Air compressor combo kit - Porter-Cable CFFN250NR, Makita MAC700KIT, Porter-Cable CFBN200A, Porter-Cable CPFAC2600P, Makita MAC5200, Campbell Hausfeld FP202899AV

Air Compressor Combo Kit - 1 2

*16 Gauge Finish Nailer 18 Gauge Brad Nailer Compressor* \| Factory-Reconditioned Porter-Cable CFFN250NR**
	$540.00 by Porter-Cable 52 pounds; 1-year warranty Includes brad nailer, finish nailer, compressor, vinyl air hose, pipe joint tape Heavy-duty steel construction Comes with 16-gauge finish nailer, 18-gauge brad nailer, and 6-gallon, 10 amp, oil-free pancake compressor Factory-reconditioned finish nailer and compressor combo kit found in CFFN250NR's description: You can finish any woodworking project with this limited edition kit that includes both a finish nailer, brad nailer, and compressor. Ideal for on-site trim work, architectural woodwork, and casework installation, this finish nailer and compressor kit from Porter-Cable is perfect for the finish trim installer. Includes: 1 Porter-Cable 16 gauge, 3/4"�2-1/2" finish nailer kit (FN250B), 1 Porter-Cable 18 gauge, 5/8" �1-1/4" braid nailer kit (BN125A), 1 135 psi, 2hp, 6 gallon pancake style compressor, 1 300 psi, 25' vinyl air hose, 1 air hose fitting, 1/4" male plus coupler, Pipe joint tape. found in CFFN250NR's reviews: Quality control issue - I just received a reconditioned Porter Cable combo* and was very disappointed. The regulator was clearly defective it blew air through the housing.*
*18 Gauge Brad Nailer Compressor* Combo Kit \| Makita MAC700KIT**
	$518.00 >> $329.95 by Makita Roll bar handle for portability and added protection against harsh jobsite environments Oil lubricated for cooler running pump and an automotive style air filter for easy, low-cost maintenance Large cast iron pump with automotive style cylinder and piston deliver maximum performance The low 1720 rpm is half that of most competitive units, resulting in greater motor and pump life, and the substantially lower noise level makes it the quietest compressor in its class High rated 3.3 CFM @ 90 PSI found in MAC700KIT's description: From the Manufacturer The new MAC700KIT-Hotdog compressor (with AF503 2 Brad Nailer) by Makita is blowing away the competition with built-in features such as a super quiet motor that draws only 12. Packed with our popular AF503 2 Brad Nailer, 25' Hose, fittings and nails, this kit includes everything needed to get started. found in MAC700KIT's reviews: Very god combo - This is a nice compressor-nailer kit. 2) Makita used two small (temporary) plastic plugs, one for the air inlet (it includes a air filter assemply to be screwed into this) and another for the oil filler hole.

*18 Gauge Brad Nailer Compressor* Combo Kit \| Porter-Cable CFBN200A**
	$423.00 >> $175.00 by Porter-Cable 1 year limited warranty Complete kit with quick-connects, 25' 150 psi air hose, thread sealing tape, nailer case, and wrenches Oil-free compressor produces 3.7 scfm at 40 psi and 2.7 scfm at 90 psi Nailer features cushion grip, depth of drive, quick-release nosepiece, and directional exhaust Professional nailer shoots 3/4" to 2" 18 gauge brad nails found in CFBN200A's description: Here they've packaged their hard-working 18-gauge brad nailer with its power source--a 15 amp, 120-volt, 6-gallon compressor driven by a 2-horsepower oil-free motor. Fill up the nailer with standard 18-gauge brads from 3/4 inch to 2 inches long, hook up, and you're ready to install baseboards, chair rails, moldings, even make quick work of those wooden craft items like country shelves and vegetable bins. The kit comes with quick connects, 25 feet of 150 psi air hose and thread sealing tape. found in CFBN200A's reviews: **Compressor combo** - This is a good combo, but don't believe Amazon's pitch that this is a $472 package. *The Perfect Trim Combo* Pack - Not only did I receive my order for this combo pack 2 days earlier than expected, but I could not be more pleased with the quality and performance for the money. This is an older and proven compressor design that I was well familiar with. I would highly recommend this kit as an invaluable necessity for professioanl trim work. Great Products** - After shopping around and comparing nailers and compressors, I decidede to purchase this combo* kit. This kit arrived well packed and easily put into service.* *Porter-Cable CFBN200A 2" 18 Gauge Brad Nailer/Compressor* Combo Pack** - The compressor* is loud but if you don't mind the noise it is not a factor.* I'm very happy with the nailer AND Amazon - I investigated cordless nailers from Paslode (too expensive) and Senco (questionable reliablilty) before settling on the Porter-Cable CFBN200A Combo from Amazon. The compressor charges quickly but is quite loud, but it only kicks on (after the initial charge) after a lot of brads are fired. So don't let mine and other comments about the compressor noise scare you.
*15 Amp 2 Horsepower 6-Gallon Oil-Free Pancake Compressor* \| Porter-Cable CPFAC2600P**
	$316.16 >> $167.00 by Porter-Cable 32 pounds; 1-year warranty Includes compressor, ASME safety valve, regulator, gauges, 1/4-inch quick coupler, manual Cast-iron construction Provides 3.7 cfm at 40 psi and 2.6 cfm at 90 psi; air-regulator and quick-connect coupler 15 amp, 2-horsepower, 6-gallon oil-free pancake compressor; handle; built-in thermal overload protector found in CPFAC2600P's description: com Review This Porter-Cable 2-horsepower, 6-gallon pancake compressor transports easily but has plenty of capacity and power--enough to support heavy use of brad and finish nailers and moderate use of framing nailers. Features include a high-flow regulator, an easy-to-read air pressure gauge, automatic thermal overload protection, an industrial-style quick-connect body in the air outlet, and a long-life motor with replaceable brushes. The compressor weighs 32 pounds and has a handle built into the motor housing, so it's relatively portable. This Porter-Cable is as convenient and easy to use as any compressor out there, and it's just about ideal for brad and finish nailers that are being used inside people's homes on a regular basis. --Jonathon Tudor From the Manufacturer This oil-free 2-hp pancake-style air compressor has a new high pressure design that provides 28-percent more usable air! This allows more run time and less down time. The high-flow regulator keeps the tank pressure between 120 PSI and 150 PSI, allowing a greater reserve air capacity. Lightweight for portability, this compressor has plenty of power to fire all brad and finishing nailers as well as moderate usage of roofing and framing nailers. Includes compressor, high flow air regulator and gauges, quick coupler, and instruction manual.8 HP Running Built-in automatic thermal overload protection Larger Easy to read regulated air pressure gauge Universal, High-FloSM, push-to-connect coupler in air outlet One year warranty 150 PSI - 10 gallon equivalent tank size as compared to conventional 125 PSI model 87 Dba Oil-free pump design for durability and no maintenance Long-life motor with replaceable brushes High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch) 6 gallon tank supports heavy usage of stapler, brad and finish nailer, standard-to-heavy roofing and standard framing nailer 120 Volt, universal motor starts easily under low voltage conditions Extension cord use without tripping circuit breakers Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual SPECIFICATIONS Lubrication: Oil Free Gauges: 2 Quick Couple: 1/4" NPT Weight (Lbs. PSI: 150 SCFM Air Delivery @40 PSI: 3.7 SCFM Air Delivery @90 PSI: 2. Product Description 2 HP, 6 Gallon, Oil-Free Pancake Air Compressor, 150 PSI Maximum Tank Pressure, 3.6 SCFM @ 90 PSI 87 DBA, 15 AMPS, Built-In Thermal Over Load Protection, Hi-Flo Air Regulator With Quick-Connect Coupler, Regulated Pressure Gauges, Includes ASME Safety Valve, 1 Year Warranty. found in CPFAC2600P's reviews: I love this litte work horse! - This Compressor is a great value,you will not find a better one for this price.I have used this compressor with a finish nailer and have had no down time at all.I would look into buying the combo pack with the brad nailer,I think its a better deal.The brad gun alone sells for a 100 bucks! The combo pack has everything you need to start driving brads right out of the box,Thanks porter cable for a great machine at an attractive price.Everyone can now afford to become an "airhead" Once you do you will never go back to a hammer again. bad compressor - I purchased a combo pack, 1 month after the warranty ran out the compressor stopped working, I took it to a locate service center , which stated motor barins where gone and it would be $240 to replace, it was cheaper to buy a new one. When I emailed porter cable , it took a long time for a response , by then i had bought a new ( different make)compressor.
*13.8 Amp 3 Horsepower 5 Gallon Oiled Wheeled Single Hot Dog Compressor* \| Makita MAC5200**
	$544.00 >> $319.00 by Makita 29 by 19 by 19-1/2 inches; 88 pounds; 1-year warranty 1/4-inch brass Makita universal coupler Cast-iron pump and roll cage construction 6-1/2 cfm delivered at 90 psi; low 1,720 rpm extends motor life and lowers noise 13.8 amp, 3-horsepower, 5-gallon oiled wheeled single hot dog compressor and folding handle found in MAC5200's description: com Product Review Whether you need a compressor for woodworking, painting, caulking or construction, this 5-gallon Makita is a great choice, primarily because of its impressive 6-1/2 cfm at 90 psi on a 13. Built-in Storage Compartment - Conveniently stores air fittings & accessories. Air Hose Wrap - Stores 50 of 3/8" Air Hose with handle folded or upright. Large automotive style industrial air filter for increased air intake and greater efficiency. Include the 1/4" Brass Makita universal coupler. found in MAC5200's reviews:* This is a good machine - Miraculously, only the Makita label was scraped when I opened the box. I'm just happy Makita isn't in the moving business. The compressor is awesome. I also used a cheapo cutting wheel with it, and it actually had enough capacity to do a larger cut, and kept going pretty well when the compressor kicked on. I certainly didn't really need this much power, and probably could have made do with one of the Porter Cable combo specials, but I don't like to bring a knife to a gunfight. Makita, besides the wheels, the one cool thing that I would like to see on this tool is a hose reel.
*1 Gallon Tank Mounted Air* Compressor with 2 in 1 Nailer \| Campbell Hausfeld FP202899AV**
	$79.00 by Campbell Hausfeld Accessories are included for convenient use right out of the box. Compressor offers automatic shut-off feature. Bonus nailer kit is included with a 2 in 1 1-1/4" brad nailer and 1-1/4" stapler. The sturdy handle allows for comfortable handling and simple storage. 1 Gallon tank offers additional stored air capacity. Tank eliminates pulsations caused by piston action. found in FP202899AV's reviews: handy for small jobs - This is a great little combo* for the money. I have had zero problems with the combo in the four months since I have had them.*