| 2-1/2" 16 Gauge Finish Nailer / Compressor Combination Kit | Bostitch CPACK200 | |
 |
by Bostitch  Kit also comes with a 25-foot airline kit with all fittings and teflon tape 1.5 hp, 5.8-gallon oil-less compressor with wheels for portability 1000 2-1/2-inch finish nails, tool oil, tool carrying case Combo pack includes a 2-1/2-inch 16-gauge finish nailerfound in CPACK200's reviews: Exactly what I expected (pretty much)... - I decided on the Bostitch Finish Nailer because of the Stanley Tools reputation, and the recommendation of two friends that use Bostitch air tools on almost a daily basis." The plastic motor housing on the compressor was busted when the package arrived-- looking at some of the other reviews, this seems to be a recurring problem. This is my first air tool, so I was a little disappointed in the instructions/documentation; once I pulled everything out of the box and took a little time to figure things out (which wasn't that difficult), I was shooting nails within ten minutes. may be assuming some level of "air tool knowledge" for anyone purchasing their product.) Overall though, I'm thrilled with the design and functionality of the compressor and the nailer. Shipping seems to be a problem - I received my nailer/compressor combo today. I read the reviews on this tool before I ordered it, and several people reported shipping damage. The foot rest on the end of the compressor tank was bent. The documentation and instructions were pretty skimpy (make that real skimpy), but I was nailing in about 15 minutes, and so far the nailer works fine. Quality Problems, Quality Problems - I just received my bostich package and have used it one day. Let me say, it is my first air nailer and I love the concept. However, my package arrived without all the parts and absolutely no instructions for the nailer. The compressor was missing hardware for one wheel preventing me from setting it up. The compressor also had a large number of scratches on its side like it had been slid across a floor. Nothing I won't do to it eventually on my own but not nice for a new tool. The instructions for the compressor are very poor. After finding a web site (none is listed in the info) and then finding an 800 number I got enough info to get me up and running. The package is a good deal and I'm still deciding whether to keep it but just a little more effort could have avoided a lot a hassle. |
| Round Head Framing Nailer and Compressor Combo Kit | Porter-Cable CFFR350B | |
 |
by Porter Cable Additional features: tool-free adjustable depth of drive, nail lock out mechanism, tool-free adjustable exhaust, ???? air fitting, removable non-marring nose tip Selectable trigger, restrictive or contact actuation mode Power to drive nails (up to 3-1/2" x .131") into engineered lumber Delivers twice the life over previous tools Uses standard 22 degree 2" to 3-1/2" x .113" to .131" plastic collated round head framing nails. |
| 15 Amp 2 Horsepower 25 Gallon Oil-Free Wheeled Vertical Compressor | Porter-Cable C6110 | |
 |
by Porter-Cable Cushioned handle grip, Standard Equipment: Compressor, High-FloSM air regulator and push to connect coupler and operating manual. Oil-Free Pump - No maintenance or spilled oil, Vertical tank configuration takes less floor space .9 (running) HP induction motor for long life, High-FloSM air regulator and push to connect coupler 150 PSI max for longer tool run time, 120 PSI cut-in pressure provides 30 PSI "Bonus Air" before a 90 PSI tool becomes inoperable 5.4 SCFM for faster tank recharge of 25 gal tankfound in C6110's description: From the Manufacturer This oil free, space saving vertical, wheeled portable air compressor from Porter-Cable provides 25 gallons of air tank reserve at a 150 PSI maximum pressure which provides 71 percent more usable air over traditional 125 PSI maximum air pressure units operating tools that require 90 PSI. This allows more tool run time and more work to be completed in-between recharges. With a pressure switch controller that automatically restarts the motor at the 120 PSI falling tank pressure point you get this quicker motor/pump operation and bonus air delivery. Supports all nailing applications and moderate + air tool usage of most air tools.9 Running HP capacitor start induction motor runs on a 15 amp circuit and provides 7.7 SCFM at 40 PSI and 5. Includes 9 wheels and a foam padded metal handle. High air flow regulator, high flow quick coupler two gages are also included. Reserve air tank is ASME approved. One year warranty and CUL listed. |
| 16 Gauge Finish Nailer 18 Gauge Brad Nailer Compressor | Factory-Reconditioned Porter-Cable CFFN250NR | |
 |
by Porter-Cable 52 pounds; 1-year warranty Includes brad nailer, finish nailer, compressor, vinyl air hose, pipe joint tape Heavy-duty steel construction Comes with 16-gauge finish nailer, 18-gauge brad nailer, and 6-gallon, 10 amp, oil-free pancake compressor Factory-reconditioned finish nailer and compressor combo kitfound in CFFN250NR's description: From the Manufacturer This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes. You can finish any woodworking project with this limited edition kit that includes both a finish nailer, brad nailer, and compressor. Ideal for on-site trim work, architectural woodwork, and casework installation, this finish nailer and compressor kit from Porter-Cable is perfect for the finish trim installer. Uses standard 16-gauge brad nails from 3/4 to 2-1/2 inches. Includes: 1 Porter-Cable 16 gauge, 3/4"�2-1/2" finish nailer kit (FN250B), 1 Porter-Cable 18 gauge, 5/8" �1-1/4" braid nailer kit (BN125A), 1 135 psi, 2hp, 6 gallon pancake style compressor, 1 300 psi, 25' vinyl air hose, 1 air hose fitting, 1/4" male plus coupler, Pipe joint tape. found in CFFN250NR's reviews: Great Tool/Good Value - Contrary to the other reviews, I don't find the compressor to be too loud. Can't tell the difference - I received this reconditioned tool last week and used both of the nailers over the weekend. They both look and work as anticipated, flawlessly. Quality control issue - I just received a reconditioned Porter Cable combo and was very disappointed. The regulator was clearly defective it blew air through the housing. I tried tightening connections and it would hold no compression. The unit was reconditioned in Mexico and I have read that there are real quality control issues in their factories. If you make this purchase and are dissapointed, as I was, call customer service they can at least expedite the shipping of a new unit because they can't do a replacement upgrade- Amazon will make it right. As far as I am concerned I won't touch another reconditioned tool that is reconditioned in Mexico, until I hear that they are bringing their quality standards up. I have read extensively about Maytag quality issues since they moved their factory from Iowa to Mexico!! The articles I read spoke of the fact that the factories in Mexico rely on day labor for sometimes critical manufacturing roles and turnover is way over 100%. |
| - Dual Action Finish Tool & Compressor Combo Kit | CPACK270 | |
 |
by Bostitch All required fittings & thread sealant tape 3/8" x 25' heavy duty airline with MPT fittings CAP1516 - Trim Air 1.5 Peak HP oil-free contractor compressor SB-2in1 combination brad nailer/finish stapler SB-1664FN 16-gauge, 2-1/2" finish nailerfound in CPACK270's description: Product Description Bostitch SB-1664FN 16-Gauge Straight Finish Nailer This Bostitch finish nailer drives 1- to 2-1/2-inch, 16-gauge finish nails and weighs only 4. Features & Benefits: Aluminum housing for job site durability Quick release nose door for fast jam clearing Adjustable depth control for quick countersinking adjustments Rubber grip for comfort Adjustable deflector conveniently directs exhaust No-mar tip protects work surface Includes carrying case Bostitch SB-2IN1 Brad Nailer / Finish Stapler Combo Tool The ultimate Tool for the craftsman and home hobby shop! The most asked for tool is finally available. This tool drives up to a 1-5/8-inch brad and also a 1-1/2-inch finish staple. The SB-2IN1 tool needs no adjustment to change fasteners. Features & Benefits: Drives both brads and finish staples Adjustable depth control for quick countersinking adjustments Tool-free adjustable deflector conveniently directs exhaust Rubber grip for comfort Aluminum housing Includes carrying case CAP1516 - Trim Air 1.5 Peak HP oil-free contractor compressor Features and Benefits 1.5 peak horsepower ultra-efficient 8 amp induction motor High-efficiency oil-free pump eliminates maintenance Compact design for maximum portability and shop storage Internal 1. |
| 15 Amp 1-1/2 Horsepower 20 Gallon Oil-Free Wheeled Single Hot Dog Compressor | Porter-Cable C5101 | |
 |
by Porter-Cable Full shroud for pump/motor protection, Cushioned handle grip, Standard Equipment: Compressor, High-FloSM air regulator and push to connect coupler, pneumatic tires and operating manual. Oil-Free Pump - No maintenance or spilled oil, Full pneumatic tires for ease of mobility 1.7 (running) HP induction motor for long life, High-FloSM air regulator and push to connect coupler 150 PSI max for longer tool run time, 120 PSI cut-in pressure provides 30 PSI "Bonus Air"before a 90 PSI tool becomres inoperable 5.7 SCFM for faster tank recharge of 20 gal tankfound in C5101's description: From the Manufacturer This oil free, horizontal low profile, wheeled portable air compressor from Porter-Cable provides 20 gallons of air tank reserve at a 150 PSI maximum pressure which provides 71 percent more usable air over traditional 125 PSI maximum air pressure units operating tools that require 90 PSI. This allows more tool run time and more work to be completed in-between recharges. With a pressure switch controller that automatically restarts the motor at the 120 PSI falling tank pressure point you get this quicker motor/pump operation and bonus air delivery. Supports all nailing applications and moderate air tool usage of most air tools.7 Running HP capacitor start induction motor runs on a 15 amp circuit and provides 7.2 SCFM at 40 PSI and 5. Includes 9 wheels and a foam padded metal handle. High air flow regulator, high flow quick coupler two gages are also included. Reserve air tank is ASME approved. One year warranty and CUL listed. |
| Maxus EX8041 15 Amp 3 Horsepower 60 Gallon Oiled Vertical Compressor | |
 |
by Campbell Hausfeld 3-horsepower motor for heavy duty air tool applications Up to 5,000 hours pump life for unsurpassed reliability Cast iron pump for optimal durability 60 degrees cooler than aluminum pumps with cast iron sleeves Over 35 percent quieter and than aluminum pumps with cast iron sleevesfound in EX8401's description: From the Manufacturer Equipped with a 100 percent cast iron pump, the Maxus 60-Gallon Air Compressor outlasts and outperforms aluminum pumps for cleaner painting applications and more reliable air tool operation. It’s over 35 percent quieter than aluminum pumps with cast iron sleeves and operates 60 degrees cooler. A beefy, 3-horsepower motor cranks out 135 PSI for operating most air tools. A heavy duty air filtration system means clean painting applications and longer tool life. FEATURES
SPECIFICATIONS
|
| 9 Horsepower 17 Gallon Wheeled Oiled Single Hot Dog Gas Compressor | DeWalt D55275 | |
 |
by DeWalt ASME coded 17-gallon OSHA recognized tank Automatic idle control for reduced fuel consumption Ball drain valve allows for quick and thorough tank draining Four cylinder, cast iron, oil lubricated pump for durability and reliability 9 HP Honda GX gas engine provides proven reliability and durabilityfound in D55275's description: 2 cubic feet per minute at 100 psi and is able to run a variety of pneumatic tools. It's powered by an 8-horsepower Honda engine with automatic throttle control to conserve fuel when air is not being used. The cast-iron four-cylinder pump is designed and built for longevity. Compressor includes a 3/8-inch regulator and the initial fill of DeWalt synthetic air compressor oil.2 cubic feet per minute delivered at 100 psi for high-volume usage Specifications
Includes
Warranty |
| 15 Amp 2 Horsepower 20 Gallon Oiled Wheeled Single Tank Compressor | Porter-Cable C5510 | |
 |
by Porter-Cable Cushioned handle grip, Standard Equipment: Compressor, High-FloSM air regulator and push to connect coupler, pneumatic tires and operating manual Full pneumatic tires for ease of mobility, Patented belt tensioning device 1.9 (running) HP induction motor for long life, High-FloSM air regulator and push to connect coupler, Oil-Lube Pump - for long life 150 PSI max for longer tool run time, 120 PSI cut-in pressure provides 30 PSI "Bonus Air" before a 90 PSI tool becomes inoperable 5.4 SCFM for faster tank recharge of 20 gal tankfound in C5510's description: From the Manufacturer This very quiet 78 dBA, traditional belt drive oil lube, horizontal low profile, wheeled portable air compressor from Porter-Cable provides 20 gallons of air tank reserve at a 150 PSI maximum pressure which provides 71 percent more usable air over traditional 125 PSI maximum air pressure units operating tools that require 90 PSI. This allows more tool run time and more work to be completed in-between recharges. With a pressure switch controller that automatically restarts the motor at the 120 PSI falling tank pressure point you get this quicker motor/pump operation and bonus air delivery. Supports all nailing applications and moderate + air tool usage of most air tools.9 Running HP capacitor start induction motor runs on a 15 amp circuit and provides 7.7 SCFM at 40 PSI and 5. Oil lubricated pump with aluminum body and head for best cooling and cast iron cylinder sleeve inserts for best wear. Includes 10 pneumatic wheels, foam padded metal handle, high air flow regulator/quick coupler and two gages. Reserve air tank is ASME approved. Two year warranty and CETL listed. |
| 8 Horsepower 8-Gallon Oiled Twin Pontoon Gas Compressor | DeWalt D55271 | |
 |
by DeWalt Low oil shut off provides greater engine protection 8 HP Honda OHV GX gas engine provides proven reliability and durability Low profile design for easy maneuverability Quad cylinder, cast iron, oil lubricated pump 16.2 cfm delivered @ 100 psi for high volume applicationsfound in D55271's description: 2 cubic feet per minute @ 100 psi, while the low-profile design of the compressor means less operator fatigue and maximum job site maneuverability. The quad-cylinder, cast-iron, oil-lubricated pump has Emglo's 50 years of proven durability and reliability behind it. Features include a beefed-up, totally enclosed steel belt guard, pneumatic tire, brass valves and fittings, stainless-steel braided after-cool tube, ball valve drain, and constant run control so the engine runs idle when not under load. The compressor includes a 3/8-inch regulator and an initial fill of DeWalt synthetic air compressor oil.2 cubic feet per minute delivered at 100 psi for high-volume applications Specifications
Includes
Warranty |