepower induction motor is safely shrouded and acts as a wind tunnel providing more than enough air to cool the unit down even under the most strenuous conditions.3 HP Running
  • Patented oil lubrication system allows pump to be operated on an uneven surface
  • Universal, High-FloSM, push-to-connect coupler in air outlet
  • 150 PSI tank pressure, equivalent to a 7.3 gallon tank at 125 PSI, for 71% more stored work capacity
  • 83 Dba
  • Higher 120 PSI cut-in pressure assures nails will be completely driven in before pump cycles on
  • Two pole, 3,450 RPM capacitor start induction motor for maximum air delivery
  • High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
  • Low 12 Amp motor draw prevents accidental tripping of circuit breakers
  • 4 gallon storage capacity air tank supports heavy usage of stapler, brad, finish, roofing and framing nailer
  • Heavy duty cast iron cylinder construction and large 8 oz. oil capacity to assure long life
  • Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, oil, and operating manual

    SPECIFICATIONS

    • Lubrication: Oil Lube
    • Gauges: 2
    • Quick Couple: 1/4" NPT
    • Weight (Lbs. PSI: 150
    • SCFM Air Delivery @40 PSI: 5.4
    • SCFM Air Delivery @90 PSI: 4.0
    • Pressure Release: YES
    • Regulator: YES

    WARRANTY
    Backed by a three-year limited warranty.

  • 2.5 HP 4 Gallon Oil-Lube Air Compressor | Porter-Cable CPLDC2540S
    Porter-Cable CPLDC2540S
    $580.00
    by Porter-Cable

    Three year limited warranty
    Full roll cage with high flow regulator and dual quick-connects
    Patent pending oil-lube system with ball bearing design
    Direct drive, no belts or adjustments are necessary
    2.5 HP, 4.3-gallon oil-lube compressor

    found in CPLDC2540S's description: From the Manufacturer
    Porter-Cable is proud to introduce our first oil-lube compressor. When we first put our engineers on the task of designing an oil-lube compressor we gave them one priority; it could not have the same imported pump as all the other major brands have. So, in true Porter-Cable fashion the engineers came up with a completely different pump. Just as in a car, the lubrication system in the pump is the most vital part in a compressor. That is why this unit was designed with a patent pending oil slinger design as an integral part of the crankshaft that continues to lubricate the piston in any angle. The design features don't stop there; it boasts a cast-iron cylinder, stainless steel Swedish valves, and an automotive type paper filter to trap unwanted particles before they enter the system. The crankcase itself was designed to hold 8 ounces of oil, twice as much as in competitive models. Now, take this revolutionary pump engineered for maximum durability and life, and add in the "High Pressure Technology" and you have compressor that will run at 150 pounds per square inch (PSI).5 horsepower induction motor is safely shrouded and acts as a wind tunnel providing more than enough air to cool the unit down even under the most strenuous conditions.3-gallon side stack design incorporates a complete roll cage that protects the dual high-flow quick-connects, the high-flow regulator and pressure gauge as well as the motor and pump. oil capacity to assure long life
  • Patented oil lubrication system allows pump to be operated on an uneven surface
  • Protected panel includes two universal High-FloSM push-to-connect couplers and larger, easy to read regulated air pressure gauge
  • 150 PSI tank pressure, equivalent to a 7.3 gallon tank at 125 PSI, for 71% more stored work capacity
  • 83 Dba
  • Higher 120 PSI cut-in pressure assures nails will be completely driven in before pump cycles on
  • Two pole, 3,450 RPM capacitor start induction motor for maximum air delivery
  • High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
  • Specially designed protective transport handles
  • Low 12 Amp motor draw prevents accidental tripping of circuit breakers
  • 4 gallon storage capacity air tank supports heavy usage of stapler, brad, finish, roofing and framing nailer
  • Standard Equipment: Compressor, ASME safety valve, air regulator and gauge, 1/4" quick coupler, oil, and operating manual

    SPECIFICATIONS

    • Lubrication: Oil Lube
    • Gauges: 2
    • Quick Couple: 1/4" NPT
    • Weight (Lbs. PSI: 150
    • SCFM Air Delivery @40 PSI: 5.4
    • SCFM Air Delivery @90 PSI: 4.0
    • Pressure Release: YES
    • Regulator: YES

    WARRANTY
    Backed by a two year limited warranty.
    found in CPLDC2540S's reviews:
    A- compressor except for the regulator - I've been searching for a portable compressor for a couple of months now and near the end came up with three to chose from: the Emglo 55155, a Hitachi dual stack and this PC.

    After looking at the reviews here, elsewhere and comments from a friend about his Emglo, I decided to go with the 2540S.0 SCFM @ 90 PSI so I can use some automotive tools as well. Other compressors did meet these, but what draw me was the oil lube system that permits you to use it on uneven surfaces. This should be the norm! Other good things are excellent build (USA), non-ball type draincock (ice can ruin a brass ball), pressure release valve (to lower the pressure before you open draincock that can shoot projectiles), caged, not too bad noise level about 83 dbA (noisy street), lower running 1.5max) to not trip the circuit breakers, filtered intake (not output though) for longer motor life, shrouded motor for airflow from fan and good manual.

    Well, all is not well. The small metal cup also bit part of the plastic grommet retainer. Well I had to fix mine so I can work that day. The only thing I added at the universal coupler end is a water/air filter. Hope this helps.

  • - Ingersoll Rand Electric Stationary Air Compressor - 3 HP, 10.3 CFM @ 135 PSI, 230 Volt, Model# SS3
    Ingersoll Rand SS3L3
    $559.99 >> $559.99
    by Ingersoll Rand

    Tank Size: 60 gallon vertical
    Max PSI: 135 PSI
    PSI: 11.3 CFM @ 90 PSI; 10.3 CFM @ 135 PSI
    Volts: 230 Volts
    Motor: 3 HP with thermal overload and manual reset - single phase motor

    found in SS3L3's description: Product Description
    Maximum air power! More delivered air (CFM) gives you the power to do the job right and in less time.
    Thomas Compressors 900 3 Amp 1/15th Horsepower Tankless Diaphragm Compressor
    Thomas Compressors 900XXX
    $151.90 >> $111.26
    by Thomas Compressors

    Die-cast aluminum construction
    Ideal for airbrushing
    Max pressure 35-40 psi
    lightweight - 8 lbs.
    1/15th HP - diaphragm compressor

    found in 900XXX's description: This Model 900 is ideal for most household applications. The oil-less diaphragm compressor is quiet running, needs. parts and stainless steel valves.
    5-1/2 Horsepower 8 Gallon Wheeled Oiled Gas Twin Pontoon Compressor | Maxus EX8003
    Campbell Hausfeld EX8003
    $950.00 >> $950.00
    by Campbell Hausfeld

    Convenient control panel design for job site use
    Reliable job site performance
    Easy to read gauges and dual quick connects
    Up to 5000 hours of pump life

    found in EX8003's description: This model also features a convenient control panel.

    Product Description
    mfr: Campbell Hausfeld Air Products Campbell Hausfeld takes performance to the max by launching Maxus, a new brand of heavy-duty powered equipment for contractors and serious do-it-yourselfers. Unlike other new brands, Maxusprovides added security with its connection to Campbell Hausfeld, one of the oldest and most trusted brands in the power equipment industry. Maxusis a trademark of Campbell Hausfeld. Founded in 1836 and headquartered in Harrison, Ohio, Campbell Hausfeld is a leading manufacturer and marketer of power tools.

    Campbell Hausfeld is a recognized leader in the home improvement and automotive industry. The company product line has expanded over the years to include a variety of tools and equipment designed to help do-it-yourselfers and professionals finish their jobs faster and easier. Campbell Hausfeld aims to offer leading edge products and solutions that exceed customer expectations.

    Premium Gas Powered Compressor - Contractor Model - 5.5 HP Honda Gas, Twin 8 Gallon Wheelbarrow, Cast Iron (Five Year Limited Warranty).
    15 Amp 2-1/2 Horsepower 8 Gallon Oiled Wheeled Single Hot Dog Compressor | Campbell Hausfeld HL5501
    Campbell Hausfeld HL5501
    $169.00 >> $169.99
    by Campbell Hausfeld

    Delivers 4 avg scfm @ 90 psi
    Wheels and handle for easy portability
    Oil-lubricated cast iron cylinder pump for long lasting, reliable performance
    Large, 8-gallon tank for extra storage

    found in HL5501's description: com
    An air compressor isn't one of those must-have tools for the homeowner—-that is, until you've used one. This eight-gallon model puts out an average of 4 standard cubic feet per minute at 90 psi, plenty for any task the homeowner or hobbyist has in mind. The HL5501 has plenty of power for a stapler or nailer; imagine how quickly a chair rail could go up. We like this model because it's compact, sturdy and, with a little maintenance and care, it will last for years and years. It weighs in at just over 75 pounds, but the handle and wheels let you take it anywhere without breaking a sweat. Because it's a smaller unit, its air delivery is lower, so make sure you check the air requirements of the tools you intend to use it with. For its size and capacity, it's a good, hard worker that will serve the homeowner well.--Kris Jensen-Van Heste

    From the Manufacturer
    Ideal for inflating balls and tires, nailing fences, stapling protective wrap, and more, this 8-gallon air compressor offers a whole new world of around-the-house convenience. An oil-lubricated cast iron cylinder pump offers long lasting, reliable performance. A handle and wheels make this compressor highly portable for doing jobs in the basement, on the roof, and in the yard. You'll get those occasional home repair jobs done more quickly and with less expensive with this Campbell Hausfeld compressor and air tools.

    Compared to electric power tools, Campbell Hausfeld air tools save you both time and money. The initial cost of an air tool is significantly lower than its electrically powered counterpart, and the average life is longer. Air tools also deliver more torque and higher revolutions-per-minute than electric tools, helping you complete your jobs more quickly and effectively.

    FEATURES

    • Large, 8-gallon tank for extra storage
    • Oil-lubricated cast iron cylinder pump for long lasting, reliable performance
    • Wheels and handle for easy portability
    • Delivers 4 avg scfm @ 90 psi

    SPECIFICATIONS

    • Delivers 4 avg scfm @ 90 psi



    Product Description
    8 Gallon, 15A Cast Iron Air Compressor, Oil Lube Pump With 2.
    found in HL5501's reviews:
    Sturdy, portable, cheap oil-lubricated compressor... But noisy! -
    Cons: Noisy (for an oil-lube), poor quality wheel hardware
    (could've been an isolated problem on only my unit).

    Let me start by saying that I can't live without an air compressor. Those of you who don't have one have no idea how much you'll use it and what an integral part of any household project or repair it will become when you finally have one. That being said, let me explain why I bought this particular compressor and what I think about it thus far.

    Until recently, I had an 8-gallon oil-free compressor that was handed down to me from my dad after I bought him a large stationary garage unit about 6 years ago. This thing lasted about 13 years with very regular use with a few repairs over the years. This is absolutely unheard of with an oil-free compressor.

    I am a resident of the Mississippi Gulf Coast, which as you know was largely distroyed by Hurricane Katrina on 8/29/05. In order to replace the blue tarp roof provided by FEMA with some actual shingles, I will need a compressor to power my roofing and framing nailers. Portability and reliability are important factors in order to assist with the reconstruction efforts of the community once the repairs to my home are complete.

    I always try to buy tools that will last a very long time and are as reliable as possible, for obvious reasons. This is why I decided on an oil-lubricated compressor. Although I had great success with the aforementioned oil-free compressor, I do understand that this was more the exception than the rule. It is hard to find an oil-lubed compressor that is both portable and affordable. Although you can find some that are on wheels, most of these units weigh 150+ lbs., making them very difficult to get in and out of your truck/car by yourself, let alone getting them up a flight of stairs. Also, it's not uncommon to pay $400+ for one of these, making it impractical for most home users and do-it-yourselfers. The pressure switch is mounted to a post that is welded to the tank. I don't think that this was shipping-related, as I can't see how that could possibly happen in it's packaging. Also, the plastic shroud that covers the motor/pump is slightly cracked because it contacts a part underneath it. This was obviously an assembly issue and not related to shipping. Next, you have to install the wheels using the included nuts, bolts and washers and two wrenches (1/2" & 5/8", not included). On one of the wheels, the threads of the bolt completely stripped with very little effort at all. I had to use a tap & die set to cut new threads in order to complete the wheel installation. I may replace both wheels with some larger pneumatic ones for added portability in the future. This compressor does not come with oil, even though the instruction manual says "only use the oil that was shipped with the compressor." The other thing that you will run into is that it does not come with a coupler to connect an air hose to. Although this is very common for air tools not to come with the required fittings to connect it to a hose, there is one difference here. I have never seen a quick-disconnect air hose connector (the hose end that has the sleeve to release the connection) with male threads on it. (a brass pipe nipple for you plumbers out there)

    Use:
    The Campbell Hausfeld HL5501 overall seems to be a very good compressor. If you are looking into this compressor because of the reduced noise level that oil-lubed compressors are known for, then you will be disappointed. This compressor is every bit as loud as any comparable oil-free unit. Maybe this is because it is direct-drive and runs at a higher RPM (as apposed to belt-driven models), but at least you don't have to worry about replacing the belt.

    Conclusion:
    I would recommend this compressor to the handy home user that wants the reliability and longevity of an oil-lube compressor, but doesn't want to spend a lot of money. It's easy to wheel around the house or garage and light enough to bring to your buddy's house to help with a weekend project. I would not recommend this compressor if the noise level is a big issue, but be prepared to spend a lot more money for a belt-driven unit.

    1.8RHP Contr Compressor
    Campbell Hausfeld EX8000
    $314.99 >> $314.99
    by Campbell Hausfeld

    CAMPBELL HAUSFELD
    CAMPBELL HAUSFELD #EX8000 1.8RHP Contr Compressor

    found in EX8000's description: Product Description
    mfr: Campbell Hausfeld Air Products Campbell Hausfeld takes performance to the max by launching Maxus, a new brand of heavy-duty powered equipment for contractors and serious do-it-yourselfers. Unlike other new brands, Maxusprovides added security with its connection to Campbell Hausfeld, one of the oldest and most trusted brands in the power equipment industry. Maxusis a trademark of Campbell Hausfeld. Founded in 1836 and headquartered in Harrison, Ohio, Campbell Hausfeld is a leading manufacturer and marketer of power tools.

    Campbell Hausfeld is a recognized leader in the home improvement and automotive industry. The company product line has expanded over the years to include a variety of tools and equipment designed to help do-it-yourselfers and professionals finish their jobs faster and easier. Campbell Hausfeld aims to offer leading edge products and solutions that exceed customer expectations.

    Premium Electric Compressor - Contractor Model - 1.
    14.2 Amp 2-1/2 Horsepower 4 Gallon Oiled Twin Hot Dog Compressor | Grip-Rite GR254CTS
    Grip Rite GR254CTS
    $239.00 >> $239.00
    by Grip Rite

    12-Month limited warranty
    Electric direct drive and oil splash lubricated for longer life
    Contractor grade, heavy duty pump with cast-iron cylinder
    Industrial grade motor with ball bearings provides greater durability
    4.3 gallon capacity twin tanks, 2.5 HP (peak)

    found in GR254CTS's description: From the Manufacturer
    For years Grip-Rite has been the smart contractor's choice for fasteners due to their durability, reliability and value. These same principles are now built into Grip-Rite's line of professional quality tools and compressors. Make no mistake, this compact but rugged compressor will keep the busiest roofing and framing crews going all day, job after job. This unit features stainless steel reed valves and oil splash lubrication for a long life of hard work. The design of this unit was intended to minimize the footprint while still offering enough air to handle almost any job. Compare to: Hitachi EC119, Porter Cable Job-boss Model #C3551, Porter-Cable CPLDC2541S, Porter-Cable CPLDC2540S, Rol-Air The Bull.
    15 Amp 3 Horsepower 4-1/4 Gallon Oiled Twin Pontoon Compressor | Grip-Rite GR2500
    Grip Rite GR2500
    $299.00 >> $299.00
    by Grip Rite

    12-Month limited warranty
    Electric direct drive and oil splash lubricated for longer life
    Superior Quality Speroni? pump
    Life expectancy of up to 8,000 hours
    Contractor grade, 3 HP (peak), 4.2 gallon capacity

    found in GR2500's description: From the Manufacturer
    In less than a decade Grip-Rite has established itself as the brand to trust for fasteners due to their commitment to quality, reliability and unsurpassed value. These same principles are now reflected in Grip-Rite's line of professional quality tools and compressors. This is currently Grip-Rite's flagship compressor for good reason. This unit features stainless steel reed valves and oil splash lubrication for a long life of hard work (up to 8,000 hours!). Other added features include a heavy duty pressure switch and large metal gauges, a start-up relief valve for minimized amperage draw upon cold startup and a moderate 69 decibel noise level. The pontoon-style tank design of this unit was intended to minimize tip over while still offering enough air to handle nearly any job. Compare to: Hitachi EC119, Porter Cable Job-boss Model #C3551, Porter-Cable CPLDC2541S, Porter-Cable CPLDC2540S, Rol-Air The Bull.
    Maxus EX8041 15 Amp 3 Horsepower 60 Gallon Oiled Vertical Compressor
    Campbell Hausfeld EX8401
    $499.99 >> $499.98
    by Campbell Hausfeld

    3-horsepower motor for heavy duty air tool applications
    Up to 5,000 hours pump life for unsurpassed reliability
    Cast iron pump for optimal durability
    60 degrees cooler than aluminum pumps with cast iron sleeves
    Over 35 percent quieter and than aluminum pumps with cast iron sleeves

    found in EX8401's description: From the Manufacturer
    Equipped with a 100 percent cast iron pump, the Maxus 60-Gallon Air Compressor outlasts and outperforms aluminum pumps for cleaner painting applications and more reliable air tool operation. A beefy, 3-horsepower motor cranks out 135 PSI for operating most air tools. A heavy duty air filtration system means clean painting applications and longer tool life.

    FEATURES

    • Cast iron pump for optimal durability
    • Up to 5,000 hours pump life for unsurpassed reliability
    • 3-horsepower motor for heavy duty air tool applications
    • Plenty of power for operating most continuous flow air tools
    • Metal Solber air filter for clean painting applications

    SPECIFICATIONS

    • MODEL NUMBER EX8401
    • RUNNING HP 3.
    • LIMITED WARRANTY 3-5 Years
    • CERTIFICATION ASME



    Product Description
    3 RHP, 60 Gallon, Vertical Air Compressor, Solid, Cast Iron, Twin Cylinder, Oil Lubricated Pump, High Performance Motor, Metal Solberg Air Filter, Delivers 11.

    Air Compressor El Model Part Smith V230 - 1   2   3   4   5

    Porter-Cable (27)
    Campbell Hausfeld (18)
    DeWalt (14)
    Emglo (10)
    Thomas Compressors (9)
    Bostitch (9)
    Makita (6)
    Hitachi (5)
    Porter Cable (4)
    Grip Rite (3)
    GRIP-RITE (2)
    Palmgren (2)
    Xantrex Technologies (1)
    Black & Decker (1)
    Ingersoll Rand (1)
    Wagan (1)
    Stanley Hand Tools (1)
    AccuSet (1)
    Q Industries (1)
    Senco (1)

    Other Searches:

    Air Compressor El Model Part Smith V230
    Smith Air Compressor Part
    919152920 Air Compressor Model Repair
    Smith Portable Air Compressor
    Air Compressor Part
    Old Air Compressor Part
    Air Compressor Part Used
    Gas Air Compressor Part
    Air Compresser Part
    Air Compressor Part Portable
    ©2006