12 volt high volume air compressor - DeWalt D55271, DeWalt D55250, Wagan 2014, Porter-Cable C6110, Porter-Cable CPF23400P, Porter-Cable CPFC2TV3525VP, Dewalt D55168, Porter-Cable CPL6025, Porter-Cable CPF6025VP, Porter-Cable C5101

12 Volt High Volume Air Compressor - 1 2 3 4 5 6 7 8

*8 Horsepower 8-Gallon Oiled Twin Pontoon Gas Compressor* \| DeWalt D55271**
	$2,814.37 >> $1,679.00 by DeWalt Low oil shut off provides greater engine protection 8 HP Honda OHV GX gas engine provides proven reliability and durability Low profile design for easy maneuverability Quad cylinder, cast iron, oil lubricated pump 16.2 cfm delivered @ 100 psi for high volume applications found in D55271's description: 2 cubic feet per minute @ 100 psi, while the low-profile design of the compressor means less operator fatigue and maximum job site maneuverability. The compressor includes a 3/8-inch regulator and an initial fill of DeWalt synthetic air compressor oil.2 cubic feet per minute delivered at 100 psi for high-volume applications Quad-cylinder, cast-iron, oil-lubricated pump with Emglo's 50 years of proven durability and reliability Low-profile design for easy maneuverability 8-horsepower Honda OHV GX gas engine provides proven reliability and durability Low-oil shutoff provides greater engine protection Automatic idle control for reduced fuel consumption Pneumatic tire improves worksite mobility Ball valve drain allows for quick and thorough tank draining Specifications Drive: belt drive Horsepower: 8 hp Tank size: 8 gallons Power supply: Honda gas OHV GX engine Cubic feet per minute at 100 psi: 16. Includes DeWalt synthetic compressor oil 3/8-inch NPT pressure regulator Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty.
*4 Horsepower 4 Gallon Oiled Twin Hot Dog Gas Compressor* \| DeWalt D55250**
	$1,539.18 >> $692.00 by DeWalt Protected components for maximum durability Oil lubricated pump allows for long life Low oil shut off provides greater engine protection Automatic idle control for reduced fuel consumption 4 HP Honda GX gas engine provides proven reliability and durability found in D55250's description: Product Description 4 HP, 4 Gallon, Gas Twin Stack Compressor, High Volume Air Output 4.5 CFM @ 100 PSI, Portable Air Power Honda 4 HP Gas, Automatic Throttle Idle Control, Direct Drive Pump For Improved Portability, Oil Lubricated Improved Compressor Life.

*Quick Flow 3-in-1 Air* Compressor \| Wagan 2014**
	$29.99 >> $17.49 by Wagan Comes with 10-foot power cord that plugs into 12-volt car cigarette lighter Comes with 1 sports needle and 2 nozzle adapters Inflates average tires in 5-7 minutes Built-in work/emergency light 275 PSI high pressure air compressor found in 2014's description: com Review It's about time somebody came out with one of these--hats off to Wagan! It's small, light, inexpensive, and needs only a 12-volt power supply. We doubt you'll be able to find a more versatile compressor for the price. --Kris Jensen-Van Heste Product Description The Wagan 3-in-1 Air Compressor is perfect for vehicles, bike tires, balls, air mattress, and more. A 12-volt power supply is all that is needed to run the unit. The special features include a high pressure compressor that generates 275 PSI, high air flow inflator for quick inflation, built-in light, and pressure gauge. Product Description Handy portable air pump runs from the car cigarette lighter. Be prepared for the unexpected with 12V tire air inflators. Air Pump Inflates: Bike Tires, Car Tires (SUV, Truck), Athletic Balls, Air Mattresses, Rafts, Inflatable Furniture, Air Tools. Air Pressure (max)of Tire Inflator: 275PSI Special Features of this 12 Volt Auto Air Inflator: High Pressure 275 PSI High Air Flow Inflator Built-in Work light/Emergency light Inflates average sized tires (16') in 5-10 minutes Pressure Gauge Reader Continuous Usage Time: Tire Inflator Has A Heavy Duty Motor. Accessories: 3 Nozzle adapters: collar, tire inflator nozzle, sports needle 12V Power Cord: 10 ft cord High Pressure Air Hose: 14' Air Hose with quick release valve connector Power Source of Tire Inflators: 12V cigarette lighter accessory receptacle Low Power Consumption.
*15 Amp 2 Horsepower 25 Gallon Oil-Free Wheeled Vertical Compressor* \| Porter-Cable C6110**
	$295.55 >> $319.99 by Porter-Cable Cushioned handle grip, Standard Equipment: Compressor, High-FloSM air regulator and push to connect coupler and operating manual. Oil-Free Pump - No maintenance or spilled oil, Vertical tank configuration takes less floor space .9 (running) HP induction motor for long life, High-FloSM air regulator and push to connect coupler 150 PSI max for longer tool run time, 120 PSI cut-in pressure provides 30 PSI "Bonus Air" before a 90 PSI tool becomes inoperable 5.4 SCFM for faster tank recharge of 25 gal tank found in C6110's description: From the Manufacturer This oil free, space saving vertical, wheeled portable air compressor from Porter-Cable provides 25 gallons of air tank reserve at a 150 PSI maximum pressure which provides 71 percent more usable air over traditional 125 PSI maximum air pressure units operating tools that require 90 PSI. With a pressure switch controller that automatically restarts the motor at the 120 PSI falling tank pressure point you get this quicker motor/pump operation and bonus air delivery. Supports all nailing applications and moderate + air tool usage of most air tools. A 120 volt, 1. High air flow regulator, high flow quick coupler two gages are also included. Reserve air tank is ASME approved.
*3 HP, 4-Gallon Pancake Compressor* \| Porter-Cable CPF23400P**
	$415.00 by Porter-Cable One Year Warranty Supports use of all brad and finish nailers and moderate use of framing and roofing nailers High-flow regulator allows more work at higher pressures 3 hp induction motor for quieter operation High-pressure technology provides more usable air for longer run time found in CPF23400P's reviews: good unit for the price - although i do take my large compressor i find the unit that usually comes out of the truck is this one.BUT IT'S A COMPRESSOR. if you have a need for a lightweight fairly high SCFM unit, this might fit the bill. *Maybe a good compressor, but beware of shipping* - I ordered my P-C 3HP/4GAL compressor from Amazon, and their tool supplier, Tool Crib, shipped the unit to me via UPS. When I unpacked the compressor there was a broken piece of plastic in the bottom of the box. After reading the Owner's Manual and starting the break-in procedure I realized the plastic piece was the on/off switch! Using plastic for such a high-use piece like the on/off switch is a very poor design. I took the compressor to the local Porter-Cable service center and they tell me the boxes the P-C compressors come in are NOT designed to handle the rigorous treatment of UPS shipping. The compressor is very heavy and the support inside the box is just flimsy cardboard, so the unit will shift alot during UPS shipment. Be advised about this shipping problem with this compressor. *A good compressor* to get you started. - I shopped extensively for a light duty compressor based on the following criteria: price, weight, and flow rating. It features the same motor and compressor as the PC 3HP twin stack model but is $40 cheaper and about 10 pounds lighter. Other than that what can I say - it pumps air. Supposedly it runs at higher pressure (135 psi max) than its competitors. It is fairly loud, but I haven't listened to many other models to make an educated comparison. I have used it quite a bit for high air flow operations, such as blowing off dust / debris and even running an air chisel to bust up concrete. It often runs full time for 5-10 minutes and is able to keep up with air demand. If you are going to be regularly moving the compressor around, spend the extra. I actually ran a compressed air line out to my garage, so the compressor can stay put in the basement and avoid potential damage from moving it. * 4-year update * I have owned this compressor for 4+ years now and am still completely satisfied. I used a hand held, air chisel to break up the mortar joints. The compressor was operating at 100% duty cycle for 10-15 minutes at a stretch, but couldn't quite keep up with continuous use of the air chisel. As an last ditch experiment, I bought a 10 gal portable air storage tank, some extra quick disconnect fittings and rigged up a reserve tank in parallel with the 4 gallon PC tank. (yes, I am an engineer) My thinking was that I would run the crap out of my little PC and if it bit the dust, that was my excuse to buy a new compressor. I am amazed to say the PC compressor** ran flawlessly for the entire chimney demo and still works fine today.
*15 Amp 3.5 Horsepower 25-Gallon Oil-Free Wheeled Vertical Compressor* \| Porter-Cable CPFC2TV3525VP**
	$707.47 >> $359.96 by Porter-Cable 5-year limited warranty Provides 5.6 scfm at 40 psi and 5.1 scfm at 90 psi High-flow regulator for more efficient operation of pneumatic tools Tank pressure is maintained between 145 and 175 psi for more usable air High-pressure technology provides the equivalent of a 60-gallon air supply found in CPFC2TV3525VP's description: From the Manufacturer This 25-gallon vertical air compressor is a real performer with a high-pressure design that allows more usable air to be stored in the tank. It's like being able to fit 60-gallons of air in a 25-gallon tank, giving you a longer time between refills, you'll get more done. The powerful induction motor and high-pressure pump deliver 5. A higher flow regulator starts the pump at 145 psi and stops it at 175 psi for more pressure and airflow. Includes compressor with high-flow, high-pressure regulator and gauge, 1/4-inch quick coupler, and operator's manual.6 HP Running 175 PSI - 60 gallon equivalent tank size as compared to conventional 125 PSI model 82 Dba High-FloSM air regulator (145 PSI start and 175 PSI stop pressure switch) and High-FloSM quick connect coupler Provides the highest level of moderate-to-heavy duty, tool operation in its class Direct-drive, twin cylinder, oil free design for duability and no maintenance 120 Volt high-torque, capacitor start induction motor for reliable starting Longer life and quieter operation with "4 Pole" 1725 RPM motor Large air regulated pressure gauge for easy visibility and better accuracy Cushioned handle for comfortable grip Shroud with integrated air intake filter improves cooling and reduces noise Standard Equipment: Compressor, ASME safety valve, air regulator and gauges, 1/4" quick coupler, and operating manual SPECIFICATIONS Lubrication: Oil Free Tank Size Gal.6 Amps @115 Volts: 15 Max. PSI: 175 SCFM Air Delivery @40 PSI: 5.6 SCFM Air Delivery @90 PSI: 5.): 120 Shipping Weight (lbs. Product Description 25-gallon tank, 15 amps @ 115 volts, 175 PSI, SCFM Air Delivery 5.1 @ 90 PSI, Pressure release, Regulator, 2 gauges, Standard equipment: Compressor, ASME safety valve, air regulator and gauges. found in CPFC2TV3525VP's reviews: Quiet, portable and powerful - I shopped around for weeks before I decided on this compressor. I wanted a compressor for home that I could run an impact on or a DA sander but I also wanted something portable that I could run a nailer on. I had planned to buy two compressors but this compressor will do both. This compressor is surprisingly quiet and is quite powerful. The two stage allows it to provide the power of a compressor twice it's capacity and uses twice the horsepower.) So if you're buying one for home or stationary use that will be run a lot, look at buying a 2-stage 240 volt compressor, it will save you money when the electric bill comes. Recovery time is what you should look for and don't expect any compressor to keep quiet for long when you're running a continuous tool like a sander. Something to consider if you're serious about buying this compressor is look at the CPFC2TV3520WK, it's the same compressor with a 20 gallon horizontal tank but it has a four port remote regulator which might be of use or interest to you. I'll post again in the future once I've used the compressor more and know it a little better. I would recommend renting a compressor or borrowing one from someone who has it prior to making your decision if you haven't used them enough to know what you want from one. Not too big or too small - Can run my air ratchet or 1/2' impact quite a long time without turning on. A sander (especially a high-speed unit) uses an awful lot of air and under heavy sander use I think this unit would be "strained". Bottom line if you need a compressor but the smaller 15 to 20 gal types are not enough and a big 60 to 80 gal. is too much check this out you'll be glad you did! It seems to fit right in the middle offering good performance, relative quiet, ease and convenience of use and reasonable portability in a high quality well built unit. Overall I'd rate it a solid value and highly recommended. Good Compromise - The compressor is very easy to set up and use. The compressor has a very solid feel and is very heavy. They are adequate for moving the compressor around the garage, but would not work well on stairs or outside. In my opinion the compressor is loud, particularly if you are in a closed room. However the rumble of the motor is much more tolerable than the high pitched whine of some of the other compressors I checked out.
*Heavy Duty 15 Gallon Heavy Duty Wheeled Portable Workshop Compressor* \| DEWALT D55168**
	$619.00 >> $359.00 by Dewalt Efficient high pressure motor allows the compressor to be run with an extension cord due to the low amp draw of the compressor Oil free, maintenance free pump, for convenient use Efficient high pressure technology allows for longer pump and motor life 5.4 SCFM @ 90 PSI allows for quick compressor recovery time 200 PSI max pressure allows for longer air tool run time found in D55168's description: From the Manufacturer The DeWALT D55168 is heavy-duty, 200 PSI, 15 gallon, vertical portable, 120 volt electric, workshop compressor built to stand up to the needs to the most demanding workshop end user. Ideal for automotive and equipment maintenance, auto restoration, and woodworking applications, the D55168 can easily operate high air consumptions air tools such as: impact wrenches, ratchet wrenches, paint sprayers, and air sanders. In addition, the D55168 features a typical robust DeWALT design that features a roll cage and metal panel that protect the compressors critical components.

*6 HP, 25-Gallon Oil Lube Compressor* \| Porter-Cable CPL6025**
	$504.99 by Porter-Cable One-year warranty Provides 8.6 SCFM at 40 PSI and 6.8 SCFM at 90 PSI High-flow regulator for more efficient operation of pneumatic tools Tank pressure is maintained between 110 and 135 PSI for more usable air High-pressure technology provides the equivalent of a 32-gallon air supply
*6 HP, 25-Gallon Oilless Vertical Air* Compressor \| Porter-Cable CPF6025VP**
	$449.99 by Porter-Cable One-year warranty Provides 8.3 SCFM at 40 PSI and 5.8 SCFM at 90 PSI High-flow regulator for more efficient operation of pneumatic tools Tank pressure is maintained between 110 and 135 PSI for more usable air High-pressure technology provides the equivalent of a 32-gallon air supply
*15 Amp 1-1/2 Horsepower 20 Gallon Oil-Free Wheeled Single Hot Dog Compressor* \| Porter-Cable C5101**
	$280.60 >> $292.80 by Porter-Cable Full shroud for pump/motor protection, Cushioned handle grip, Standard Equipment: Compressor, High-FloSM air regulator and push to connect coupler, pneumatic tires and operating manual. Oil-Free Pump - No maintenance or spilled oil, Full pneumatic tires for ease of mobility 1.7 (running) HP induction motor for long life, High-FloSM air regulator and push to connect coupler 150 PSI max for longer tool run time, 120 PSI cut-in pressure provides 30 PSI "Bonus Air"before a 90 PSI tool becomres inoperable 5.7 SCFM for faster tank recharge of 20 gal tank found in C5101's description: From the Manufacturer This oil free, horizontal low profile, wheeled portable air compressor from Porter-Cable provides 20 gallons of air tank reserve at a 150 PSI maximum pressure which provides 71 percent more usable air over traditional 125 PSI maximum air pressure units operating tools that require 90 PSI. With a pressure switch controller that automatically restarts the motor at the 120 PSI falling tank pressure point you get this quicker motor/pump operation and bonus air delivery. Supports all nailing applications and moderate air tool usage of most air tools. A 120 volt, 1. High air flow regulator, high flow quick coupler two gages are also included. Reserve air tank is ASME approved. found in C5101's reviews: Porter-Cable C5101 15 Amp 1-1/2 Horsepower 20 Gall... - Excellent compressor* for the handyman's garage. All the pressure and volume you need.*