Dual voltage feature allows easy switching from 120- to 240-volt operation Dual control feature allows start/stop or constant run operation Low profile design for easy maneuverability Twin cylinder, cast iron, oil lubricated pump 8.4 cfm @ 100 psi for quick recovery
found in D55580's description: Fully-Pneumatic tire improves worksite mobility. * Include DEWALT Synthetic Compressor Oil and 3/8" NPT pressure regulator.
18 by 10 by 22 inches; 52 pounds; 1-year warranty 1/4-inch brass Makita universal coupler Cast-iron pump and roll cage construction 3.3 cfm delivered at 90 psi; low 1,720 rpm extends motor life and lowers noise 12.4 amp, 2-horsepower, 2-1/2-gallon oiled single hot dog compressor with handle
found in MAC700's description:From the Manufacturer
The new MAC700 - Hotdog compressor by Makita is blowing away the competition with built-in features such as a super quiet motor that draws only 12.0HP AIRCOMPRESSOR 12. hot dog tank Low amp draw & oil lubricated Roll-bar handle Industrial air filter & cast iron cylinder Oil sight glass & lever handle ball valve Built-in thermal overload for motor protection MAC700 2HP AIRCOMPRESSOR.
found in MAC700's reviews: AirCompressor Report - Only disapointment is that it takes a lot longer to remove my truck tire lug nuts as it has to cycle often to maintain CFM and pressure to operate impact gun. Quiet, Solid, Well Made - I wanted a portable compressor for using my nail guns at old houses, and was ready to replace my antique mastodon shop compressor. I was thinking I may have to buy two compressors, most portable units were too loud for the shop. A few weeks ago I bought a Ridgid brand "oil-free" compressor at Home Depot but it was so loud that I couldn't use it indoors, even covered with a chunk of old carpet. It had good air flow.3 CFM is higher than many of the 75-pound twin stack compressors I saw. To reduce cycling in the shop, I attached my 5-gallon air tank (the kind you use for putting air in a flat tire) to the tank side of the regulator with a T and snap coupler.like don't use the compressor in the bathtub. It's a large, high quality compressor mounted on a small, portable tank. You'll get really spoiled if you're used to a noisy oil-less compressor.
32 pounds; 1-year warranty Includes compressor, ASME safety valve, regulator, gauges, 1/4-inch quick coupler, manual Cast-iron construction Provides 3.7 cfm at 40 psi and 2.6 cfm at 90 psi; air-regulator and quick-connect coupler 15 amp, 2-horsepower, 6-gallon oil-free pancake compressor; handle; built-in thermal overload protector
found in CPFAC2600P's description: com Review
This Porter-Cable 2-horsepower, 6-gallon pancake compressor transports easily but has plenty of capacity and power--enough to support heavy use of brad and finish nailers and moderate use of framing nailers. Features include a high-flow regulator, an easy-to-read air pressure gauge, automatic thermal overload protection, an industrial-style quick-connect body in the air outlet, and a long-life motor with replaceable brushes. The compressor weighs 32 pounds and has a handle built into the motor housing, so it's relatively portable. This Porter-Cable is as convenient and easy to use as any compressor out there, and it's just about ideal for brad and finish nailers that are being used inside people's homes on a regular basis. --Jonathon Tudor
From the Manufacturer
This oil-free 2-hp pancake-style aircompressor has a new high pressure design that provides 28-percent more usable air! This allows more run time and less down time. The high-flow regulator keeps the tank pressure between 120 PSI and 150 PSI, allowing a greater reserve air capacity. Lightweight for portability, this compressor has plenty of power to fire all brad and finishing nailers as well as moderate usage of roofing and framing nailers. Includes compressor, high flow air regulator and gauges, quick coupler, and instruction manual.8 HP Running
Built-in automatic thermal overload protection
Larger Easy to read regulated air pressure gauge
Universal, High-FloSM, push-to-connect coupler in air outlet
One year warranty
150 PSI - 10 gallon equivalent tank size as compared to conventional 125 PSI model
87 Dba
Oil-free pump design for durability and no maintenance
Long-life motor with replaceable brushes
High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
6 gallon tank supports heavy usage of stapler, brad and finish nailer, standard-to-heavy roofing and standard framing nailer
120 Volt, universal motor starts easily under low voltage conditions
Extension cord use without tripping circuit breakers
Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual
SPECIFICATIONS
Lubrication: Oil Free
Gauges: 2
Quick Couple: 1/4" NPT
Weight (Lbs. PSI: 150
SCFM Air Delivery @40 PSI: 3.7
SCFM Air Delivery @90 PSI: 2.
Product Description
2 HP, 6 Gallon, Oil-Free Pancake AirCompressor, 150 PSI Maximum Tank Pressure, 3.6 SCFM @ 90 PSI 87 DBA, 15 AMPS, Built-In Thermal Over Load Protection, Hi-Flo Air Regulator With Quick-Connect Coupler, Regulated Pressure Gauges, Includes ASME Safety Valve, 1 Year Warranty.
found in CPFAC2600P's reviews: Perfect for my needs and budget too - I have a small workshop with very little space and I need to have "air" available at times. Despite its 92-decibel noise level which is, I think, louder than it may sound, the unit is light in weight with an easy-carry handle cut-out, has virtually no vibration, offers oil-less operation and fills up very quickly. The particular unit that I purchased at a local home center offered this compressor packed with a coiled air hose, blow gun, tire chuck, tire pressure gauge, NPT fittings, etc. However, I made a separate purchase of a 50' length of regular braided air hose for increased flexibility and mobility. Also, it's a bit difficult to use certain air tools with this model because the capacity and constant volume of air are not that great.
Can be stored easily in home shop environment or "on the go" in automobile, boat, or tractor. A storage solution that is convenient with on-board simplicity Fast and Powerful for inflation of household and shop items EZ Air Dial automatically shuts off the unit once you hit the desired PSI Power in home/shop or from vehicle charger
found in ASI300's description:From the Manufacturer
The Black & Decker ASI300, Air Station Inflator, inflates household and shop items quickly and powerfully. Inflates items up to 200 PSI and comes with the convenient EZ Air Dial that automatically shuts off the unit once you hit the desired PSI.
found in ASI300's reviews: Gets the job done - - built-in handle is nice - long 12V auto power cord - two-year warranty
Negatives: - When it stops automatically after inflating one item (such as a tire), it must be turned off and back on to inflate another item, or to increase pressure setting and continue filling. - the air hose is fairly short.
60 pounds; 1-year warranty Includes DEWALT synthetic compressor oil and pressure regulator Cylinder constructed of cast iron 4.1 cfm delivered at 90 psi; shut-off valve at line and auto reset 14-1/2 amp 2-horsepower 4-gallon oiled twin hot dog compressor with carrying handle
found in EC12's description: com
Hitachis 2-horsepower compressor is one of the hardest-working units on the market.1 cfm of free air at 90 psi--enough to easily run two tools at once. Because of its compact size and trim weight, its the perfect compressor for the home do-it-yourselfer, but taking into account its power and portability, contractors will love it, too.--Kris Jensen-Van Heste
From the Manufacturer
This Hitachi aircompressor is powered by a 2 hp, 115-volt direct-drive motor and oil lube pump at 3,450 rpm.1 cfm of free air, at 90 psi.
From the Manufacturer
The Hitachi EC12 aircompressor is powered by a 2-horsepower, 115-volt direct-drive motor and oil lube pump at 3,450 rpm. It delivers 4 cubic feet per minute of free air at 90 psi.2 cubic feet per minute of free air
Specifications
Horsepower: 2
Amps: 15
Speed: 3,450 rpm
Air displacement: 8. Oil lube single piston compressor type, line regulator with gauge, direct drive electric motor, suction cup feet for extra stability, O-ring on draincock makes valve easy to open and close and resists stripping, vertically stacked twin tanks.
found in EC12's reviews: Disappointing - Had this unit for about three years with very light use - occasional tire inflation. As a previous writer indicated, the gauges got stuck, the pressure release valve froze, it wouldn't start and turned out to be uneconomical to repair.
Roll bar handle for portability and added protection against harsh jobsite environments Oil lubricated for cooler running pump and an automotive style air filter for easy, low-cost maintenance Large cast iron pump with automotive style cylinder and piston deliver maximum performance The low 1720 rpm is half that of most competitive units, resulting in greater motor and pump life, and the substantially lower noise level makes it the quietest compressor in its class High rated 3.3 CFM @ 90 PSI
found in MAC700KIT's description:From the Manufacturer
The new MAC700KIT-Hotdog compressor (with AF503 2 Brad Nailer) by Makita is blowing away the competition with built-in features such as a super quiet motor that draws only 12.
found in MAC700KIT's reviews: Exceeded my expectations - The compressor isn't crazy loud; it's just another motor running, quite acceptable.
I'm most happy that this unit can drive an impact wrench for tire changes./lbs torqued) off a 2002 Honda CR-V and the compressor doesn't kick in until I'm working on the last (fifth) lug nut, and then it only runs for 20 seconds or so.
Fully enclosed protective belt guard with "Directed" cooling fan. 5 HP Peak motor provides significant air flow. Operates on 120/240 volt service. Pre-wired for 120V. Unique product design from the largest manufacturer of reliable and durable, single stage CAST IRON pumps in the USA 20 Gallon ASME code tank for tough jobs. Rugged Cast Iron two cylinder pump provides up to 5,000 hours of extended life. Oil-Lubricated pump has a traditional design that is quieter and longer lasting.
found in VT6290's description:From the Manufacturer
The VT6290, 2 Running HP, wired for household current delivers enough air power to tackle tough jobs. The twin cylinder, oil lubricated, cast iron single stage pump runs quieter - so the compressor can be used in the same area that the work is taking place. Solid cast iron units are up to 35% quieter than aluminum units with cast iron cylinder sleeves, and dramatically quieter than direct drive aluminum compressors. These compressors are made in the US with a 3 year warranty.
Product Description
mfr: Campbell Hausfeld Air Products Campbell Hausfeld is a recognized leader in the home improvement and automotive industry.
SINGLE STAGE AIRCOMPRESSOR. Single Stage Cast Iron Compressor5 HP Peak, 20 Gallon.
found in VT6290's reviews: VT6290 and FedEx - The box was busted on one side causing some of the content to spill outside (a tire and air filter). On top of that, FedEx delivered the box upside down, causing the discharge tube to bend, the air filter to separate from the pump, a busted pressure gauge and a bent handle bar. The compressor DOES NOT include oil. The air filter supplied causes the compressor to be kind of noisy.
Except for the awful FedEx delivery, I am happy with the compressor. Free delivery, free air hose, no tax, and 10% off.
0 Extra-flexible 3' hose with universal locking adapter Pressure-tested tank holds compressed air for months Great for inflating car, truck and bike tires, sporting equipment and other recreational equipment in remote areas where a power source is not available
found in KT1100's description: 11 Gallon AirCarry Tank.
Product Description Airtight tank holds compressed air for months Models include: Air shut-off gage.
found in KT1100's reviews: Works as advertised - I've had one of these Campbell Hausfeld tanks for many years, to carry compressed air outside to work on lawn equipment.
Pros:
- For low air-volume applications, or when you need decent pressure for a short while, it works just fine. It's purpose is to have compressed air on a small job (or tire-filling), where there is no electricity.
Cons:
- After filling the tank (125 psi to 175 psi, depending on your aircompressor), pressure will quickly drop below 80 psi once you start using it. So, this tank is only practical for air tool use of very short duration - e., an air ratchet wrench to remove a handful of bolts/nuts. Air tools just don't work [well] with insufficient pressure. In fact, with 11 gallons of pressurized air, this tank is only useful for small air-volume applications, regardless of pressure needed. Of course, the tank can be refilled as needed, but that gets tiresome.
With no electricity nearby, options include: this tank, a long extension cord, or a long air hose. Otherwise, any aircompressor would be a better choice, since air volume at pressure, will be unlimited. (Of course, the cheapest tank aircompressors cost around $100.
Built-in emergency light for illumination at home or on the road Vehicle jumper cables 250 psi aircompressor for inflating tires and sports equipment Operates 115-volt AC or 12-volt DC products anywhere Provides up to 300 watts of AC power
found in 852-1840's reviews: Not Happy With Item - I purchased 2 of these Xantrex compressors. I planned on keeping one the trunk in case of a tire emergency. What a joke!! The compressor started to make a horrible noise about 2 minutes into the tire inflation and never worked again. Well, I had the "spare" compressor, but the same thing happened to it. It's a battery, not a generator - The Xanex "Generator" isn't a generator at all; it's a small rechargeable battery combined with a lamp and one of those cheesy little battery powered tire pumps that sometimes come in roadside emergency kits. And if you want a portable battery/charger package for running accessories and emergency car starting, there are better units. I use it all the time! - I've even given two of these away as gifts!
I've used this Xantrex 300 watt generator and it has helped me in numerous situations:
My car battery died. I used this to jumpstart my car.
My car's tire has a slow leak. I used the aircompressor function to re-inflate it. It takes a long time to inflate tires, compared to those 50 cent air/water machines at the gas stations, but it gets the job done and I can take it with me. It works on my Acura's 15 inch tires, as well as my friend's Dodge Ram (30+) inch tires. I constantly plug in my laptop (Dell inspiron 8600) while in my car.
One Year Warranty Convenient control panel has regulator, gauge, and two quick connect outlets Higher tank pressure provides more usable air per tank re-charge New high-pressure design keeps tank pressure between 110 and 135 PSI 3 HP induction motor delivers 7.7 SCFM at 40 PSI, 5.5 SCFM at 90 PSI
found in CPF23400S's reviews: Fantastic Compressor - I do crafts and wanted a compressor to replace my old one when it died. I was told by others that none of these smaller compressors would do that. Since I rotate the tires on my car myself, I decided to put it to the test. No problem ! ! ! I could get most of the nuts off of one tire before the compressor would come on again. Perhaps this compressor wouldn't do for a mechanic, but for someone who changes their own tires, it does just fine. It is also light enough and small enough that I can throw it in the trunk of my car. It is noisy, but I don't think any more so than any other compressor.