Air belt compressor drive - Hitachi EC16, Thomas Compressors TG-550H, Porter Cable CFFR350B, Porter-Cable C5510, DeWalt D55271, DeWalt D55270, DeWalt D55275, Senco PC0947, DeWalt D55585, Hitachi EC6C

Air Belt Compressor Drive - 1 2 3 4 5

*2-1/2 HP Compressor, Oil \| Hitachi EC16*
	$N/A by Hitachi 30-day satisfaction guarantee and one-year warranty on parts and labor 15 amps Belt-drive motor
*5-1/2 Horsepower Oiled Wheeled Twin Pontoon Gas Compressor* \| Thomas Compressors TG-550H**
	$1,149.00 >> $933.42 by Thomas Compressors Honda 5.5 HP GX160 Engine with low oil shut down Automatic idle down control Direct-drive design - no adjustments Lightweight - only 96 lbs. 12 cfm at 100 psi - 8 HP performance, 5.5 HP price found in TG-550H's description: From the Manufacturer The TG-550H is the worlds first 2 cylinder direct-drive compressor. The innovative design does not use pulleys, flywheels, belts, or belt-guard assemblies. The compressor is bolted directly to the engine flange which results in a lightweight, compact machine that out-performs anything in its class.) and with air delivery of 12. The 2 cylinder direct-drive design is Honda approved and virtually maintenance free. The compressor never needs adjustment and air delivery remains contant, there is no loss of performance due to belt stretching or slippage.

*Round Head Framing Nailer and Compressor* Combo Kit \| Porter-Cable CFFR350B**
	$875.00 by Porter Cable Additional features: tool-free adjustable depth of drive, nail lock out mechanism, tool-free adjustable exhaust, ???? air fitting, removable non-marring nose tip Selectable trigger, restrictive or contact actuation mode Power to drive nails (up to 3-1/2" x .131") into engineered lumber Delivers twice the life over previous tools Uses standard 22 degree 2" to 3-1/2" x .113" to .131" plastic collated round head framing nails.
*15 Amp 2 Horsepower 20 Gallon Oiled Wheeled Single Tank Compressor* \| Porter-Cable C5510**
	$387.26 >> $471.99 by Porter-Cable Cushioned handle grip, Standard Equipment: Compressor, High-FloSM air regulator and push to connect coupler, pneumatic tires and operating manual Full pneumatic tires for ease of mobility, Patented belt tensioning device 1.9 (running) HP induction motor for long life, High-FloSM air regulator and push to connect coupler, Oil-Lube Pump - for long life 150 PSI max for longer tool run time, 120 PSI cut-in pressure provides 30 PSI "Bonus Air" before a 90 PSI tool becomes inoperable 5.4 SCFM for faster tank recharge of 20 gal tank found in C5510's description: From the Manufacturer This very quiet 78 dBA, traditional belt drive oil lube, horizontal low profile, wheeled portable air compressor from Porter-Cable provides 20 gallons of air tank reserve at a 150 PSI maximum pressure which provides 71 percent more usable air over traditional 125 PSI maximum air pressure units operating tools that require 90 PSI. With a pressure switch controller that automatically restarts the motor at the 120 PSI falling tank pressure point you get this quicker motor/pump operation and bonus air delivery. Supports all nailing applications and moderate + air tool usage of most air tools. Includes 10 pneumatic wheels, foam padded metal handle, high air flow regulator/quick coupler and two gages. Patented automatic belt tensioning system. Reserve air tank is ASME approved.
*8 Horsepower 8-Gallon Oiled Twin Pontoon Gas Compressor* \| DeWalt D55271**
	$2,814.37 >> $1,679.00 by DeWalt Low oil shut off provides greater engine protection 8 HP Honda OHV GX gas engine provides proven reliability and durability Low profile design for easy maneuverability Quad cylinder, cast iron, oil lubricated pump 16.2 cfm delivered @ 100 psi for high volume applications found in D55271's description: 2 cubic feet per minute @ 100 psi, while the low-profile design of the compressor means less operator fatigue and maximum job site maneuverability. Features include a beefed-up, totally enclosed steel belt guard, pneumatic tire, brass valves and fittings, stainless-steel braided after-cool tube, ball valve drain, and constant run control so the engine runs idle when not under load. The compressor includes a 3/8-inch regulator and an initial fill of DeWalt synthetic air compressor oil.2 cubic feet per minute delivered at 100 psi for high-volume applications Quad-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability Low-profile design for easy maneuverability 8-horsepower Honda OHV GX gas engine provides proven reliability and durability Low-oil shutoff provides greater engine protection Automatic idle control for reduced fuel consumption Pneumatic tire improves worksite mobility Ball valve drain allows for quick and thorough tank draining Specifications Drive: belt drive Horsepower: 8 hp Tank size: 8 gallons Power supply: Honda gas OHV GX engine Cubic feet per minute at 100 psi: 16. Includes DeWalt synthetic compressor oil 3/8-inch NPT pressure regulator Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.
*5-1/2 Horsepower 8 Gallon Wheeled Oiled Twin Pontoon Gas Compressor* \| DeWalt D55270**
	$1,609.74 by DeWalt Low profile design and pneumatic tire for mobility Automatic idle control for reduced fuel consumption Ball drain valve allows for quick and thorough tank draining Twin cylinder, cast iron, oil lubricated pump for durability and reliability 5.5 HP Honda GX gas engine provides proven reliability and durability found in D55270's description: The automatic throttle control allows the unit to idle and conserve fuel when air is not required. Other features include a braided steel after-cooler, heavy-duty belt guard, ball-type tank drain valves, and a 3/8-inch regulator with gauges. The D55270 comes complete with the initial fill of DeWalt synthetic air compressor oil.5-horsepower Honda OHV GX gas engine provides proven reliability and durability Low-oil shutoff provides greater engine protection Automatic idle control for reduced fuel consumption Pneumatic tire improves worksite mobility Ball valve drain allows for quick and thorough tank draining Specifications Drive: belt drive Horsepower: 5. Includes DeWalt synthetic compressor oil 3/8-inch NPT pressure regulator Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty Product Description 5.5 HP, 8 Gallon, Compressor Powered By A Honda GX Gas Engine With Proven Reliability & Durability, 8.9 CFM @ 100 PSI, Automatic Idle Control For Reduced Fuel Consumption, Low Oil Shut Off Provides Greater Engine Protection, Twin Cylinder, Cast Iron, Oil Lubricated Pump With Emglo's 50 Years Of Proven Durability & Reliability, Ball Valve Drain Allows For Quick & Thorough Tank Draining, Low Profile Design For Easy Maneuverability, Pneumatic Tire Improves Worksite Maneuverability, Includes: Dewalt Synthetic Compressor Oil & Pressure Regulator.
*9 Horsepower 17 Gallon Wheeled Oiled Single Hot Dog Gas Compressor* \| DeWalt D55275**
	$2,882.60 >> $1,399.99 by DeWalt ASME coded 17-gallon OSHA recognized tank Automatic idle control for reduced fuel consumption Ball drain valve allows for quick and thorough tank draining Four cylinder, cast iron, oil lubricated pump for durability and reliability 9 HP Honda GX gas engine provides proven reliability and durability found in D55275's description: It's powered by an 8-horsepower Honda engine with automatic throttle control to conserve fuel when air is not being used. Compressor includes a 3/8-inch regulator and the initial fill of DeWalt synthetic air compressor oil.2 cubic feet per minute delivered at 100 psi for high-volume usage Quad-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability Dual wheels make maneuvering easier on the worksite 8-horsepower Honda OHV GX gas engine provides proven reliability and durability Low-oil shutoff provides greater engine protection Automatic idle control for reduced fuel consumption ASME-coded 17-gallon OSHA-recognized tank Ball valve drain allows for quick and thorough tank draining Specifications Drive: belt drive Horsepower: 8 hp Tank size: 17 gallons Power supply: Honda gas OHV GX engine Cubic feet per minute at 100 psi: 16. Includes DeWalt synthetic compressor oil 3/8-inch NPT pressure regulator Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.

*/ FP18KIT 18-Gauge Brad Nailer Compressor* Combo Kit \| Senco PC0947**
	$249.00 >> $197.00 by Senco 1-year warranty on nailer; 90-day warranty on compressor Includes nailer, 1/4-inch -by-25-foot hose, safety glasses, fittings, oil, 1,200 brad nails, wrenches, and manuals Compressor: 1 horsepower, 2-1/2 gallons; aluminum cylinder with steel sleeve; 20 pounds Nailer: adjustable depth of drive, rear exhaust, easy-open latch, no-mar pad, low-load indicator 18-gauge brad nailer and 1-gallon compressor combo kit found in PC0947's description: The FinishPro 18 brad nailer drives nails up to 2" into hard wood applications. FinishPro 18 FEATURES Extra power — Drives fasteners up to 2" in hard wood applications Belt hook — For convenience Adjustable depth-of-drive Rear exhaust — Keeps oil and dust away from work surface Easy-open latch — For quick and comfortable loading Hardened steel driver — For extended life Full soft grip — For comfort and control Low load indicator — Visible fastener indication No-mar pad — To protect work materials One-year warranty Includes case, fitting, oil, hex wrench and fastener rebate Projects Baseboard,cabinets, casebacks, chair rail, finish and trim, furniture frames, furniture trim, mirror and picture frames, trim FinishPro 18 SPECIFICATIONS Power (in/lbs): 168 Height: 9.3 bar) Mode of Operation: Restrictive Trigger Fastener Types Gauge: 18 Fastener Range: 5/8"—2" Finish: Galvanized What's in the Box This kit comes complete with the FinishPro 18 brad nailer, a Senco 1/2 hp (1 hp peak), 1-gallon compressor, 1/4-by-25-foot coil hose, safety glasses, fittings, tool oil, variety pack of 1,200 brad nails, tool wrenches and manuals. Product Description Finish Pro 18 Combo Kit, Perfect For Woodworkers & Punch List Contractor, Kit Includes, Lightweight Oilless, 1HP Compressor, Finish Pro 18 Brad Nailer 5/8" To 2", Hose, Fittings, Sample Pack Of Brads, Safety Glasses & Bottle Of Oil. found in PC0947's reviews: My new favorite tool! - THE COMPRESSOR: The PC1010 will change the industry. For homeowners, hobby woodworkers, and customer service professionals in the cabinetry industry this is the perfect compressor. There is no need to lug around a 4 or 6 gallon compressor for a little brad nailer. You can easily carry the nailer, hose, and bread box sized compressor in one hand. I nailed right through the recovery time, and never had to wait for the compressor to before driving any brads. I would not recommend the PC1010 for anyone who wants to drive anything larger than 18ga brads, or run multiple air tools from a single compressor. Also - the compressor is so new that Senco has very limited literature on it, but I would be willing to bet they will get this taken care of soon.
*15 Amps/ 8Amps 2 Horsepower 17-Gallon Electic Wheeled Portable Compressor* with Dual Vo \| DeWalt D55585**
	$1,812.29 >> $849.99 by DeWalt Ball valve drain allows for quick and thorough tank draining Dual voltage feature allows easy switching from 120 to 240 volts Dual control feature allows start/stop or constant run option Twin cylinder, cast iron, oil lubricated pump 8.4 cfm delivered at 100 psi with 17-gallon tank found in D55585's description: From the Manufacturer You will never run short of air again with this 2-horsepower electric wheeled compressor supported by an ASME-coded 17-gallon OSHA-recognized tank. The user can quickly and completely drain the compressor by the ball valve drain, which won't clog like other models that use needle valves. The D55585 includes DeWalt's synthetic compressor oil and a 3/8-inch NPT pressure regulator.4 cubic feet per minute delivered at 100 psi, enables speedy recovery Twin-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability 2-horsepower motor provides increased performance Dual wheels make maneuvering easier on the worksite Dual control feature allows start/stop or constant run operation Dual voltage feature allows easy switching from 120- to 240-volt operation ASME-coded 17-gallon OSHA-recognized tank Ball valve drain allows for quick and thorough tank draining Specifications Drive: belt drive Horsepower: 2 hp Tank size: 17 gallons Power supply: 2-pole induction motor Cubic feet per minute at 100 psi: 8. Includes DeWalt synthetic compressor oil 3/8-inch NPT pressure regulator Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.
*1- HP Compressor* Oil-less \| Hitachi EC6C**
	$N/A by Hitachi 30-day satisfaction guarantee and one-year warranty on parts and labor 9 amp motor runs at 1,700 rpm, providing 4.1 cubic feet per minute of free air Line regulator with gauge Direct-drive electric motor 2.3 cubic feet per minute at 90 psi