Air Amp Compressor Product - 1   2   3
16 Gauge Finish Nailer 18 Gauge Brad Nailer Compressor | Factory-Reconditioned Porter-Cable CFFN250NR
Porter-Cable CFFN250NR
$540.00
by Porter-Cable

52 pounds; 1-year warranty
Includes brad nailer, finish nailer, compressor, vinyl air hose, pipe joint tape
Heavy-duty steel construction
Comes with 16-gauge finish nailer, 18-gauge brad nailer, and 6-gallon, 10 amp, oil-free pancake compressor
Factory-reconditioned finish nailer and compressor combo kit

found in CFFN250NR's description: You can finish any woodworking project with this limited edition kit that includes both a finish nailer, brad nailer, and compressor. Ideal for on-site trim work, architectural woodwork, and casework installation, this finish nailer and compressor kit from Porter-Cable is perfect for the finish trim installer. Includes: 1 Porter-Cable 16 gauge, 3/4"�2-1/2" finish nailer kit (FN250B), 1 Porter-Cable 18 gauge, 5/8" �1-1/4" braid nailer kit (BN125A), 1 135 psi, 2hp, 6 gallon pancake style compressor, 1 300 psi, 25' vinyl air hose, 1 air hose fitting, 1/4" male plus coupler, Pipe joint tape.
found in CFFN250NR's reviews:
Porter Cable Compressor - Very pleased with the speed of the shipment and the product. I used the compressor to install an oak hardwood floor.
Good Product, Great Deal - The compressor works as advertised & looks brand new.
The Hotdog 12.4 Amp 2 Horsepower 2-1/2 Gallon Oiled Single Hotdog Compressor | Makita MAC700
Makita MAC700
$288.00 >> $176.40
by Makita

18 by 10 by 22 inches; 52 pounds; 1-year warranty
1/4-inch brass Makita universal coupler
Cast-iron pump and roll cage construction
3.3 cfm delivered at 90 psi; low 1,720 rpm extends motor life and lowers noise
12.4 amp, 2-horsepower, 2-1/2-gallon oiled single hot dog compressor with handle

found in MAC700's description: From the Manufacturer
The new MAC700 - Hotdog compressor by Makita is blowing away the competition with built-in features such as a super quiet motor that draws only 12.4 amps to operate.

Product Description
mfr: makita 2.0HP AIR COMPRESSOR 12.4 amp, 1,720 RPM & 0-130 PSI 3. hot dog tank Low amp draw & oil lubricated Roll-bar handle Industrial air filter & cast iron cylinder Oil sight glass & lever handle ball valve Built-in thermal overload for motor protection MAC700 2HP AIR COMPRESSOR.
found in MAC700's reviews:
Damaged Goods - This looks like a good air compressor, but unfortunately I never got to find out. To make matters worse, the company won't stand behind its product by reparing the shipping damage. If you really want this product, it is best to pay the extra $50 and buy it from a store where you can examine it before you pay. Otherwise, find a product that is properly packaged for shipping.
Excellent product -
Great compressor for my CD Eraser operation, bearable noise level - I bought a $300 DeWalt compressor and it was very loud. I have a blister packaging machine in the garage that requires compressed air to operate the heat sealing plate. I am packaging my own product in the garage, as a startup operation. Search under SunZag to see my CD Eraser product, also DiscEraser. Anyhow, this Makita compressor is used in the garage along with my machine and the noise level is bearable.
Very Good Product - Received compressor with great aprehension due to the negative reviews on the shipping "damges". Makita does produce quality products.
Another Damaged compressor - This will be the last Makita product that I own.
Reviewer from Arizona - I am pleased with this Makita's compressor. Comparing it to other light weight/low capacity compressors I had before the engine noise is not that bad. For instance the air filter is place in an aluminum container whereas most other small compressors use plastic containers instead which can easily break off. This is a good product.
Arrived damaged II1 - As with my first experience the second Makita air compressor arrived in the same condition. This is a design flaw in the product. The elbow sticks out away from the compressor and it is very fragile and shears off with any type of contact from anything. Can you imagine every time the compressor were to hit anything or tip over the elbow would shear off.

Amazon was slow to ship and I got an email that said they were having trouble shipping the compressor to me. I don't know what kind of trouble but the compressor was sent to me several days after the initial time for shipping.

They are going to come and pick up the compressor and refund my money after they get the compressor.

Great Product - shipping bad - However, I learned my lesson ording big (HEAVY) products on-line. Our box was clearly tossed around or banged into during shippment which broke off the air filter assembly that screws into the cylinder head. To avoid the HUGE hassle of returning/shipping the compressor to Amazon, incurring shipping charges that were initially free when I ordered the compressor, lugging it back to UPS, and waiting for who knows how long for a replacement, I contacted Mikita and got a replacement part directly from them.
Great Product....Bad Manual - A well put together compressor that is wonderful for the weekend warrior. This compressor is well built and should last a long time. I assume that Makita used to ship this item with air filter attached because there is no mention in the manual that you have to install the filter. It is not difficult to perform this procedure, mind you, but it would be nice to have it mentioned in the manual under the section on setting up the compressor.
13 Amp 2-1/2 Horsepower 4 Gallon Oiled Twin Hot Dog Compressor | Makita MAC2400
Makita MAC2400
$460.00 >> $249.00
by Makita

19-3/8 by 18 by 18-3/4 inches; 77 pounds; 1-year warranty
1/4-inch brass Makita universal coupler
Cast-iron pump and roll cage construction
4.2 cfm delivered at 90 psi; low 1,720 rpm extends motor life and lowers noise
13 amp, 2-1/2-horsepower, 4-gallon oiled twin hot dog compressor with handle

found in MAC2400's description: From the Manufacturer
The new MAC2400 - Twin Stack air compressor by Makita is blowing away the competition.3 amps to operate, a lower 1720 RPM rating and a heavy duty Intake Air Filter system like no other, its easy to see how this unit will out last and outperform everyone else.

Product Description
Low Noise - Substantially lower noise levels with a large 1,720 - RPM pump-enabling greater displacement at lower RPM. Low Amp Draw - Reduces incidences of tripped breakers and voltage drop that can cause premature motor failure. Large automotive style industrial air filter for increased air intake and greater efficiency.
found in MAC2400's reviews:
Great product, - This has been a great compressor. The compressor is suprissingly quite and runs 2 siding nailers without any slow downs. A great product at a great price.
A very good compressor - This is an excellent product.
Quitest air compressor I've ever had! - If you need an air compressor to use indoors, this is it. Looks and runs like a quality product.
HEAVY = TOUGH - Great compressor i replaced my PC Pancake with this fine product and i know there is a differance in the size and weight, but i was alittle shocked how heavy it was.
Compressor great, but has a couple of issues - This is a great compressor and is highly recommended. However, you need to be mindful that this compressor is _very_ heavy. It _is_ quiet, as far as compressors go.

All in all, a fine product. Perhaps Makita will work on making a manual that matches the quality of the compressor.

A well made , quiet compressor. - I have been using this compressor trimming houses for the last three weeks and I am well pleased with it's performance. I usually run two to three 15 gauge trim guns at a time and this compressor is more than adequate for my needs. The main reason I purchased this compressor over several other brands was the ability to run it off of a 100' 10 gauge extension cord without tripping the breaker, it only draws 12.3 amps (as per product description) ,and I haven't tripped a breaker yet . The added bonus is just how quiet it is, it's way quieter than any other compressor I have used. I DO NOT recommend buying an oil free compressor , I have used several, and just haven't got the life out of them like an oil lube.
Superb compressor - Makita needs to fire their packing design person. - I am extremely happy with the compressor for general garage, woodworking, and around-the-house duties. My first unit was badly damaged by a loose air filter (with a thick metal bolt) that was just floating around in the box. I returned it, second unit also damaged in exactly the same spot also by the same free-floating air compressor.

I hate to take a point off of a great product because of packaging, but this is a recurrent theme for most Makita products I have bought. I wonder how they can afford to replace all the damaged products that could have been prevented with ten cents worth of cardboard.

Best in class - I think it's the best for the following:
A) This compressor just purrs.
B) Over-built compressor compared to tank size - so cycle times are very short - if using light-duty tools, it doesn't run much anyway.
C) No leaks - holds its air pressure seemingly forever when turned off (not that you shouldn't release pressure when done using it).
D) The air filter is a miniature version of an old-time car air filter. The glaring exception is the air filter hanging off the side - I can see this part's going to be replaced at some point when I throw it in a truck bed. In this case, the air filter is just thrown in loose inside the box - mine broke one of the gauge glasses. will send out small parts, but it's a PITA to get a product this good only to have to fix it right out of the box.

Quick Flow 3-in-1 Air Compressor | Wagan 2014
Wagan 2014
$29.99 >> $17.49
by Wagan

Comes with 10-foot power cord that plugs into 12-volt car cigarette lighter
Comes with 1 sports needle and 2 nozzle adapters
Inflates average tires in 5-7 minutes
Built-in work/emergency light
275 PSI high pressure air compressor

found in 2014's description: We doubt you'll be able to find a more versatile compressor for the price. --Kris Jensen-Van Heste

Product Description
The Wagan 3-in-1 Air Compressor is perfect for vehicles, bike tires, balls, air mattress, and more. The special features include a high pressure compressor that generates 275 PSI, high air flow inflator for quick inflation, built-in light, and pressure gauge.

Product Description
Handy portable air pump runs from the car cigarette lighter. Be prepared for the unexpected with 12V tire air inflators. Air Pump Inflates: Bike Tires, Car Tires (SUV, Truck), Athletic Balls, Air Mattresses, Rafts, Inflatable Furniture, Air Tools. Air Pressure (max)of Tire Inflator: 275PSI Special Features of this 12 Volt Auto Air Inflator: High Pressure 275 PSI High Air Flow Inflator Built-in Work light/Emergency light Inflates average sized tires (16') in 5-10 minutes Pressure Gauge Reader Continuous Usage Time: Tire Inflator Has A Heavy Duty Motor. Accessories: 3 Nozzle adapters: collar, tire inflator nozzle, sports needle 12V Power Cord: 10 ft cord High Pressure Air Hose: 14' Air Hose with quick release valve connector Power Source of Tire Inflators: 12V cigarette lighter accessory receptacle Low Power Consumption.
found in 2014's reviews:
Piece of junk - You can pick up a blow dryer for your hair for about same price; and it will work for a few years, For this product to just stop working after a few uses indicates this manufacturer has no qualms about selling defective merchandise.
Amazon should dump this product.

Slow but reliable - Got tired of local gas stations with broken air pumps, so I got this little dude. If it were faster, it would be a five-star product.
/ FP18KIT 18-Gauge Brad Nailer Compressor Combo Kit | Senco PC0947
Senco PC0947
$249.00 >> $197.00
by Senco

1-year warranty on nailer; 90-day warranty on compressor
Includes nailer, 1/4-inch -by-25-foot hose, safety glasses, fittings, oil, 1,200 brad nails, wrenches, and manuals
Compressor: 1 horsepower, 2-1/2 gallons; aluminum cylinder with steel sleeve; 20 pounds
Nailer: adjustable depth of drive, rear exhaust, easy-open latch, no-mar pad, low-load indicator
18-gauge brad nailer and 1-gallon compressor combo kit

found in PC0947's description:

FinishPro 18 FEATURES

  • Extra power — Drives fasteners up to 2" in hard wood applications
  • Belt hook — For convenience
  • Adjustable depth-of-drive
  • Rear exhaust — Keeps oil and dust away from work surface
  • Easy-open latch — For quick and comfortable loading
  • Hardened steel driver — For extended life
  • Full soft grip — For comfort and control
  • Low load indicator — Visible fastener indication
  • No-mar pad — To protect work materials
  • One-year warranty
  • Includes case, fitting, oil, hex wrench and fastener rebate

Projects
Baseboard,cabinets, casebacks, chair rail, finish and trim, furniture frames, furniture trim, mirror and picture frames, trim

FinishPro 18 SPECIFICATIONS

  • Power (in/lbs): 168
  • Height: 9.3 bar)
  • Mode of Operation: Restrictive Trigger

Fastener Types

  • Gauge: 18
  • Fastener Range: 5/8"—2"
  • Finish: Galvanized

What's in the Box
This kit comes complete with the FinishPro 18 brad nailer, a Senco 1/2 hp (1 hp peak), 1-gallon compressor, 1/4-by-25-foot coil hose, safety glasses, fittings, tool oil, variety pack of 1,200 brad nails, tool wrenches and manuals.

Product Description
Finish Pro 18 Combo Kit, Perfect For Woodworkers & Punch List Contractor, Kit Includes, Lightweight Oilless, 1HP Compressor, Finish Pro 18 Brad Nailer 5/8" To 2", Hose, Fittings, Sample Pack Of Brads, Safety Glasses & Bottle Of Oil.
found in PC0947's reviews:
Senco PC0947 - This is an outstanding product. Not a single hitch and the product works perfectly.
compressor try's hard but comes up a bit short - I agree with the other reviewers who have given praise to this product.
Of course it was the compressor which broke, the part with the 90 day warranty.
Senco is a good company, but I think this little compressor is not quite up to the quality of their other products.
In my case it was the 1/4" copper tubing which brings the air to the tank that failed.
I have fixed it with some liquid steel, since I'm on a job with it, I'm hoping the repair lasts till I have time to replace to tubing.
I have used this to build two large bookcase and cabinet projects so far, and in doing so I have learned the compressors limitations. I bought this combo for the light weight
of the compressor, so I guess there must be some compromises. This won't take the place of more powerful compressors,
but it is great for carrying to and from a job. I'm not sure I would
recommend this product, the 90 day warranty on the compressor is a big negative.

Think twice - The compressor cannot build up pressure to run the nailer. Buy this product and deal with Senco at your own risk.
I used this product - I too had a problem with the 1/4 tubing that is attached to the compressor it cracked right where it bends I used to intall wainscotting and it worked fine.

15 Amp 2 Horsepower 6-Gallon Oil-Free Pancake Compressor | Porter-Cable CPFAC2600P
Porter-Cable CPFAC2600P
$316.16 >> $167.00
by Porter-Cable

32 pounds; 1-year warranty
Includes compressor, ASME safety valve, regulator, gauges, 1/4-inch quick coupler, manual
Cast-iron construction
Provides 3.7 cfm at 40 psi and 2.6 cfm at 90 psi; air-regulator and quick-connect coupler
15 amp, 2-horsepower, 6-gallon oil-free pancake compressor; handle; built-in thermal overload protector

found in CPFAC2600P's description: com Review
This Porter-Cable 2-horsepower, 6-gallon pancake compressor transports easily but has plenty of capacity and power--enough to support heavy use of brad and finish nailers and moderate use of framing nailers. The 120-volt universal motor starts easily in cold weather and draws only 10 amps--so you won't have to worry about tripping breakers inside residential homes--and you can use it with an extension cord. Features include a high-flow regulator, an easy-to-read air pressure gauge, automatic thermal overload protection, an industrial-style quick-connect body in the air outlet, and a long-life motor with replaceable brushes. The compressor weighs 32 pounds and has a handle built into the motor housing, so it's relatively portable. This Porter-Cable is as convenient and easy to use as any compressor out there, and it's just about ideal for brad and finish nailers that are being used inside people's homes on a regular basis. --Jonathon Tudor

From the Manufacturer
This oil-free 2-hp pancake-style air compressor has a new high pressure design that provides 28-percent more usable air! This allows more run time and less down time. The high-flow regulator keeps the tank pressure between 120 PSI and 150 PSI, allowing a greater reserve air capacity. Lightweight for portability, this compressor has plenty of power to fire all brad and finishing nailers as well as moderate usage of roofing and framing nailers. Includes compressor, high flow air regulator and gauges, quick coupler, and instruction manual.8 HP Running
  • Built-in automatic thermal overload protection
  • Larger Easy to read regulated air pressure gauge
  • Universal, High-FloSM, push-to-connect coupler in air outlet
  • One year warranty
  • 150 PSI - 10 gallon equivalent tank size as compared to conventional 125 PSI model
  • 87 Dba
  • Oil-free pump design for durability and no maintenance
  • Long-life motor with replaceable brushes
  • High-FloSM air regulator for more work at higher pressure (125 PSI start and 150 PSI stop pressure switch)
  • 6 gallon tank supports heavy usage of stapler, brad and finish nailer, standard-to-heavy roofing and standard framing nailer
  • 120 Volt, universal motor starts easily under low voltage conditions
  • Extension cord use without tripping circuit breakers
  • Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual

    SPECIFICATIONS

    • Lubrication: Oil Free
    • Gauges: 2
    • Quick Couple: 1/4" NPT
    • Weight (Lbs.8
    • Amps @115 Volts: 10
    • Max. PSI: 150
    • SCFM Air Delivery @40 PSI: 3.7
    • SCFM Air Delivery @90 PSI: 2.

      Product Description
      2 HP, 6 Gallon, Oil-Free Pancake Air Compressor, 150 PSI Maximum Tank Pressure, 3.6 SCFM @ 90 PSI 87 DBA, 15 AMPS, Built-In Thermal Over Load Protection, Hi-Flo Air Regulator With Quick-Connect Coupler, Regulated Pressure Gauges, Includes ASME Safety Valve, 1 Year Warranty.
      found in CPFAC2600P's reviews:
      Terrible - I had this compressor for about 4 months. Seems PC is selling an unreliable product.
  • 15 Amp 2-3/4 Horsepower 4 Gallon Oiled Single Hot Dog Compressor | DeWalt D55155
    DeWalt D55155
    $676.00 >> $365.00
    by DeWalt

    23 by 23 by 13-1/2 inches; 68-1/2 pounds; 1-year warranty
    Includes DEWALT synthetic compressor oil and pressure regulator
    Cylinder constructed of cast iron
    4-1/2 cfm delivered at 100 psi; dual soft start valve for cold-weather starts; oil-lubricated pump
    15 amp 2-3/4-horsepower 4-gallon oiled twin hot dog compressor with carrying handle

    found in D55155's description: com Review
    At just a foot high and less than two feet wide out of the carton, this compressor was quite a bit smaller than we expected, so to be fair, we quickly lowered our expectations. The joke was on us, though, because this little powerhouse just doesn’t quit, and we learned that you can’t judge a compressor by its size. Emglo’s half-century in the compressor business is evident in this model, and with a couple of small exceptions (we’ll get into that in a minute), we don’t think anyone could make a finer piece of air power. Now, this may be a plus or a minus in your book, but we liked the fact that the compressor is factory set to power on at 100 psi an+d shut off at 120 psi, and the cycle time was under 15 seconds.) It has air aplenty for two nailers at once, and with that fast recovery, the job will get done in no time.

    In balance, this is one of the best compressor’s we’ve seen for the size, power, ruggedness and incredible portability it offers. Here’s to a great pairing of two great toolmakers.--Kris Jensen-Van Heste

    Product Description
    DeWalt's 2-horsepower, 4-gallon compressor features an oil-lubricated design with a cast-iron cylinder to guarantee job site durability. The D55155 is overload protected, as well, and delivers 4-1/2 cfm at 100 psi while still drawing less than 15 amps. The new roll-cage design and integrated control panel protects the compressor and the controls from accidental damage. Carrying the compressor is easy, too: the flat design lets the user tote the compressor comfortably like a suitcase. The package comes with the initial fill of DeWalt synthetic air compressor oil.

    From the Manufacturer
    This 4-gallon hand-carry compressor was designed to meet the tough demands of the job site. The handle is situated to allow the user to carry the compressor with one hand in a natural walking position.5 cubic feet per minute at 100 psi, and draws less than 15 amps. The roll cage and integrated instrument panel protect the compressor and instruments from damage. Comes with the initial fill of DeWalt's synthetic air compressor oil.5 cubic feet per minute delivered at 100 psi, recovers in less than 15 seconds

  • New ergonomic design for easy portability
  • Protected components for maximum durability
  • Oil-lubricated pump allows for increased life
  • ASME-coded, 4-gallon, OSHA-recognized tank
  • Dual soft-start valves assist in cold weather startup
  • Ball valve drain allows for quick and thorough tank draining
  • Cast-iron cylinder enhances pump life
  • CSA approved

    Specifications

    • Drive: direct drive
    • Horsepower: 2-3/4 max hp
    • Tank size: 4 single ASME tank gallons
    • Power supply: 120-volt AC, 15 amps, 60 Hz, 2-pole induction motor
    • Cubic feet per minute at 100 psi: 4.

    Includes

    • DeWalt synthetic compressor oil
    • 2 universal quick couplers
    • Regulator

    Warranty
    This DeWalt high-performance industrial tool comes with a warranty package that includes:
    30-day, no-risk satisfaction guarantee
    One-year free service contract
    One-year warranty

    Product Description
    2 HP, 4 Gallon, Electric Single Tank Hand Carry Compressor, 4.
    found in D55155's reviews:
    Wonderful Product - First let me say that if it is Dewalt, I want it! I purchased this compressor to use to fix my roof after the hurricanes this year and to build my new house in a few months. And it puts out the air. Great product!.
    Regulator Problems - Do not buy this product if you intend to use it.
    Other tools - However, I use it primarily with other air tools including an impact wrench. I was a little worried about the 4 gallon reserve tank handling my impact wrench air volume which is the most common tool I use for odd jobs.

    If you're looking for a product that can do it all, I would recommend this unit.
    Good machine, but some packaging and assembly issues - To my dissatisfaction, it arrived with a broken air filter and some loose items rolling around in the air tank. No, it wasn't the air filter parts, it was something metalic actually inside the closed tank! Amazon referred me to DeWalt who referred me to my local service center.

    Thanks to Amazon's incredibly fast and hassle-free process for returns, I had my replacement compressor less than a week later. Unfortunately, it too had a broken air filter. But since everything else was fine, I bought a filter locally (DeWalt's replacement has yet to arrive) for $10 and kept the compressor. Another surprise with the second shipment was the inclusion of oil, a dipstick, instructions to add oil, and a product manual. This was not in the first shipment and is REQUIRED before starting the unit which is something that as a first-time compressor buyer, I would not have known to do.

    Dewalt and Emglo make a complete package, great compressor! - Someone decided they needed my trim compressor more then I did so I had to purchase another one. I must admit I was not to broken harted about it though because I have had my eye on Dewalt's new compressor now for some time. The sleek design, the way it protects its gauges, and its 2 quick conect air ports kept calling me every time I saw this compressor. I was not disapointed!! The unit is a little heavy for a portable compressor at over 60 lbs. Inside a house a compressor's noise can seem to be greatly magnified but this unit seems almost quiet, it runs so smooth. I had a larger compressor for framing but this Dewalt compressor has done so well that I have sold my larger one and rely on just this one. The unit really has no real flaws at all the air drain has a great little lever to drain the tank with, but it does blow out hard if you open it to quick and I am not convinced it drains all the condesation real well. There is a little black breaker on the compressor unit which can be a little dificult to locate and reset, it would be nice if on a newer version Dewalt would move it to the front with the gauges and quick connects. It has triped several time on us if we try and run too many things at a time such as a miter saw, table saw, and the compressor, but for normal use the draw of this compressor seems fine even on a 15amp breaker.
    To sum it all up this is one really nice complete package compressor!! It is small enough for the little jobs yet tough enough for the more demanding jobs, within reason, remember it is only a 4 gallon, running at less the 15amp, compressor. With Dewalt and Emglo combine you will not go wrong buying this compressor, and unless you get a defective unit which happens with all products from time to time, you will have a compressor that should last a long time. Another great product from Dewalt thanks!! One last suggestion for Dewalt; (this unit is so great you might want to make an oiless version for people "like myself" who tend to be forgetful about stuff like, adding oil!!!).

  • 13.8 Amp 3 Horsepower 5 Gallon Oiled Wheeled Single Hot Dog Compressor | Makita MAC5200
    Makita MAC5200
    $544.00 >> $319.00
    by Makita

    29 by 19 by 19-1/2 inches; 88 pounds; 1-year warranty
    1/4-inch brass Makita universal coupler
    Cast-iron pump and roll cage construction
    6-1/2 cfm delivered at 90 psi; low 1,720 rpm extends motor life and lowers noise
    13.8 amp, 3-horsepower, 5-gallon oiled wheeled single hot dog compressor and folding handle

    found in MAC5200's description: com Product Review
    Whether you need a compressor for woodworking, painting, caulking or construction, this 5-gallon Makita is a great choice, primarily because of its impressive 6-1/2 cfm at 90 psi on a 13.8 amp draw and easy portability.



    Product Description
    Rugged Wheels - Jobsite portability. Built-in Storage Compartment - Conveniently stores air fittings & accessories. Air Hose Wrap - Stores 50 of 3/8" Air Hose with handle folded or upright. Large automotive style industrial air filter for increased air intake and greater efficiency.
    found in MAC5200's reviews:
    Good Product - I am very pleased with this air compressor.
    MAC5200 Arrived Damaged - Can't yet rate the product.
    Excellent product. - I think the unit will handle all of my compressor needs.
    MAC5200 - Excellent product.
    Hunk of Junk - DO NOT BUY THIS PRODUCT!.

    18 Gauge Brad Nailer Compressor Combo Kit | Porter-Cable CFBN200A
    Porter-Cable CFBN200A
    $423.00 >> $175.00
    by Porter-Cable

    1 year limited warranty
    Complete kit with quick-connects, 25' 150 psi air hose, thread sealing tape, nailer case, and wrenches
    Oil-free compressor produces 3.7 scfm at 40 psi and 2.7 scfm at 90 psi
    Nailer features cushion grip, depth of drive, quick-release nosepiece, and directional exhaust
    Professional nailer shoots 3/4" to 2" 18 gauge brad nails

    found in CFBN200A's description: Here they've packaged their hard-working 18-gauge brad nailer with its power source--a 15 amp, 120-volt, 6-gallon compressor driven by a 2-horsepower oil-free motor. Fill up the nailer with standard 18-gauge brads from 3/4 inch to 2 inches long, hook up, and you're ready to install baseboards, chair rails, moldings, even make quick work of those wooden craft items like country shelves and vegetable bins. The kit comes with quick connects, 25 feet of 150 psi air hose and thread sealing tape.
    found in CFBN200A's reviews:
    Great product delivers almost everything promised - The tool is flawless and the uses for readily available compressed air keep on coming. Ordering from Amazon was easy and the product arrived on time in excellent condition.
    14.5 Amp 2 Horsepower 4 Gallon Oiled Twin Hot Dog Compressor | Hitachi EC12
    Hitachi EC12
    $417.29 >> $207.00
    by Hitachi

    60 pounds; 1-year warranty
    Includes DEWALT synthetic compressor oil and pressure regulator
    Cylinder constructed of cast iron
    4.1 cfm delivered at 90 psi; shut-off valve at line and auto reset
    14-1/2 amp 2-horsepower 4-gallon oiled twin hot dog compressor with carrying handle

    found in EC12's description: com
    Hitachi’s 2-horsepower compressor is one of the hardest-working units on the market.1 cfm of free air at 90 psi--enough to easily run two tools at once. Because of its compact size and trim weight, it’s the perfect compressor for the home do-it-yourselfer, but taking into account its power and portability, contractors will love it, too.5 amps, so you won’t find yourself blowing fuses or popping breakers. Hitachi’s known for workhorse tools, and this one is a prime example.--Kris Jensen-Van Heste

    From the Manufacturer
    This Hitachi air compressor is powered by a 2 hp, 115-volt direct-drive motor and oil lube pump at 3,450 rpm.5 amps, so it won't overheat electrical circuits.1 cfm of free air, at 90 psi.

    From the Manufacturer
    The Hitachi EC12 air compressor is powered by a 2-horsepower, 115-volt direct-drive motor and oil lube pump at 3,450 rpm.5 amps, so it won't overheat electrical circuits. It delivers 4 cubic feet per minute of free air at 90 psi.3-gallon capacity
  • Comes standard with line regulator and gauges
  • O-ring on draincock makes valve easy to open and close
  • Pressure switch has start/stop control at 100 and 125 psi with 14-second recovery time
  • 15 amp motor runs at 3,450 rpm, providing 8.2 cubic feet per minute of free air

    Specifications

    • Horsepower: 2
    • Amps: 15
    • Speed: 3,450 rpm
    • Air displacement: 8.

      Product Description
      Hitachi EC12 15 Amp 3450RPM, 8. Oil lube single piston compressor type, line regulator with gauge, direct drive electric motor, suction cup feet for extra stability, O-ring on draincock makes valve easy to open and close and resists stripping, vertically stacked twin tanks.
      found in EC12's reviews:
      Tremendous product, good value - The unit has no difficulty running on a 15 amp circuit in my house with older wiring (I was expecting many trips to the breaker box - I have yet to trip one.

      This becomes the third Hitachi tool product I have purchased, and the quality of their products continues to impress me.
      Compressor great, regulator bad - This compressor is a great value. It has a quality oil lubricated motor and is competitively priced with "oil-less" compressors of similar size and capacity. It works great with my various small air tools (palm nailer, impact wrench, etc). If Hitachi included a better regulator, they would have a 5 star product.
      EC12 Cold Start Problems - The Hitachi EC12 is a very solid contractor compressor. While these problems occur across the board among compressor manufacturers, there is a product that helps eliminate the issue. Called the Smart Start by Conrader it replaces the standard inlet filter of the compressor.
      Zero stars for Amazon & Tool Crib - Based on the fantastic reviews, I decided to purchase this compressor. The box arrived, and when I opened it, I was a little surprised at how little packing material there was - just a box with the compressor inside. This may be a great product, but I'll buy my major hardware purchases locally, so I can return broken products.

  • Air Amp Compressor Product - 1   2   3

    Porter-Cable (27)
    Campbell Hausfeld (18)
    DeWalt (14)
    Emglo (10)
    Thomas Compressors (9)
    Bostitch (9)
    Makita (6)
    Hitachi (5)
    Porter Cable (4)
    Grip Rite (3)
    GRIP-RITE (2)
    Palmgren (2)
    Black & Decker (1)
    Ingersoll Rand (1)
    Wagan (1)
    Stanley Hand Tools (1)
    AccuSet (1)
    Q Industries (1)
    Senco (1)
    Xantrex Technologies (1)

    Other Searches:

    Air Amp Compressor Product
    Air Compressor Product
    ©2006